manufacturer category series package voltage class rev . date ec39 series ? rohs compliant (pb-free) ? lvcmos output ? 1.8v supply voltage ? ceramic smd package ? stability to 20ppm ? standby function ? available on tape and reel ecliptek corp. oscillator ec39 ceramic 1.8v os1f 08/08 oscillator ec39 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 1.3 l 5.0 w 3.2 frequency range (f o ) operating temperature range (otr) storage temperature range (str) supply voltage (v dd ) input current (i dd ) frequency tolerance/stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time (t r /t f ) duty cycle (sym) load drive capability (c load ) tri-state input voltage standby current start up time (t s ) rms phase jitter 2.500mhz to 10.000mhz 10.001mhz to 34.999mhz 35.000mhz to 50.000mhz 50.001mhz to 70.000mhz 70.001mhz to 90.000mhz 90.001mhz to 106.250mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration i oh = -4.0ma i ol = +4.0ma 20% to 80% of waveform < 40.000mhz 20% to 80% of waveform > 40.000mhz at 50% of waveform no connection v ih : 90% of v dd minimum v il : 10% of v dd maximum disabled output: high impedance 12khz to 20mhz offset frequency 2.5mhz to 80mhz and 98.304mhz, 100mhz, 106.250mhz -10c to 70c -40c to 85c -55c to 125c 1.8v dc 5% 3ma maximum 4ma maximum 8ma maximum 10ma maximum 18ma maximum 25ma maximum 100ppm, 50ppm, 25ppm, or 20ppm maximum 90% of v dd minimum 10% of v dd maximum 6 nseconds maximum 3 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 15pf maximum enables output enables output disables output: high impedance 10a maximum 10 mseconds maximum 1pseconds maximum notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec39 ceramic 1.8v os1f 08/08 ec39 00 et t ts - 30.000m tr frequency tolerance / stability 00=100ppm maximum (standard) 45=50ppm maximum 25=25ppm maximum 20=20ppm maximum operating temperature range blank=-10c to 70c (standard) et=-40c to 85c part numbering guide *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage packaging options blank=bulk (standard) tr=tape and reel frequency duty cycle blank=50 10(%) (standard) t=50 5(%) marking orientation 3.20 0.20 5.00 0.20 1.3 max note: pin 1 chamfer not shown. 2.20 0.15 2.54 0.15 4 3 1 2 1.00 0.20 (x4) 1.20 0.20 1.20 0.20 (x4) m n o p q 1.5 min 50 min 20.2 min 13.00.2 40 min r s t u v qty/reel 2.5 min 10 min 18.4 max 180 max 12.4+2-0 1,000 reel a b c d e f 16.00.3 7.50.1 6.750.1 4.00.1 2.00.1 f g h j k l 8.00.1 b0* 1.5 +0.1- 0.0 a0* 0.30 0.1 k0* tape line 1: e xx.xxx frequency in mhz (5 digits maximum + decimal) line 2: xx y zz week of year last digit of year ecliptek manufacturing identifier characteristic specification esd susceptibility mil-std-883, method 3015, class 1, hbm: 1500v fine leak test mil-std-883, method 1014, condition a flammability ul94-v0 gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-883, method 2002, condition b moisture resistance mil-std-883, method 1004 moisture sensitivity j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010, condition b vibration mil-std-883, method 2007, condition a
|