? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. smt broadband conical inductors document 334s-1 document 334s-1 revised 01/29/10 1. when ordering, please specify packaging code: bcs-802jl c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (bcs-122jl: 500 parts per full reel; bcs-531jl and bcs-802jl: 300 parts per full reel; bcs-652jl: 200 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. 2. inductance measured at 10 mhz, 0.1 vrms, 0 adc using an agilent/hp 16092a fixture in an agilent/hp 4291a impedance analyzer. 3. current that causes a 40c temperature rise from 25c ambient. 4. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. ? designed specifically for broadband and high frequency applications. ? operates as a series of narrow-band inductors throughout an operating frequency range of 10 mhz to 40 ghz. ? ideal for use in ultra-wideband bias t?s, where the conical inductor provides the path for the dc bias injection or extraction while isolating the power source from the active device. ? each surface mount inductor has a self positioning mounting bracket. ? for a ?flying lead? version that allows adjustment of the mounting angle consider the bcl series part inductance 2 dcr max i rms 3 number 1 5% (h) (ohms) (ma) bcs-531jl_ 0.53 0.15 830 bcs-122jl_ 1.20 1.05 200 bcs-652jl_ 6.5 0.70 510 bcs-802jl_ 8.0 3.39 150 for new designs, consider the bcr as an alternative. the bcr is electrically identical, and has a much more rugged package. it features a full length cover that completely protects the coil and four mounting pads for excellent board adhesion. we will continue to manufacture and support the bcs series indefinitely. terminations tin-silver-copper over silver-platinum-glass frit weights bcs-122: 19 mg; bcs-531: 71 mg; bcs-802: 77 mg; bcs-652: 329 mg ambient temperature ?40c to +85c storage temperature component: ?40c to +85c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging bcs-122l: 500/7 reel; 2000/13 reel plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 3.51 mm pocket depth bcs-531l: 300/7 reel; 1500/13 reel plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth bcs-652l: 200/7 reel; 750/13 reel plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 6.45 mm pocket depth bcs-802l: 300/7 reel; 1500/13 reel plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth pcb washing only pure water or alcohol recommended
? coilcraft, inc. 2010 smt broadband conical inductors specifications subject to change without notice. please check our website for latest information. document 334s-2 document 334s-2 revised 01/29/10 bcs-531, bcs-802 bcs-122 bcs-652 abcdef bcs-531 0.150 0.010/ 3,810,25 0.220 0.010 / 5,59 0,25 0.160 0.010 / 4,06 0,25 0.040 / 1,02 0.150 / 3,81 0.080 / 2,03 bcs-122 0.100 0.010 / 2,54 0,25 0.120 0.010 / 3,05 0,25 0.110 0.010 / 2,79 0,25 0.030 / 0,76 0.070 / 1,78 0.050 / 1,27 bcs-652 0.220 0.010 / 5,59 0,25 0.440 0.010 / 11,18 0,25 0.220 0.010 / 5,59 0,25 0.050 / 1,27 0.360 / 9,14 0.140 / 3,56 bcs-802 0.150 0.010 / 3,81 0,25 0.220 0.010 / 5,59 0,25 0.160 0.010 / 4,06 0,25 0.040 / 1,02 0.150 / 3,81 0.080 / 2,03 dimensions (inches / millimeters ) recommended land pattern d d d f a c b ed side view front view top view recommended land pattern d d d f a c b e d side view front view top view d d a c b d * ** recommended land pattern top view side view front view f e * pad is for mounting stability only. do not connect to circuit. 1 1 1 2 2 2 insertion loss response curves measured in a bias tee configuration with an agilent/hp 8722es network analyzer. return loss 0 0.5 1.0 1.5 2.0 2.5 0.05 10 20 30 40 frequency (ghz) s21 (db) -802 -652 -122 -531 0 10 20 30 40 50 0.05 10 20 30 40 frequency (ghz) s11 (db) -802 -652 -122 -531 port 1 1 2 port 2
|
