?2008 osaoptolightgmbh?tel.+49(0)3065762683? fax+49(0)3065762681?contact@osaopto.com preliminary 0,30 0,32 0,34 0,36 0,24 0,26 0,28 0,30 0,32 0,34 0,36 0,38 0,40 0,42 1 2 3 4 5 6 8000 k 7000 k 6000 k 5000 k 4500 k 7 y x 0,42 0,44 0,46 0,48 0,36 0,38 0,40 0,42 0,44 0,46 0,48 2 3000 k 2500 k y x 5 7 6 1 4 3 color coordinates classes white warm white osa opto light gmbh k?penicker str. 325 / haus 201 12555 berlin - germany tel. +49 (0)30 65 76 26 83 fax: +49 (0)30 65 76 26 81 e-mail: contact@osa-opto.com series 400 - ceramics thin film technology features - size 3,0(l) x 2,0(w) x 1,0(h) mm - circuit substrate: al2o3 ceramics - devices are rohs conform - lead free solderable, soldering pads: gold plate d - taped in 8 mm blister tape, cathode to transport ing perforation - all devices sorted into luminous intensity class es - taping: face-up (t) - high luminous intensity types - sorted in color-temperatur (cct) classes i f, max [ma] i f,p [ma] tp 100 s =1: 10 v r [v] i r, max [ a] thermal resistance r thja [k / w] t op [ c] t st [c] 30 100 5 100 60 -40...85 -40...100 -40 -20 0 20 40 60 80 100 0 10 20 30 t op [c] if [ma] maximal forward current (dc) characteristic electrostatic discharge classification (mil-std-883 e) class 1 type emitting marking measurement v f [v] i v [mcd] color at i f [ma] typ max color coordinates min typ ocl-400 ew ocl-400 eww white warm white anode anode 20 20 3,2 3,2 3,8 3,8 0,32/0,33 0,45/0,41 300 300 500 500 absolute maximum ratings electro-optical characteristics
preliminaryedition03/08 ?2008 osaoptolightgmbh?tel.+49(0)3065762683? fax+49(0)3065762681?contact@osaopto.com 0 30 60 90 120 150 180 0,0 0,2 0,4 0,6 0,8 1,0 0,0 0,2 0,4 0,6 0,8 1,0 view angle 1 10 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 ew and eww uf (v) if (ma) u f ? i f characteristic 0 10 20 30 1 2 ew and eww iv rel (at 20 ma ) if (ma) i f ? i v, rel characteristic
preliminaryedition03/08 ?2008 osaoptolightgmbh?tel.+49(0)3065762683? fax+49(0)3065762681?contact@osaopto.com 300 250 250 200 200 150 150 100 100 50 50 0 max. 40 s 10-20 s 230c time (sec) t e m p e r a t u r e ( c ) 300 ir reflow soldering profile ir reflow soldering profile for lead free soldering manual soldering: max power of iron 25w/ 3s/ 300c outline drawing recommended soldering patterns soldering conditions
preliminaryedition03/08 ?2008 osaoptolightgmbh?tel.+49(0)3065762683? fax+49(0)3065762681?contact@osaopto.com series color encapsulation packaging ocl-400 - ??????? - xd - t t - taped xd - uncolored diffused type definition, e.g. ocl-400 ew-xd-t (general information ? not this device specific) attention please: the led output is strong enough to injure human eye s. precautions must be taken to prevent locking directly at the led with unaided eyes for m ore than a few seconds. flashing lights have been known to cause discomfort in people, you can p revent this by taking precautions during use. also, people should be cautions when using equipmen t where these leds are incorporated. ordering code for parts c: 0.28 - 0.45 c1: 0.28 - 0.36 q1: 71 - 90 d: 0.45 - 0.71 c2: 0.36 - 0.45 q2: 90 - 112 e: 0.71 - 1.12 d1: 0.45 - 0.56 r1: 112 - 140 f: 1.12 - 1.80 d2: 0.56 - 0.71 r2: 140 - 180 g: 1.80 - 2.80 e1: 0.71 - 0.90 s1: 180 - 224 h: 2.80 - 4.50 e2: 0.90 - 1.12 s2: 224 - 280 j: 4.50 - 7.10 f1: 1.12 - 1.40 t1: 280 - 355 k: 7.10 - 11.20 f2: 1.40 - 1.80 t2: 355 - 450 l: 11.20 - 18.00 g1: 1.80 - 2.24 u1: 450 - 560 g2: 2.24 - 2.80 u2: 560 - 710 m: 18 - 28 h1: 2.80 - 3.55 v1: 710 - 900 n: 28 - 45 h2: 3.55 - 4.50 v2: 900 - 1120 p: 45 - 71 j1: 4.50 - 5.60 w1: 1120 - 1420 q: 71 - 112 j2: 5.60 - 7.10 w2: 1420 - 1800 r: 112 - 180 k1: 7.10 - 9.00 x1: 1800 - 2250 s: 180 - 280 k2: 9.00 - 11.20 x2: 2250 - 2800 t: 280 - 450 l1: 11.20 - 14.00 y1: 2800 - 3550 u: 450 - 710 l2: 14.00 - 18.00 y2: 3550 - 4500 v: 710 - 1120 m1: 18.00 - 22.40 z1: 4500 - 5750 w: 1120 - 1800 m2: 22.40 - 28.00 z2: 5750 - 7100 x: 1800 - 2800 n1: 28.00 - 35.50 y: 2800 - 4500 n2: 35.50 - 45.00 z: 4500 - 7100 p1: 45.00 - 56.00 p2: 56.00 - 71.00 led luminous intensity groups and subgroups [ mcd ] measured according to cie 127. all smd-leds are 100% m easured and selected on full automated equipment with an accuracy of 11 %. special service: brightness selection in subselectio ns possible. color selection in subselections possible (each sub group per reel ).
preliminaryedition03/08 ?2008 osaoptolightgmbh?tel.+49(0)3065762683? fax+49(0)3065762681?contact@osaopto.com packing : the reel is sealed in special plastic bag with inte grate esd protection ( mil - std 81705 ) including a silica dry-pack label order no. xxxxxxxxx customer order no. type ocl-400 ?????-??-t intensity group zz color class : cc color class - optional charge no. 1122-aaaaaa 11 week ? 22 year ? a internal identification quantity 9999 attention please: the information describes the type of component and shall not considered as assured characteristics. t erms of delivery and rights to change reserved. due to technical requirements components may contai n dangerous substances. the data sheet may changed without prior informatio n; the valid issue will be on our webpage in intern et. packaging: please use the recycling operators known to you. components used in life support devices or systems and safety systems must be expressly authorized for such purpose! d parts/reel 180 mm 330 mm 2000 8000 tape and reel packing
|