3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pleated foil i/o cable assemblies mdr version physical electrical environmental (connector) technical specification: see ts-0423 for .050 mini d-ribbon (mdr) (cable) construction: 0.025 pleated foil shielded, 30 awg (solid), tpe primary 50 ohm technical specifications: see ts-0285 for 90101 - gray pvc jacket see ts-0402 for 90201 - gray tpe cover see ts-0876 for 93101 - low skew, gray pvc jacket 75 ohm technical specifications: see ts-0451 for 90111 - gray pvc jacket see ts-0598 for 90211 - gray tpe cover (shells) overmolded: 68, 80 and 100 posi tions, thumbscrews glass reinforced polyester (pbt) - gray metal: see ts-0655 - 20, 26, 36 and 40 position, latching see ts-0396 - 50 position, latching see ts-0355 - 68 position, latching see ts-0666 - 68, 80 and 100 position, thumbscrew (jackscrews) material: steel plating: nickel on #4-40 zinc trivalent black on m2.5 voltage rating: 30 v impedance: see pleated foil cable (pfc) specifications temperature rating: 75 c maximum ts-0804-08 sheet 1 of 4 ? mates with standard 3m mdr boardmount headers ? pleated copper foil pr ovides a 360 degree shield overmolded assemblies ? available in 68, 80 and 100 positions ? molded-in strain relief ? can utilize either #4-40 or m2.5 thumbscrews ? supplied as a complete assembly only metal shell assemblies ? metal shells available in 20, 26, 36, 40, 50, 68, 80 and 100 positions ? offer quick release feature on 20 to 68 position for ease of installation ? 68, 80 and 100 positions available with thumbscrews ? rohs* compliant date modified: april 12, 2007 ul file no.: e86982 *"rohs compliant 2005/95/ec" means that the product or part ("product") do es not contain any of the s ubstances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an a pplication that is exempt under eu rohs. this info rmation represents 3m's knowledge and belief, which may be based in whole or in part o n information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3m?s re gulatory information appendix, then 3m?s entire liability and buy er?s exclusive remedy will be in accordance with the warranty stated below.
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pleated foil i/o cable assemblies mdr version overmolded shell w/ thumbscrews contact quantity dimension a dimension b dimension c dimension d 68 2.52 [ 64.0 ] 2.32 [ 58.9 ] 2.22 [ 56.4 ] 2.11 [ 53.6 ] 80 2.81 [ 71.4 ] 2.61 [ 66.3 ] 2.58 [ 65.5 ] 2.41 [ 61.2 ] 100 3.32 [ 84.3 ] 3.12 [ 79.2 ] 3.08 [ 78.2 ] 2.91 [ 73.9 ] assembly tolerances length and tolerance <36 : 1 36 to 120 : 2 120 to 240 : 4 >240 : 6 minimum length: 8 [203 mm ] ts-0804-08 sheet 2 of 4 .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [mm] inch pleated foil mdr plug cable jacket copper foil shield overmold resin overmold backshell version jackscrew option 4-40 unc or m2.5 .51 [ 13.0 ] .36 min [ 9.1 ] position 1 (last) position ?n? shim (optional) .250 [ 6.35 ] 2.05 max [ 52.1 ] 1.43 [ 36.3 ] 1.13 [ 28.7 ] .43 [ 10.9 ] .08 [ 2.0 ] 1.72 [ 43.7 ] a b c d position 2 .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [mm] inch
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pleated foil i/o cable assemblies mdr version metal shell with thumbscrews contact quantity dimension a 68 2.52 [ 64.0 ] 80 2.82 [ 71.6 ] 100 3.32 [ 84.3 ] assembly tolerances length and tolerance <36 : 1 36 to 120 : 2 120 to 240 : 4 >240 : 6 minimum length: 68-100 position: 8 [203 mm ] ts-0804-08 sheet 3 of 4 cable jacket metal backshell with thumbscrews version conductive gasket metal cable clamp metal shell pleated foil mdr plug .11 [ 2.8 ] dim a .52 [ 13.2 ] 1.73 [ 43.9 ] note: there are two connector terminations available for metal shell versions (see ordering information). 1. ms = standard connection for gsgsg, with signals on wires 2, 4, 6, (etc.) places all the grounds in the lower (circle) row of the connector and all the signals in the upper (triangle) row of the connector. 2. ls = low crosstalk connection for gsgsg, with signals on wires 2, 4, 6, (etc.) places a gsgsg pattern on both the lower (circ le) and upper (triangle) rows of the connector. 3. metal junction shells come with either 2 or 4 screws, see individual tech sheet for details.
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 50 ohm, pvc ja c k et , 9 0101 /x x 50 o h m, t p e c o v e r, 90 20 1 / xx 50 o hm , pv c ja c ke t l o w skew, 93 10 1/ x x 75 o hm, pvc jacke t , 90111/xx 75 ohm, t p e co v er, 90211/xx x xxxx over molded or metal backshell withthumbscrews 68 - 100 position metal backshell with latches 20 - 68 position x xx x xxxx 3m ? pleated foil i/o cable assemblies mdr version metal shell with latches contact quantity dimension b dimension c dimension d 20 1.17 [ 29.7 ] 1.55 [ 39.4 ] .42 [ 10.7 ] 26 1.31 [ 33.3 ] 1.50 [ 38.1 ] 36 1.57 [ 39.9 ] 40 1.67 [ 42.4 ] 50 1.93 [ 49.0 ] 1.35 [ 34.3 ] .46 [ 11.7 ] 68 2.37 [ 60.2 ] ts-0804-08 sheet 4 of 4 xx-xxxxxg-xxx -xx-xxx.x body type om=overmold ls=metal shell, low crosstalk connection ms=metal shell, standard connection cable impedance and jacket type 50 90101= thick jacket 90201= thin cover 93101= thick jacket, low skew 75 90111= thick jacket 90211= thin cover conductor/ contact quantity ( see table ) shim n=no shim (overmold only) s=shim (overmold only) 0=placeholder (metal shell only) jackscrew 4=4-40 thread m=m2.5 thread l=latch length in inches minimum lengths, 6" [152 mm] for 20 - 50 position cables, and 8" [203 mm] for 68 - 100 position cables ordering information .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [mm] inch assembly tolerances length and tolerance <36 : 1 36 to 120 : 2 120 to 240 : 4 >240 : 6 minimum length: 20-50 position: 6" [152 mm] 68-100 position: 8" [203 mm] metal backshell with latching version .08 [ 2.0 ] d b c
3 printed in usa. minimum 10% post-consumer fiber important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. 3m electronics 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/electronics ? all rights reserved. 3m 2007
|
