View LO3340-KN_3806915.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 3 mm (t1) led, non diffused 2003-09-03 1 besondere merkmale ? geh?usetyp: eingef ? rbtes, klares 3 mm (t1) geh ? use besonderheit des bauteils: l ? tspie ? e mit aufsetzebene wellenl ? nge: 628 nm (super-rot), 606 nm (orange), 587 nm (gelb), 570 nm (gr n), 560 nm (pure green) abstrahlwinkel: 50 technologie: gaalp (super-rot, orange, gelb, gr n), gap (pure green) optischer wirkungsgrad: 1,5 lm/w (super-rot, orange, gelb), 2,5 lm/w (gr n), 0,6 lm/w (pure green) gruppierungsparameter: lichtst ? rke l ? tmethode: wellenl ? ten (ttw) verpackung: sch ttgut, gegurtet lieferbar anwendungen optischer indikator hinterleuchtung (lcd, handy, schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) signal- und symbolleuchten markierungsbeleuchtung (z.b. stufen, fluchtwege, u. ? .) innenbeleuchtung im automobilbereich (z.b. instrumentenbeleuchtung, u. ? .) leuchtschriftanzeigen features package: colored, clear 3 mm (t1) package feature of the device: solder leads with stand-off wavelength: 628 nm (super-red), 606 nm (orange), 587 nm (yellow), 570 nm (green), 560 nm (pure green) viewing angle: 50 technology: gaalp (super-red, orange, yellow, green), gap (pure green) optical efficiency: 1.5 lm/w (super-red, orange, yellow), 2.5 lm/w (green), 0.6 lm/w (pure green) grouping parameter: luminous intensity soldering methods: ttw soldering packing: bulk, available taped on reel applications optical indicators backlighting (lcd, cellular phones, switches, keys, displays, illuminated advertising, general lighting) signal and symbol luminaire marker lights (e.g. steps, exit ways, etc.) interior automotive lighting (e.g. dashboard backlighting, etc.) light writing displays
2003-09-03 2 ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 anm.: die standardlieferform von serientypen beinhaltet eine untere bzw. eine obere familiengruppe oder mindestens zwei einzelgruppen. in einer verpackungseinheit / gurt ist immer nur eine helligkeitsgruppe enthalten. die technologiebedingte helligkeits-streuung der heutigen led-herstellprozesse ber einen l?ngeren fertigungszeitraum (halbleitermaterial - chipherstellung - montageprozess) erlaubt keine zusage einer einzelnen helligkeitsgruppe. daher mssen mindestens zwei helligkeitsgruppen vorgesehen werden! note: the standard shipping format for serial types includes a lower or upper family group or at least two individual groups. no packing unit / tape ever contains more than one luminous intensity group. luminosity variations caused by the technology used in current led manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign leds to a single luminous intensity group. for this reason at least two luminous intensity groups must be provided! typ type emissions- farbe color of emission geh ? use- farbe color of package lichtst ? rke luminous intensity i f = 10 ma i v (mcd) lichtstrom luminous flux i f = 10 ma v (mlm) bestellnummer ordering code ls 3340-kn ls 3340-l ls 3340-m ls 3340-lp super-red red clear 7.1 ? 45.0 11.2 ? 18.0 18.0 ? 28.0 11.2 ? 71.0 35 (typ.) 20 (typ.) 30 (typ.) 55 (typ.) q62703q1701 q62703q1702 q62703q1704 q62703q3223 lo 3340-kn lo 3340-l lo 3340-m lo 3340-n lo 3340-mp orange orange clear 7.1 ? 45.0 11.2 ? 18.0 18.0 ? 28.0 28.0 ? 45.0 18 ? 71.0 35 (typ.) 20 (typ.) 30 (typ.) 45 (typ.) 60 (typ.) q62703q1886 q62703q2256 q62703q2255 q62703q2473 q62703q2628 ly 3340-jm ly 3340-m ly 3340-n ly 3340-lp yellow yellow clear 4.5 ? 28.0 18.0 ? 28.0 28.0 ? 45.0 11.2 ? 71.0 20 (typ.) 30 (typ.) 45 (typ.) 55 (typ.) q62703q1789 q62703q1999 q62703q2652 q62703q1792 lg 3330-kn lg 3330-n lg 3330-p lg 3330-lp green colorless clear 7.1 ? 45.0 28.0 ? 45.0 45.0 ? 71.0 11.2 ? 71.0 35 (typ.) 45 (typ.) 70 (typ.) 55 (typ.) q62703q1698 q62703q2010 q62703q4873 q62703q2011 lp 3340-jl lp 3340-k lp 3340-km pure green green clear 4.5 ? 18.0 7.1 ? 11.2 7.1 ? 28.0 15 (typ.) 12 (typ.) 24 (typ.) q62703q2749 q62703q2982 q62703q3211
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit ls, lo, ly, lg lp betriebstemperatur operating temperature range t op ? 55 ? + 100 c lagertemperatur storage temperature range t stg ? 55 ? + 100 c sperrschichttemperatur junction temperature t j + 100 c durchlassstrom forward current i f 40 30 ma sto ? strom surge current t 10 s, d = 0.005 i fm 0.5 a sperrspannung 1) reverse voltage v r 12 v leistungsaufnahme power consumption t a 25 c p tot 130 95 mw w ? rmewiderstand 2) thermal resistance sperrschicht/umgebung junction/ambient sperrschicht/l ? tpad junction/soldering point montage auf pc-board fr 4 (padgr ?? e 16 mm 2 ) mounted on pc board fr 4 (pad size 16 mm 2 ) minimale beinchenl ? nge minimum lead length r th ja r th js 400 180 k/w k/w 1) f r kurzzeitigen betrieb geeignet / suitable for short term application 2) r th erh ? ht sich um 13 k/w pro mm beinchenl ? nge. each additional 1 mm of lead length increases r th by 13 k/w.
2003-09-03 4 ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol wert value einheit unit ls lo ly lg lp wellenl ? nge des emittierten lichtes (typ.) wavelength at peak emission i f = 10 ma peak 635 610 586 572 557 nm dominantwellenl ? nge 1) (typ.) dominant wavelength i f = 10 ma dom 628 606 587 570 560 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 10 ma ? 45 40 45 25 22 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 ? 50 50 50 50 50 grad deg. durchlassspannung 2) (typ.) forward voltage (max.) i f = 10 ma v f v f 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 v v sperrstrom (typ.) reverse current (max.) v r = 12 v i r i r 0.01 10 0.01 10 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 10 ma; ? 10 c t 100 c tc peak 0.11 0.12 0.10 0.11 0.11 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 10 ma; ? 10 c t 100 c tc dom 0.07 0.07 0.07 0.07 0.05 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 10 ma; ? 10 c t 100 c tc v ? 1.9 ? 1.9 ? 1.9 ? 1.4 ? 2.1 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 10 ma opt 1.5 1.5 1.5 2.5 0.6 lm/w 1) wellenl ? ngen werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) spannungswerte werden mit einer stromeinpr ? gedauer von 1 ms und einer genauigkeit von ?,1 v ermittelt. voltages are tested at a current pulse duration of 1 ms and a tolerance of ?.1 v.
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 5 helligkeitswerte werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 11 % ermittelt. luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. helligkeits-gruppierungsschema luminous intensity groups lichtgruppe luminous intensity group lichtst ? rke luminous intensity i v (mcd) lichtstrom luminous flux v (mlm) j k l m n p 4.50 ? 7.10 7.10 ? 11.20 11.20 ? 18.00 18.00 ? 28.00 28.00 ? 45.00 45.00 ? 71.00 8 (typ.) 12 (typ.) 20 (typ.) 30 (typ.) 45 (typ.) 78 (typ.)
2003-09-03 6 ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 relative spektrale emission i rel = f ( ), t a = 25 c, i f = 10 ma relative spectral emission v( ) = spektrale augenempfindlichkeit standard eye response curve abstrahlcharakteristik i rel = f ( ? ) radiation characteristic % rel ohl01697 100 80 60 40 20 0 400 450 500 550 600 650 700 nm i pure-green green yellow orange super-red v 0.8 100? 1.0 80? 90? 70? 0.4 0.6 0? 0 0.2 0.4 60? 50? 40? 30? 20? 0.6 0.8 10? 1.0 ? 0? 100? 20? 40? 80? 60? 120? ohl01646
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 7 durchlassstrom i f = f ( v f ) forward current t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current ls, lo, ly, lg relative lichtst ? rke i v / i v(10 ma) = f ( i f ) relative luminous intensity t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current lp 10 -1 v pure-green 5 super-red orange/yellow green ohl02145 i f f v 0 10 1 10 2 10 5 ma 1.0 1.4 1.8 2.2 2.6 3.0 3.4 0 ohl00538 f ? c t 0 20 40 60 80 100 ma 10 20 30 40 50 temp. solder point temp. ambient t a t s t s a t v v (10 ma) 10 -1 0 10 10 12 10 ma red yellow green super-red orange pure-green 10 -3 5 ohl02146 f 5 -2 10 5 -1 10 0 10 1 10 55 0 ohl00984 i f ? c t 0 20 40 60 80 100 10 20 30 40 ma temp. solder point temp. ambient t a t s t s a t
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 8 relative lichtst ? rke i v / i v(25 c) = f ( t a ) relative luminous intensity i f = 10 ma zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c ls, lo, ly, lg zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c lp yellow green orange super-red pure-green 0.0 ohl02150 ? c a 0 20 40 60 80 100 v v i i 0.4 0.8 1.2 1.6 2.0 (25 ? c) t ohl01162 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.1 0.2 0.5 dc 10 1 5 i f t 2 10 3 10 4 10 5 ma p ohl01686 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.2 0.5 dc 10 1 5 i f t 2 10 0.1 p 10 3 ma
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 9 ma ? zeichnung package outlines ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). kathodenkennung: k ? rzerer l ? tspie cathode mark: short solder lead gewicht / approx. weight: 0.15 g gexy6951 3.1 (0.122) 3.4 (0.134) 0.4 (0.016) 0.6 (0.024) 2.9 (0.114) 2.7 (0.106) 0.4 (0.016) 4.8 (0.189) 4.4 (0.173) area not flat 0.4 (0.016) 0.6 (0.024) 0.7 (0.028) 0.8 (0.031) 0.4 (0.016) 2.54 (0.100) spacing 27.0 (1.063) 1.2 (0.047) 1.8 (0.071) 29.0 (1.142) cathode 1.1 (0.043) 0.9 (0.035) 3.7 (0.146) 3.5 (0.138) 5.7 (0.224) 6.1 (0.240)
2003-09-03 10 ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 l ? tbedingungen soldering conditions wellenl ? ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) empfohlenes l ? tpaddesign wellenl ? ten (ttw) recommended solder pad ttw soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangsk ? hlung forced cooling normalkurve standard curve grenzkurven limit curves 4 (0.157) ohlpy985 4.8 (1.890)
ls 3340, lo 3340, ly 3340, lg 3330, lp 3340 2003-09-03 11 published by osram opto semiconductors gmbh wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. all typical data and graphs are basing on representative samples, but don t represent the production range. if requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. revision history: 2003-09-03 date of change previous version: 2002-09-18 page subjects (major changes since last revision) 3 thermal resistance (footnote) 4 dominant wavelength (orange) 10 annotations 2002-07-23 5 luminous intensity groups 2002-07-30 3, 4 value (reverse voltage from 5 v to 12 v) 2002-09-18 2 low yield groups deleted 2003-09-03

▲Up To Search▲

Price & Availability of LO3340-KN

	To Download LO3340-KN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .