sto150s3 tcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-10-31 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 3 / 4 typical applications features sdh/sonet meets stratum iii overall stability atm mechanical control (internal trimmer) wll efc optional measurement equipment very low aging standard surface mount package frequency range 10mhz ? 80mhz standard frequencies 10; 19.44; 38.88mhz frequency stabilities parameter frequency stability operating temp range vs. operating temperature range < 0.8 ppm -20 ... +70c parameter value condition initial tolerance vs. supply voltage change vs. load change vs. aging / 15 years < 1.0 ppm < 0.1 ppm < 0.1 ppm < 2.5 ppm @ 25 c v s 5% load 10% overall tolerance 15 years < 4.6 ppm frequency tuning parameter option i value condition mechanical (no efc) blank > 5.0 ppm (internal trimmer) electrical freq. control (efc) > 5.0 ppm note 1 voltage range (vc) u 0.5 to 4.5 v @ v s =5.0 v 0.3 to 3.0 v @ vs=3.3 v pulling slope positive freq. control input impedance >10 k w rf output parameter value condition signal hcmos load 15pf 10% duty cycle 40/60% @ vs/2 supply voltage parameter code i value condition supply voltage (v s ) 05 5.0 v 5% current consumption < 50 ma supply voltage (v s ) 33 3.3 v 5% current consumption < 50 ma additional parameters parameter value condition phase noise <- 95 dbc/hz 10 hz note 2 <-130 dbc/hz 100 hz <-140 dbc/hz 1 khz <-150 dbc/hz 10 khz <-150 dbc/hz 100 khz
sto150s3 tcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-10-31 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 4 / 4 additional parameters parameter value condition weight < 5 g operable temperature range -30 ... +80c storage temperature range -55 ... +105c processing & packing handling&processing note enclosure type g182a drawing 10 7,62 0,1 h 13 19,9 1 2 4 3 18,5max. 19,1 1,27 0,8 1,27 0,1 0,1 0,1 0,2 0,1 0,1 0,1 pin 1 identification 3 6,7 option g182 h = 8,3 ; g182 a all units in mm pin connections pin 1 n.c. mechanical freq. control pin 1 control voltage (vc) option u electrical and mech. freq. control pin 2 gnd, case pin 3 rf output pin 4 supply voltage (v s ) ordering code option i code i model frequency tuning supply voltage frequency example: sto150s3 u 05 10m00000 order: sto150s3 notes 1 others available 2 typical values @ 10.00 mhz unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) subject to technical modification; not all options are available at all frequencies
|