dimensions are shown in mm (inch) dimensions subject to change 158 d subminiature military/high reliability 40 a high power straight pcb (sizes de-dc) part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demmv5h1pn demmz5h1pn demmn5h1pn da 7w2 dammv7h2pn dammz7h2pn dammn7h2pn da 11w1 dammv11h1pn dammz11h1pn dammn11h1pn da 3w3 dammv3h3pn dammz3h3pn dammn3h3pn da 3wk3 DAMMV3HK3PNTM dammz3hk3pntm dammn3hk3pntm db 5w5 dbmmv5h5pn dbmmz5h5pn dbmmn5h5pn db 9w4 dbmmv9h4pn dbmmz9h4pn dbmmn9h4pn db 13w3 dbmmv13h3pn dbmmz13h3pn dbmmn13h3pn db 17w2 dbmmv17h2pn dbmmz17h2pn dbmmn17h2pn db 21w1 dbmmv21h1pn dbmmz21h1pn dbmmn21h1pn dc 8w8 dcmmv8h8pn dcmmz8h8pn dcmmn8h8pn dc 13w6 dcmmv13h6pn dcmmz13h6pn dcmmn13h6pn dc 17w5 dcmmv17h5pn dcmmz17h5pn dcmmn17h5pn dc 21wa4 dcmmv21ha4pn dcmmz21ha4pn dcmmn21ha4pn dc 25w3 dcmmv25h3pn dcmmz25h3pn dcmmn25h3pn dc 27w2 dcmmv27h2pn dcmmz27h2pn dcmmn27h2pn notes: for dd shell sizes, see page 160. keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) plug engaging face screw lock, boardlock and high power contact removed for clarity a c b e d 10 screw lock #4-40 unc 4,65 (.183) 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 3,18 (.125) 0,76 (.030) 4,52 (.178) 2,92 (.115) boardlock standoff #4-40 unc w f 2,84 (.112) l reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 254-255. for panel cutouts, see page 221. for hardware views (standard), see page 226.
|
