spec no: dsab8381 rev no: v.6 date: mar/14/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1201000540 package dimensions 5.0x6.0mm surface mount led lamp features single color. suitable for all smt assembly and solder process. available on tape and reel. ideal for backlighting. package : 500pcs / reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subject to change without notice. description this devices are made with ts ingaaip. aa5060syc/h super brig ht yellow
spec no: dsab8381 rev no: v.6 date: mar/14/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1201000540 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 50ma viewing angle min. typ. 2 ? 1/2 aa5060syc/h super bright yellow (ingaaip) water clear 380 700 100 symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 589 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 45 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.3 2.8 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 140 mw dc forward current 50 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsab8381 rev no: v.6 date: mar/14/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1201000540 super bright yellow aa5060syc/h
spec no: dsab8381 rev no: v.6 date: mar/14/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1201000540 recommended soldering pattern (units : mm ) tape specifications (units : mm ) aa5060syc/h if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|