1 of 10 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . bifet hbt ldmos package gnd 32 31 30 29 28 27 26 25 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 9 10 11 12 13 14 15 16 90 0 n/c gnd lo in gnd n/c n/c n/c v loa 1 v loa 2v mpa n/c gnd rf out gnd n/c vc3 n/c gnd i n/c n/c gnd q n/c vc4 n/c v lpa 1,2 vc1 n/c n/c n/c vc2 RFUV1003 12ghz to 16ghz gaas mmic iq upconverter rfmd's RFUV1003 is a 12ghz to 16ghz gaas phemt upconverter, incorporating an integrated lo buffer amplifier, a bala nced single side band (image rejection) mixer followed by variable gain amplifier, dc decoupling capacitors. the combina- tion of high performance part and low cost packaging makes the RFUV1003 a cost effective solution, ideally suited to both current and next generation point-to-point and vsat applications. RFUV1003 is packaged in a 5mm x 5mm qfn to simplify both system level board design and volume assembly. ordering information RFUV1003s2 2-piece sample bag RFUV1003sb 5-piece bag RFUV1003sq 25-piece bag RFUV1003sr 100 pieces on 7? reel RFUV1003tr7 750 pieces on 7? reel RFUV1003tr13 2500 pieces on 13? reel RFUV1003pck-410 evaluation board with 2-piece sample bag features ? rf frequency: 12ghz to16ghz ? lo frequency: 8ghz to 20ghz ? if frequency: dc to 4ghz ? conversion gain (max): 23db ? conversion gain (min): -10db ? nf (max. gain): 11db ? nf (min. gain): 17db ? oip3 (max. gain): +28dbm ? oip3 (min. gain): +12dbm ? image rejection: 20dbc applications ? point to point ? vsat ds111013 ? package: qfn, 32-pin, 5mm x 5mm x 0.95mm RFUV1003 www.datasheet.co.kr datasheet pdf - http://www..net/
2 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . absolute maximum ratings parameter rating unit lpa drain voltage vd 6 v loa drain voltage 6 v rf input power 15 dbm lo input power 15 dbm t oper -40 to +85 ? c t stor -65 to +150 ? c esd human body model class 1a parameter specification unit condition min. typ. max. rf frequency 12 16 ghz lo frequency 8 20 ghz if frequency dc 4 ghz lo input drive 0 dbm conversion gain (max.) 20 23 db conversion gain (min.) -10 db nf (max. gain) 11 db nf (min. gain) 17 db oip3 (max. gain) 25 28 dbm oip3 (min. gain) 9 12 dbm image rejection 15 20 dbc lo leakage at rf-port (maximum gain) -5 5 dbm with iq bias lo return loss 10 db rf return loss 10 db v d 5v i d 380 500 ma vva -3 0 v caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. ex tended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. rfmd green: rohs compliant per eu directive 2002/95/ec, halogen free per iec 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a fl ame retardant, and <2% antimony in solder. www.datasheet.co.kr datasheet pdf - http://www..net/
3 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . typical electrical performance measurements performed with i and q (if) ports connected to an external 90 hybrid, lo power= 0dbm and if =2.5ghz, -10dbm, unless otherwise stated. 0 5 10 15 20 25 30 9 1011121314151617 max. conversion gain (db) rf frequency (ghz) max. conversion gain vs. rf frequency over temperature (usb) 25 c 85 c -40 c vc1=vc2=vc3=vc4=-3v vlpa1,2=vmpa=5v vloa1=vloa2=5v -30 -25 -20 -15 -10 -5 0 9 1011121314151617 min. conversion gain (db) rf frequency (ghz) min. conversion gain vs. rf frequency over temperature (usb) 25 c 85 c -40 c vc1=vc4=-1v vc2=-0.5 vc3=0v vlpa1,2=vmpa=5v vloa1=vloa2=5v 0 10 20 30 40 50 60 9 1011121314151617 image rejecon (dbc) rf frequency (ghz) image rejecon vs. rf frequency over temperature (usb) 25 c 85 c -40 c vc1=vc2=vc3=vc4=-3v vlpa1,2=vmpa=5v vloa1=vloa2=5v www.datasheet.co.kr datasheet pdf - http://www..net/
4 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . typical electrical performance measurements performed with i and q (if) ports connected to an external 90 hybrid, lo power= 0dbm and if =2.5ghz, -10dbm, unless otherwise stated. 8 9 10 11 12 13 14 15 16 17 13 13.5 14 14.5 15 15.5 noise figure (db) rf frequency (ghz) noise figure vs. rf frequency at 20db conversion gain over temperature (usb) 25 c 85 c -40 c 8 9 10 11 12 13 14 15 16 17 13 13.5 14 14.5 15 15.5 noise figure (db) rf frequency (ghz) noise figure vs. rf frequency at -5db conversion gain over temperature (usb) 25 c 85 c -40 c 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at 25c (usb 15ghz band) 15.5ghz 15ghz 14.5ghz 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at 25c (usb 13ghz band) 13.5ghz 13ghz 12.5ghz www.datasheet.co.kr datasheet pdf - http://www..net/
5 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . typical electrical performance measurements performed with i and q (if) ports connected to an external 90 hybrid, lo power= 0dbm and if =2.5ghz, -10dbm, unless otherwise stated. 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at -40c (usb 15ghz band) 15.5ghz 15ghz 14.5ghz 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at -40c (usb 13ghz band) 13.5ghz 13ghz 12.5ghz 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at 85c (usb 15ghz band) 15.5ghz 15ghz 14.5ghz 0 5 10 15 20 25 30 35 -10 -5 0 5 10 15 20 25 oip3 (dbm) conversion gain (db) oip3 vs. conversion gain at 85c (usb 13ghz band) 13.5ghz 13ghz 12.5ghz www.datasheet.co.kr datasheet pdf - http://www..net/
6 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . typical electrical performance measurements performed with i and q (if) ports connected to an external 90 hybrid, lo power= 0dbm and if =2.5ghz, -10dbm, unless otherwise stated. -20 -15 -10 -5 0 5 10 7 8 9 10 11 12 13 14 lo leakage at rf port (dbm) lo frequency (ghz) lo leakage vs. lo frequency over temperature (usb 15ghz band) 25 c 85 c -40 c i bias = +4mv q bias = -8mv -20 -15 -10 -5 0 5 10 7 8 9 10 11 12 13 14 lo leakage at rf port (dbm) lo frequency (ghz) lo leakage vs. lo frequency over temperature (usb 13ghz band) 25 c 85 c -40 c i bias = +15mv q bias = -10mv -30 -25 -20 -15 -10 -5 0 6 8 10 12 14 16 18 20 rf return loss (db) rf frequency (ghz) rf return loss vs. rf frequency -30 -25 -20 -15 -10 -5 0 6 8 10 12 14 16 18 20 lo return loss (db) lo frequency (ghz) lo return loss vs. lo frequency www.datasheet.co.kr datasheet pdf - http://www..net/
7 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . bias sequence and gain control optimum performance is achieved using sequential bias. at maximum gain (v c 1 ,v c 4), v c 2 and v c 3 are set at -3v. (v c 1 ,v c 4), v c 2 and v c 3 are biased in sequence. the first dynamic range is achieved by setting v c 2 and v c 3 at -3v and varying (v c 1 ,v c 4) over the (-3v to -1v) range as shown in the table belo w. similarly second dynamic range is achieved by setting (v c 1 ,v c 4) at -1v, v c 3 at -3v and varying v c 2 over the (-3v to -0.5v) range. finally third dynamic range is achieved by setting (v c 1 ,v c 4) at -1v, v c 2 at -0.5v and varying v c 3 over the (-3v to 0v) range. package outline drawing qfn, 32-pin, 5mm x 5mm x 0.95mm bias sequence 1 (typical) gmax gmin vc1, vc4-3-2.5-2-1.5-1-1-1-1-1-1-1-1-1-1-1 vc2 -3 -3 -3 -3 -3 -2.5 -2 -1.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 vc3 -3-3-3-3-3-3-3-3-3-2.5-2-1.5-1-0.50 5.0000.150 3.5000.100 4.4000.100 0.3200.100 0.3000.100 0.500.050 0.130 3.5000.100 4.4000.100 5.0000.150 0.9500.100 www.datasheet.co.kr datasheet pdf - http://www..net/
8 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . pin names and description pin function description 1n/c 2gnd ground 3lo local oscillator input. ac coupled and matched to 50 ? 4gnd ground 5n/c 6n/c 7n/c 8vloa1 loa stage1 drain bias 9vloa2 loa stage2 drain bias 10 vmpa mpa drain bias 11 n/c 12 gnd ground 13 rfout rf output. ac coupled and matched to 50w 14 gnd ground 15 n/c 16 vc3 control line number3 (see bias sequence description) 17 vc2 control line number2 (see bias sequence description) 18 n/c 19 n/c 20 n/c 21 vc1 control line number1 (see bias sequence description) 22 vlpa1, vlpa2 lpa stage1,2 drain bias 23 n/c 24 vc4 control line number4 (see bias sequence description) 25 n/c 26 q if q input 27 gnd ground 28 n/c 29 n/c 30 i if i input 31 gnd ground 32 n/c www.datasheet.co.kr datasheet pdf - http://www..net/
9 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . application circuit block diagram package gnd 32 31 30 29 28 27 26 25 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 9 10 11 12 13 14 15 16 90 0 if in 200pf q bias 200pf ibias 100 nh 100 nh lo in v loa 1 100pf 100nf 1uf rf out 100pf 100nf 1uf 100pf 100nf 1uf 100pf 100nf 1uf v loa 2 v mpa vc3 100pf 100nf 1uf 100pf 100nf 1uf 100pf 100nf 1uf 100pf 100nf 1uf vc4 v lpa 1,2 vc1 vc2 note: external hybrid coupler is required note: external components for iq biases are required www.datasheet.co.kr datasheet pdf - http://www..net/
10 of 10 RFUV1003 ds111013 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board layout test condition sub-band frequency ranges lo power 0dbm band frequency range if power -10dbm 10ghz 10ghz to 10.5ghz vloa1, vloa2 5v 11ghz 10.7ghz to 11.7ghz vlpa1, vlpa2, vmpa 5v 13ghz 12.75ghz to 13.25ghz (v c 1, v c 4), v c 2, v c 3 -3v to 0v 15ghz 14.4ghz to 15.4ghz vlpa1 vlpa1 vc1 vc2 vc3 rfout vloa1 vloa2 vmpa loin if1 (i) if2 (q) 100pf (0402) 100nf (0402) 1uf (0402) vc4 vlpa1,2 www.datasheet.co.kr datasheet pdf - http://www..net/
|
