jt-v specifications typical applications ?oven ?heating & ventilation ?home appliance surge voltage 6,000 v 30 amp. relay jt-v relays pcb type 20.2 0.6 .795 .024 26.9 0.6 1.059 .024 31.9 0.6 1.256 .024 tmp type 27.9 0.6 1.096 .024 27.4 0.6 1.079 .024 32.2 0.6 1.268 .024 rohs directive compatibility information http://www.nais-e.com/ features surge withstand voltage: 6,000 v high switching capacity ?30 a for 1 form a ? contact arrangements ?1 form a or 1 form c ?mp types available ul/c-ul recognized class f types standard contacts * the life is for open venting-hole condition. coil at 20 c 68 f characteristics #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 measurement at same location as ?nitial breakdown voltage section * 2 detection current: 10 ma * 3 ware is standard shock voltage of 1.2 50 s according to jec-212-1981. * 4 excluding contact bounce time * 5 half-wave pulse of sine wave: 11ms; detection time: 10 s * 6 half-wave pulse of sine wave: 6ms * 7 detection time: 10 s * 8 refer to 6. conditions for operation, transport and storage mentioned in ambient envi r onment pcb & tmp type arrangement 1 form a 1 form c initial contact resistance, max. (by voltage drop method, 6 v dc 1 a) 50 m ? contact material agsno 2 type rating max. switching power 8310 va n.c.: 2770 va n.o.: 5540 va max. switching voltage 277 v ac max. switching current 30 a n.c.: 10 a n.o.: 20 a min. switching capacity #1 (reference value) 100 ma, 5 v dc expected life mechanical min. 1 10 7 electrical (resistive load) 20 a 277 v ac min. 1 10 5 * n.o.: 20 a 277 v ac min. 1 10 5 * n.c.: 10 a 277 v ac min. 1 10 5 * pcb & tmp type nominal operating power approx. 1,000 mw pcb & tmp type initial insulation resistance* 1 min. 100 m ? at 500 v dc initial breakdown voltage* 2 between contacts 1,200 vrms between contacts and coil 3,500 vrms initial surge voltage between contact and coil 6,000 v* 3 operate time* 4 (at nominal voltage) max. 15 ms release time (without diode)* 4 (at nominal voltage) max. 10 ms shock resistance functional* 5 98 m/s 2 {10 g} destructive* 6 980 m/s 2 {100 g} vibration resistance functional* 7 10 to 55 hz at double amplitude of 1.5 mm destructive 10 to 55 hz at double amplitude of 2 mm conditions for operation, transport and storage* 8 (not freezing and condensing at low temperature) ambient temp. ?5 c to +85 c ?7 f to +185 f humidity 5 to 85% r.h. unit weight pcb type: approx. 25 g (.88 oz) tmp type: approx. 30 g (1.06 oz) all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
jt-v ordering information jt-v relays (pcb and tmp type) coil data (at 20 c 68 f ) dimensions mm inch nominal v oltage, v dc pick-up voltage, v dc (max.) (initial) drop-out voltage, v dc (min.) (initial) coil resistance, ? ( 10%) nominal operating power, mw max. allowable voltage, v dc (at 70 c 158 f ) pcb & tmp pcb & tmp 12 9.0 1.2 144 1000 14.4 18 13.5 1.8 324 21.6 24 18.0 2.4 576 28.8 48 36.0 4.8 2304 57.6 contact arrangement 1a: 1: 1 form a 1 form c s: g: sealed type dust cover type protective construction mounting classification pa: tmp: pcb type tmp type coil voltage dc 12, 18, 24, 48 v tmps1ajtv 12v notes: 1. ul/c-ul approved type is standard. 2. 5 v, 6 v, 9 v dc types are also available. please contact us for details. 3. standard packing: pcb type: carton: 50 pcs. case: 500 pcs. tmp type: carton: 50 pcs. case: 300 pcs. 2-0.8 1.6 terminals 1.14 1.14 terminal 2-0.6 dia. coil terminals 20.2 0.6 26.9 0.6 3.6 0.5 31.9 0.6 1 form c 7.62 15.24 2.54 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. 3-2.1 dia. 3-.083 dia. pc board pattern (bottom view) schematic (bottom view) 0.8 1.6 terminals 1.14 1.14 terminal 2-0.6 dia. coil terminals 20.2 0.6 26.9 0.6 3.6 0.5 31.9 0.6 1 form a 15.24 2.54 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. 2-2.1 dia. 2-.083 dia. pc board pattern (bottom view) schematic (bottom view) 1. pcb type tolerance: 0.1 .004 2-.031 .063 .045 .045 2-.024 dia. .795 .0241.059 .024 .142 .020 1.256 .024 .300 .600 .100 .700 .550 .150 .600 .100 .700 .550 .150 .031 .063 .045 .045 2-.024 dia. .795 .0241.059 .024 .142 .020 1.256 .024 com nc no com no nc 2-0.8 1.6 terminals 27.9 0.6 27.4 0.6 6.35 0.1 3.6 0.5 32.2 0.6 1 form c 7.62 15.24 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. pc board pattern (bottom view) schematic 0.8 0.1 0.8 0.1 2-0.6 dia. coil terminals 1.14 1.14 terminal n.c. n.o. com (top view) (bottom view) 6.20 0.5 10.93 0.5 3-2.1 dia. 3-.083 dia. 0.8 1.6 terminals 27.9 0.6 27.4 0.6 6.35 0.1 3.6 0.5 32.2 0.6 1 form a 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. pc board pattern (bottom view) 2. tmp type schematic 0.8 0.1 2-0.6 dia. coil terminals 1.14 1.14 terminal n.o. com (top view) (bottom view) 6.20 0.5 10.93 0.5 2-2.1 dia. 2-.083 dia. 2.54 15.24 tolerance: 0.1 .004 2-.031 .063 2-.024 dia. .045 .045 1.096 .024 1.079 .024 .142 .020 1.268 .024 .031 .004 .031 .004 .250 .004 2.54 .300 .600 .700 .550 .150 .244 .020 .430 .020 .100 .031 .063 2-.024 dia. .045 .045 1.096 .024 1.079 .024 .142 .020 1.268 .024 .031 .004 .250 .004 .700 .550 .150 .244 .020 .430 .020 .100 .600 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
jt-v reference data for cautions f or us e , see rel a y t e c hnical in f ormation 1. change of rate of pick-up and drop-out voltage (at 20 c 68 f ) sample: jtv1s-tmp-24v (6 pcs.) 2. distribution frequency of pick-up voltage (at 20 c 68 f ) sample: jtv1s-tmp-12v (100 pcs.) 3. distribution frequency of drop-out voltage (at 20 c 68 f ) sample: jtv1s-tmp-12v (100 pcs.) drop-out voltage pick-up voltage 25 40 30 20 10 ?0 ?0 ?0 ?0 45 65 85 105 ?5 ?5 ?5 5 +77 ?7 ?1 +5 +41 +113+149+185 +221 rate of change, % ambient temperature, c f 5.9 6.1 6.3 6.5 6.7 6.9 7.0 0 10 20 30 40 distribution frequency pick-up voltage, v distribution frequency drop-out voltage, v 0 10 20 30 40 2.7 2.9 3.1 3.3 3.5 3.7 3.8 4.-(1) coil temperature rise (tmp type)* ambient temperature: 25 c 77 f sample: jtv1as-tmp-12v (6 pcs.) * coil temperature rise of sealed types are same as data of the dust cover type. ambient temperature: 85 c 185 f sample: jtv1as-tmp-12v (6 pcs.) temperature rise, c coil applied voltage,%v 090 100 120 140 0 20 40 60 80 20 a 10 a temperature rise, c coil applied voltage,%v 090 100 120 140 0 20 40 60 80 20 a 10 a all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
|
