specification DR-30-5 DR-30-12 DR-30-15 DR-30-24 model dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range frequency range efficiency (typ.) ac current (typ.) input inrush current (typ.) safety standards harmonic current ems immunity working humidity working temp. storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload over voltage 5v 12v 15v 24v 3a 2a 2a 1.5a 0 ~ 3a 0 ~ 2a 0 ~ 2a 0 ~ 1.5a 15w 24w 30w 36w 80mvp-p 120mvp-p 120mvp-p 13.5 ~ 16.5v 150mvp-p 21.6 ~ 26.4v 2.0% 1.0% 1.0% 1.0% 10.8 ~ 13.2v 4.75 ~ 5.5v 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 100ms, 30ms/230vac 100ms, 30ms/115vac at full load 100ms/230vac 21ms/115vac at full load 85 ~ 264vac 120 ~ 370vdc 47 ~ 63hz 74% 81% 82% 83% 0.88a/115vac 0.48a/230vac cold start 15a/115vac 30a/230vac 105 ~ 160% rated output power protection type : constant current limiting, recovers automatica lly after fault condition is removed 5.75 ~ 6.75v protection type : shut down o/p voltage, re-power on to recover 13.8 ~ 16.2v 17.25 ~ 20.25v 27.6 ~ 32.4v -20 ~ +60 (refer to output load derating curve) 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.03%/ (0 ~ 50 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes; moun ting: compliance to iec60068-2-6 441.5k hrs min. mil-hdbk-217f (25 ) 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. file name:DR-30-spec 2008-04-07 ul60950-1, tuv en60950-1 a en50178 pproved, design refer to compliance to en55011,en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en61000-4-2, 3, 4, 5, 6, 8, 11, env50204, en55024, en61000- 6-2, en61204-3, heavy industry level, criteria a 30w single output industrial din rail power supply d r - 3 0 s e r i e s ripple & noise (max.) note.2 voltage tolerance note.3 environment protection safety & emc (note 4) withstand voltage isolation resistance i/p-o/p:3kvac i/p-o/p:100m ohms/500vdc emi conduction & radiation universal ac input/full range protections: short circuit / overload / over voltage cooling by free air convection can be installed on din rail ts-35/7.5 or 15 isolation class led indicator for power on 100% full load burn-in test 3 years warranty features : 78*93*56mm (w*h*d) 0.27kg; 48pcs/14kg/1.02cuft
block diagram mechanical specification file name:DR-30-spec 2008-04-07 -20 0 10 20 30 40 50 60 70 (vertical) 20 40 60 80 100 ambient temperature ( ) load (%) terminal pin no. assignment pin no. pin no. 2 1 5,6 3,4 78 assignment assignment +v ac/n ac/l -v led +v adj. admissible din-rail:ts35/7.5 or ts35/15 93 6 5 5 5 5 53 42 37.75 1 78 12.2 7 8 45 68 46.5 27.4 3 47 56 46.5 circuit detection o.l.p. emi filter rectifiers & filter power switch- filter & rectifiers +v -v i/p ing control o.v.p. output derating vs input voltage input voltage (vac) 60hz 85 100 95 120 115 160 140 200 180 240 220 264 load (%) ta=25 90 100 80 70 60 50 40 35 case no. 918b unit:mm 30w single output industrial din rail power supply d r - 3 0 s e r i e s derating curve
|
