specification model RS-25-3.3 RS-25-5 RS-25-12 RS-25-15 RS-25-24 RS-25- 48 dc voltage rated current current range rated power output voltage adj. range line regulation note.4 load regulation note.5 setup, rise time hold up time (typ.) voltage range frequency range efficiency(typ.) ac current (typ.) input inrush current (typ.) leakage current safety standards harmonic current ems immunity working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload over voltage 3.3v 5v 12v 15v 24v 48v 6a 5a 2.1a 1.7a 1.1a 0.57a 0 ~ 6a 0 ~ 5a 0 ~ 2.1a 0 ~ 1.7a 0 ~ 1.1a 0 ~ 0.57a 19.8w 25w 25.2w 25.5w 26.4w 27.36w 80mvp-p 80mvp-p 120mvp-p 120mvp-p 120mvp-p 200mvp-p 2.85 ~ 3.6v 4.75 ~ 5.5v 10.8 ~ 13.2v 13.5 ~ 16.5v 22 ~ 27.6v 42 ~ 54v 3.0% 2.0% 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% 1800ms, 23ms/230vac 4000ms, 30ms/115vac at full load 80ms/230vac 14ms/115vac at full load 88 ~ 264vac 125 ~ 373vdc (withstand 300vac surge for 5sec. without damage) 47 ~ 63hz 73.5% 3.8 ~ 4.45v 5.75 ~ 6.75v 13.8 ~ 16.2v 17.25 ~ 20.25v 27.6 ~ 32.4v 55.2 ~ 64.8v 78.5% 81.5% 83.5% 86% 85% 0.7a/115vac 0.4a/230vac cold start 30a/230vac <2ma / 240vac 110 ~ 180% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed ul60950-1, tuv en60950-1 approved compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 -20 ~ +70 (refer to output load derating curve) 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.03%/ (0 ~ 50 ) 10 ~ 500hz, 5g 10min./1cycle, period for 60min. each along x, y, z axes 309.7khrs min. mil-hdbk-217f (25 ) 78*51*28mm (l*w*h) file name:RS-25-spec 2010-10-18 protection type : shut off o/p voltage, clamping by zener diode withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms / 500vdc / 25 / 70% rh 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. line regulation is measured from low line to high line at rated load. 5. load regulation is measured from 0% to 100% rated load. 6. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still mee ts emc directives. for guidance on how to perform these emc tests, please refer to ?emi testing of c omponent power supplies.? (as available on http://www.meanwell.com) environment safety & emc (note 6) protection emi conduction & radiation ripple & noise (max.) note.2 voltage tolerance note.3 25w single output switching power supply r s - 2 5 s e r i e s compliance to en61000-4-2,3,4,5,6,8,11; env50204, light indus try level, criteria a 0.2kg; 60pcs/13kg/0.46cuft universal ac input / full range protections: short circuit / overload / over voltage cooling by free air convection led indicator for power on 100% full load burn-in test all using 105 withstand 300vac surge input for 5 second high operating temperature up to 70 withstand 5g vibration test high efficiency, long life and high reliability 3 years warranty long life electrolytic capacitors no load power consumption<0.5w features : www..net
1 led +v adj. 23 5 4 14 max. 7.62 6 2-m3 66.5 10.5 55 78 2.75 14 28 2-m3 l=4 25.4 51 mechanical specification case no.931a unit:mm ambient temperature ( ) load (%) -20 0 20 10 30 40 20 40 80 60 100 60 70 50 terminal pin no. assignment pin no. pin no. 12 4 3 5 assignment assignment dc output -v dc output +v fg ac/l ac/n static characteristics (24v) output voltage (v) output ripple (mvp-p) 150 100 50 25 200 250 300 input voltage (vac) 60hz 80 60 120 100 160 140 200 180 240 220 264 ta=25 28 32 24 20 16 12 8 block diagram fosc : 60khz control -v +v rectifiers & filter switching power filter & rectifiers o.l.p. detection circuit pwm fg i/p filter emi 3.3v only others (horizontal) derating curve 25w single output switching power supply r s - 2 5 s e r i e s file name:RS-25-spec 2010-10-18
|
