View LTI400HA01_2096091.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1bhf ( %pd/p -5*)" .0%&- product information product information samsung tft-lcd model : LTI400HA01 samsung tft samsung tft - - lcd lcd model model : LTI400HA01 : LTI400HA01 the information described in this specification is preliminary and can be changed without prior notice date : 08.dec.2008 "11307&%#: nam-heon kim date 08.dec.2008 date 08.dec.2008 13&1"3&%#: yu-geun lee did development team, lcd business samsung electronics co . , ltd. www..net www..net
1bhf ( %pd/p -5*)" .0%&- contents revision history ------ ------------------- ------------------ ------------------ ------------------ ------------- (3) general description -------------- ----------------- --------------- --------------- --------------- ----------- (4) general information ----------- ------------------ ----------------- ------------------- --------------- ------- (4) 1. absolute maximum rating s ----------------- ------------------- --------------- --------------- -------- (5) 2. application information for did (digital information display) ------ ----------------- ----------- (6) 3. optical characteristics ---------------------- ----------------- ------------------- --------------- -------- (7) 4. electrical characteristi cs --------------------- ----------------- --------------- --------------- --------- (10) 4.1 tft lcd module 4.2 back light unit 4.3 inverter input & specification 5. input terminal pin assignment ------------- ----------------- --------------- --------------- --------- (13) 5.1 input signal & power 5.2 inverter input pin configuration 5.3 inverter input power sequence 5.4 lvds interface 5.5 input signals, basic display colo rs and gray scale of each color 6. interface timing ------------- ------------------ ----------------- --------------- --------------- ---------- (18) 6.1 timing parameters (de only mode) 6.2 timing diagrams of interface signal (de only mode) 6.3 power on/off sequence 7. outline dimension ------------- ----------------- ------------------- --------------- --------------- ------- (21) 8. packing -------------- ------------------- ------------------ ------------------ ------------------ ------------ (23) 9. marking & others ------------ ------------------ ----------------- --------------- --------------- ---------- (24) 10. general precaution ------ ------------------- ----------------- ------------------- --------------- ------- (25) 10.1 handling 10.2 storage 10.3 operation 10.4 operation condition guide 10.5 others www..net www..net
1bhf ( %pd/p -5*)" .0%&- * revision history first issued all 000 dec 08, 2008 summary page rev. no date www..net www..net
1bhf ( %pd/p -5*)" .0%&- LTI400HA01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft(thin film transistor) as switch ing components. this model is composed of a tft lcd panel, a driver circ uit and a back light unit. t he resolution of a 40.0? is 1920 x 1080 and this model c an display up to 16.7 million co lors with wide viewing angle of 89 ? or higher in all directions. this panel is intended to supp ort applications to provide a excellent performance for flat panel display such as home-alone multimedia tft-lcd tv, display terminals for av application product s, and digital inform ation display (did). ? rohs compliance (pb-free) ? high contrast ratio, high aperture ratio ? spva(super patterned vertical align) mode ? wide viewing angle ( ? 178 ? ) ? high speed response ? landscape / portra it type compatible ? wide uxga (1920 x 1080 pi xels) resolution (16:9) ? low power consumption ? direct type 14 ccfts(cold cathode fluorescent tube) ? de(data enable) mode ? lvds (low voltage differential si gnaling) interface (2pixel/clock) features description general description general information 52.5(d max ) mm 0.46125(h) x 0.46125(v) pixel pitch g 10,000(max.) weight ? 1.0mm mm 952.0(w typ ) x 551.0(h typ ) module size mm 885.6(h) x 498.15(v) active display area note haze 44% , hard-coating (3h) surface treatment cd/m 2 450 (typ.) luminance of white normally black display mode rgb vertical stripe pixel arrangement pixel 1920 x 1080 number of pixels colors 8 bit - 16.7m display colors unit specification items www..net www..net
1bhf ( %pd/p -5*)" .0%&- fig. temperature and relative humidity range 50 (1) v 13.2 gnd-0.5 v dd power supply voltage t. uniformity center ? 10 - | t (4) g 1.5 - v nop vibration ( non - operating ) (3) g - s nop shock ( non - operating ) (2),(5) ? 50 0 t center glass surface temperature (operation) (2) ? 60 -20 t stg storage temperature note unit max. min. symbol item if the condition exceeds maxi mum ratings, it can cause ma lfunction or unrecoverable damage to the device. 1. absolute maximum ratings note (1) ta= 25 ? 2 ? c (2) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. relative humidity is 90% or less. (ta > 39 ? c) c. no condensation (3) 11ms, sine wave, one time for ? x, ? y, ? z axis (4) 10-300 hz, sweep rate 10min, 30min for x,y,z axis www..net www..net
1bhf ( %pd/p -5*)" .0%&- (5) definition of test point | t should be less than 10 ? ( | t = |t center ?t corner | ) ? 5mm 5mm lcd module (active) 5 12 4 3 t center : temperature of the center of the glass surface (test point 5) t corner : temperature of each edge of the glass surface (test point 1~4) 2. application inform ation for did (digital information display) a long-term display like did application may cause uneven display including image retention. to optimize module's lifetime and function, several operating usages are required. 1. normal operating condition - temperature: 20 ? 15 ? - humidity: 65 ? 20 % - display pattern: moving picture or regular switchover display note) long-term static information image may cause uneven display. 2. operating usages under abnormal operating condition. note (1) a. ambient condition - well-ventilated place is recommended to set up did system. b. power off and screen saver - periodical power-off or screen saver is needed after long-term static display. note (2) 3. operating usages to protect uneven display due to long-term static information display a. suitable operating time for b-did : under 12 hours a day. note (3) b. periodical display contents change from static image to moving picture. - liquid crystal refresh time is required. c. periodical background color and character (image) color change - use different colors for background and character (image), respectively. - change colors periodically. d. avoid combination of background and character with large different luminance. note (1) abnormal condition means every opera ting condition except normal operating condition. note (2) moving picture or black pattern is strongly recommended for screen saver. note (3) b-did means basic did products. 4. lifetime in this spec is guaranteed only when did is used under right operating usages. www..net www..net
1bhf ( %pd/p -5*)" .0%&- - 8 - normal l,r =0 u,d =0 viewing angle tg g-to-g (7) sr-3 % - 72 - - color gamut ver. hor. (4) sr-3 % 25 - - b uni brightness uniformity (9 points) - 89 75 d - 89 75 u - 89 75 r (8) sr-3 degree - 89 75 c/r ? 10 l viewing angle (7) sr-3 k - 10,000 - - color temperature white blue green red falling rising 0.290 wy 0.280 wx 0.062 by 0.147 bx 0.605 gy 0.284 gx 0.336 ry (7),(8) sr-3 typ. +0.03 0.641 typ. -0.03 rx color chromaticity (cie 1931) (6) sr-3 cd/m 2 - 450 400 y l luminance of white (center of screen) 9 6 - tf (5) bm-7 msec 20 15 - tr response time (3) sr-3 - 4000 3000 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item 3. optical characteristics the optical characteristics should be m easured in a dark ro om or equivalent. measuring equipment : topcon bm-7,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd = 12v, fv = 60hz, f dclk = 148.5mhz, i l = 11marms) note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the backlight at the given temperature for stabilization of the backlight. this should be measured in the center of screen. single lamp current : 11ma environment condition : ta = 25 ? 2 ? c www..net www..net
1bhf ( %pd/p -5*)" .0%&- photo detector lcd panel tft - lcd module the center of the screen sr-3 : 50 y bm-7 : 50 y field note (2) definition of test point y t ? a ? ? ? active area test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point ? of the panel cr g g / max min = gmax : luminance with all pixels white gmin : luminance with all pixels black 320 960 1600 900 540 180 2 ? bm-7 1 ? sr-3 field photo detector www..net www..net
1bhf ( %pd/p -5*)" .0%&- note (4) definition of 9 points brightness uniformity note (5) definition of response time : sum of tr, tf buni bb b =? ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness optical instruments response time t r t f 10% 90% white (data off) 0% black (data off) white (data on) 100% note (6) definition of luminance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (c/r ? 10) display data www..net www..net
1bhf ( %pd/p -5*)" .0%&- a) black pattern b) white pattern c) n-pattern (4) measurement conditions rush current i rush can be measured when t rush . is 470 k . t rush =470 k 100% gnd 90% 10% v dd (4) a 4 - - i rush rush current mhz 160.0 148.5 130.0 f dclk main frequency khz 75.0 67.5 48.0 f h hsync frequency hz 65 60 45 f v vsync frequency ma 1200 1100 - (c) n-pattern ma - 1000 - (b) white (2),(3) ma - 600 - i dd (a) black current of power supply (1) v 13.2 12.0 10.8 v dd voltage of power supply note unit max. typ. min. symbol item 4. electrical characteristics 4.1 tft lcd module the connector for displa y data & timing signal should be connected. ta = 25 ? c ? 2 ? c note (1) the ripple voltage should be controlled under 10% of v dd . (2) f v = 60hz, f dclk = 148.5mhz, v dd = 12.0v, dc current. (3) power dissipation check pattern (lcd module only) www..net www..net
1bhf ( %pd/p -5*)" .0%&- (1) hour - - 50,000 hr operating life time vrms 1060 990 920 v l lamp voltage marms 12.0 11.0 8.0 i l lamp current note unit max. typ. min. symbol item 4.2 back light unit the back light unit contains 14 direct-lighting type ccft s (cold cathode fluorescent tube). the characteristics of lamps are shown in the following tables. ta=25 ? 2 ? c lcd module inverter inverter hot 1 hot 2 hot 13 hot 14 cold 1 cold 2 cold 13 cold 14 gnd gnd note (1) it is defined as the time to take until the brightness reduces to 50% of its original value. [operating condition : ta = 25 ? 2 ? , il = 11.0marms, for single lamp only] www..net www..net
1bhf ( %pd/p -5*)" .0%&- v - - 3.3 max lum v dim dimming control 0 - - min. lum khz 45 43 41 vin=24.0v vdim=3.3v f lamp frequency after 1 hour warm-up 0.8 - 0 off - v 5.0 - 2.4 vin=24.0v on backlight on/off marms 11.5 11.0 10.5 vdim=3.3v i o,max lamp current a 6.6 - - vin=24.0v vdim=3.3v iin input current ta=25 ??$ v 26 24 22 - vin input voltage max. typ. min. note unit specifications conditions symbol items 4.3 inverter input condition & specification note (1) power consumption is measured at 450[cd/m2] of luminance condition which is the typical luminance value. lamp current is measured at the point before lamp. www..net www..net
1bhf ( %pd/p -5*)" .0%&- 5. input terminal pin assignment 5.1 input signal & power connector : fi-re51s-hf (jae) re[0]n re[3]p re[3]n gnd reclk+ reclk- gnd re[2]p re[2]n re[1]p re[1]n re[0]p ro[3]p ro[3]n gnd roclk+ roclk- gnd ro[2]p ro[2]n ro[1]p ro[1]n ro[0]p ro[0]n no connection 50 even lvds 25 no connection 49 gnd 24 no connection 51 no connection 48 no connection 23 no connection 47 no connection 22 no connection 46 21 lvds option 45 20 no connection 44 19 no connection 43 18 no connection 42 17 no connection 41 16 no connection 40 15 gnd 39 14 no connection 38 13 no connection 37 12 36 11 35 odd lvds signal 10 34 gnd 9 33 gnd 8 32 gnd 7 31 no connection 6 30 vdd (12v) 5 29 vdd (12v) 4 28 vdd (12v) 3 27 vdd (12v) 2 even lvds signal 26 vdd (12v) 1 description pin no. description pin no. note(1) no connection :these pins are only used for samsung internal purpose. (2) lvds option : high (3.3 v) a normal lvds format : low (gnd) or open (n.c) a jeida lvds format sequence :on = vdd(t1) ? lvds option ? interface signal(t2) off = interface signal(t3) ? lvds option ? vdd www..net www..net
1bhf ( %pd/p -5*)" .0%&- fig. connector diagram a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all n.c pins should be separated from other signal or power. note (2) lvds connector #1 #51 #1 #51 pin no. 1 pin no. 51 ? pcb www..net www..net
1bhf ( %pd/p -5*)" .0%&- no connection 14 dimming control [0v: min, 3.3v: max] 13 backlight on /off [on: 2.4 ~ 5.0v, off: 0 ~ 0.8v] 12 no connection 11 gnd 10 gnd 9 gnd 8 gnd 7 gnd 6 vin (24v) 5 vin (24v) 4 vin (24v) 3 vin (24v) 2 vin (24v) 1 pin configuration(function) pin no. 5.2 inverter input pin configuration connector : yeon ho, 20022wr-14b1 5.3 inverter input power sequence 0.5sec [min] vin (24v) dimming control 0.5sec [min] 0.1sec [min] 0.5sec [min] 1.1sec [min] 20msec [min] back light on/off 0.9 vin 0.1 vin 2.4 v www..net www..net
1bhf ( %pd/p -5*)" .0%&- 5.4 lvds interface - lvds receiver : tcon (merged) - data format (jeida & normal) de fault lvds option : jeida reserved reserved txin/rxout23 b7 b1 txin/rxout17 b6 b0 txin/rxout16 g7 g1 txin/rxout11 g6 g0 txin/rxout10 r7 r1 txin/rxout5 r6 r0 txin/rxout27 txout/rxin3 den den txin/rxout26 vsync vsync txin/rxout25 hsync hsync txin/rxout24 b5 b7 txin/rxout22 b4 b6 txin/rxout21 b3 b5 txin/rxout20 b2 b4 txin/rxout19 txout/rxin2 b1 b3 txin/rxout18 b0 b2 txin/rxout15 g5 g7 txin/rxout14 g4 g6 txin/rxout13 g3 g5 txin/rxout12 g2 g4 txin/rxout9 g1 g3 txin/rxout8 txout/rxin1 g0 g2 txin/rxout7 r5 r7 txin/rxout6 r4 r6 txin/rxout4 r3 r5 txin/rxout3 r2 r4 txin/rxout2 r1 r3 txin/rxout1 r0 r2 txin/rxout0 txout/rxin0 vesa -data jeida -data lvds pin www..net www..net
1bhf ( %pd/p -5*)" .0%&- 5.5 input signals, basic display co lors and gray scale of each color b255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b254 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b253 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g254 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green r255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic color b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) color note) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level voltage, 1 = high level voltage www..net www..net
1bhf ( %pd/p -5*)" .0%&- note unit max. typ. min. symbol item signal - clocks 2350 2200 2090 t h horizontal total - clocks - 1920 - t hd active display period horizontal display term - lines 1380 1125 1092 t v vertical total - lines - 1080 - t vd active display period vertical display term - hz 65 60 45 f v vsync - khz 75.0 67.5 48.0 f h hsync - mhz 160.0 148.5 130.0 1/t c frequency clock 6. interface timing 6.1 timing parameters (de only mode) note) this product is de only mode. t he input of hsync & v sync signal does not have an effect on normal operation. test point : ttl control signal and cl k at lvds tx input terminal in system www..net www..net
1bhf ( %pd/p -5*)" .0%&- 6.2 timing diagrams of interf ace signal (de only mode) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc www..net www..net
1bhf ( %pd/p -5*)" .0%&- 0 .pefm -5*)" %pd /p ( 1bhf 7. outline dimension (front view) www..net www..net
.pefm -5*)" %pd /p ( 1bhf 7. outline dimension (rear view) www..net www..net
1bhf ( %pd/p -5*)" .0%&- 8.2 packing specification 8. packing 8.1 carton (internal package) (1) packing form corrugated fiberboard box and corr ugated cardboard as shock absorber (2) packing method pallet(8kg) + module (9.5*10=95kg) + cushion (up + bottom=7kg) + pallet-box(6.7kg) 116.7 kg total pallet weight 1150mm(h) x 985mm(v) x 609mm(height) h x v x height total pallet size vertical packing direction 1. pallet weight = 8kg 1box / pallet pallet 1. 95 kg / lcd (10ea) 2. 7 kg / cushion-pallet (2ea) 3. 6.7 kg / packing-pallet box (1ea) 4. cushion-pallet material : eps 5. packing-pallet box material : dw4 10ea / (packing- pallet box) lcd packing remark specification item direction be able to open it packing -pallet box cushion-foam lcd module cushion-foam pallet-plastic www..net www..net
1bhf ( %pd/p -5*)" .0%&- 9. marking & others a nameplate bearing followed by is affix ed to a shipped prod uct at the specified location on each product. (1) part number : LTI400HA01 (2) revision: three letters (3) lot number : x x x x xxx xx x cell position no. (in the glass) glass no. (in the one lot) lot no. (glass) month year (note1) product code line 40mm 80mm week code : 05 29 week year (4) nameplate indication (6) others 1. after service part lamps cannot be replaced because of the narrow bezel structure. (5) packing box attach part number 100mm 165mm box serial number -5*)" 9999 LTI400HA01 9999999999 999 lot number revision code www..net www..net
1bhf ( %pd/p -5*)" .0%&- 10. general precautions 10.1 handling (a) when the module is assembled, it should be attached to the system firmly using all mounting holes. be careful not to twist and bend the module. (b) because the inverter us e high voltage, it should be disconnected from power before it is assembled or disassembled. (c) refrain from strong mechanical shock and / or any force to the module. in addition to damage, this may cause im proper operation or damage to the module and ccft back light. (d) note that polarizers are very fragile and coul d be damage easily. do not press or scratch the surf ace harder than a hb pencil lead. (e) wipe off water droplets or oil immedi ately. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorbe nt cotton or soft cloth. (g) desirable cleaners are water, ipa(isopropy l alcohol) or hexane. do not use ketone type materi als(ex. acetone), ethyl alco hol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarizer due to chemical reaction. (h) if the liquid crystal material leaks fr om the panel, it should be kept away from the eyes or mouth . in case of cont act with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep displa y clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the module should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. www..net www..net
1bhf ( %pd/p -5*)" .0%&- 10.2 storage (a) do not leave the module in high temper ature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunlight. (c) the module should be stored in a dark plac e. it is prohibited to apply sunlight or fluorescent light in storing. 10.3 operation (a) do not connect or disconnect t he module in the "power on" condition. (b) power supply should always be turned on/off by the "power on/off sequence" (c) module has high frequ ency circuits. sufficient suppr ession to the electromagnetic interference should be done by system manufacturers. grounding and shielding meth ods may be important to mi nimize the interference. (d) the cable between the back light connector and its inverter power supply should be connected directly with a minimi zed length. a longer cable between the back light and the inverter may ca use lower luminance of lamp(ccft) and may require higher startup voltage(vs). 10.4 operation condition guide (a) the lcd product should be oper ated under norm al conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 55 ? 20% - display pattern : continually ch anging pattern (not stationary) (b) if the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time etc.., it is strongly recommended to contact sec for application engineerin g advice. otherwise, its reliability and function may not be guarant eed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www..net www..net
1bhf ( %pd/p -5*)" .0%&- 10.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) module should be turned clockwise (regular front view perspective) when used in portrait mode (c) avoid condensation of water. it may result in improper operat ion or disconnection of electrode. (d) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and envir onmental temperature, and so on) otherwise the module may be damaged. (e) if the module keeps displaying the sa me pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (f) this module has its circuitry pcb's on the rear side and should be handled carefully in order not to be stressed. (g) please contact sec in advance when you display the sa me pattern for a long time. www..net www..net

▲Up To Search▲

Price & Availability of LTI400HA01

	To Download LTI400HA01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .