View IE-78K0-NS_2073151.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document no. u13731ej3v0um00 (3rd edition) date published may 2003 n cp(k) printed in japan user?s manual IE-78K0-NS in-circuit emulator target devices 78k/0 series ?
user?s manual u13731ej3v0um 2 [memo]
user?s manual u13731ej3v0um 3 v40 family is a trademark of nec electronics corporation. windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. the information in this document is current as of february, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec elect ronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
user?s manual u13731ej3v0um 4 regional information ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. [global support] http://www.necel.com/en/support/support.html nec electronics america, inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 nec electronics hong kong ltd. hong kong tel: 2886-9318 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-558-3737 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 nec electronics singapore pte. ltd. novena square, singapore tel: 6253-8311 j03.4 n ec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 ?sucursal en espa?a madrid, spain tel: 091-504 27 87 v lizy-villacoublay, france tel: 01-30-67 58 00 ?succursale fran?aise ?filiale italiana milano, italy tel: 02-66 75 41 ?branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 ?tyskland filial taeby, sweden tel: 08-63 80 820 ?united kingdom branch milton keynes, uk tel: 01908-691-133 some information contained in this document may vary from country to country. before using any nec electronics product in your application, piease contact the nec electronics office in your country to obtain a list of authorized representatives and distributors. they will verify:
user ? s manual u13731ej3v0um 5 major revisions in this edition page description throughout change of interface board for desktop pc from ie-70000-pci-if to ie-70000-pci-if-a p.12 modification of figure 1-1 IE-78K0-NS system configuration p.36 a.1 introduction ? deletion of applicable models p.38 b.1 introduction ? deletion of applicable models the mark shows major revised points.
user?s manual u13731ej3v0um 6 introduction product overview the IE-78K0-NS is used in combination with an emulation board (ie-780 -ns-em1, ie-780 -ns-em4), i/o board (IE-78K0-NS-p0 ), and performance board (ie-78k0- ns-pa) to debug products in the 78k/0 series of 8-bit single-chip microcontrollers. target readers this manual is intended for engineers who perform debugging of systems that employ 78k/0 series 8-bit single-chip microcontrollers with the IE-78K0-NS and an emulation board (ie-780 -ns-em1, ie-780 -ns-em4), i/o board (IE-78K0-NS-p0 ), and performance board (IE-78K0-NS-pa). purpose the purpose of this manual is to help the user understand the debugging functions that are available by using the IE-78K0-NS and the emulation board (ie-780 -ns-em1, ie-780 -ns-em4), i/o board (IE-78K0-NS-p0 ), and performance board (ie-78k0- ns-pa) together. organization when using the IE-78K0-NS, please refer to the manual that comes with the ie-78k0- ns (this manual) as well as the manual that comes with the emulation board (ie- 780 -ns-em1, ie-780 -ns-em4), i/o board (IE-78K0-NS-p0 ), and performance board (IE-78K0-NS-pa). ? basic specifications ? function outline ? system configuration ? target interface differences ? external interface function how to read this manual to understand the overall functions of the IE-78K0-NS: read this manual in the order of the contents. to understand the basic specifications: refer to chapter 1 general and chapter 2 part names . for how to connect the ie-780 -ns-em1, ie-780 -ns-em4, IE-78K0-NS-p0 , ie- 78k0-ns-pa and make settings to debug 78k/0 series products: refer to chapter 3 installation . IE-78K0-NS user?s manual (this manual) ie-780 -ns-em1 ie-780 -ns-em4 IE-78K0-NS-p0 IE-78K0-NS-pa user?s manual
user?s manual u13731ej3v0um 7 terminology the meanings of the terms used in this manual are described in the table below. term meaning emulation device this is a general term that refers to the device in the emulator that is used to emulate the target device. it includes the emulation cpu. emulation cpu this is the cpu block in the emulator that is used to execute user-generated programs. target device this is the device to be emulated. target program this is the program to be debugged. target system this is the system to be debugged. this includes the target program and the hardware provided by the user. when defined narrowly, it includes only the hardware. conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information related documents please use the following documents in conjunction with this manual. the related documents listed below may include preliminary versions. however, preliminary versions are not marked as such. { documents related to development tools (user?s manuals) document name document number IE-78K0-NS in-circuit emulator this manual operation u14445e language u14446e ra78k0 assembler package structured assembly language u11789e operation u14297e cc78k0 c compiler package language u14298e operation (windows tm based) u15373e sm78k series ver.2.30 or later system simulator external part user open interface specifications u15802e id78k series integrated debugger ver.2.30 or later operation (windows based) u15185e id78k0 integrated debugger (ews based) reference ? basics u11537e rx78k0 real-time os installation u11536e project manager ver. 3.12 or later (windows based) u14610e pg-fp4 flash memory programmer u15260e caution the documents listed above are subject to change without notice. be sure to use the latest documents for designing, etc.
user?s manual u13731ej3v0um 8 contents chapter 1 general ........................................................................................................... .................11 1.1 system configuration........................................................................................................ ............11 1.2 hardware configuration ...................................................................................................... ..........13 1.3 basic specifications ........................................................................................................ ..............15 1.4 contents in carton.......................................................................................................... ...............17 chapter 2 part names....................................................................................................... ..............19 2.1 parts of main unit .......................................................................................................... ................19 2.2 board name.................................................................................................................. ..................21 chapter 3 installation ...................................................................................................... .............23 3.1 connection .................................................................................................................. ...................23 3.2 external trigger functions .................................................................................................. .........32 3.3 jumper settings (on main board (g-780009 board)) .................................................................33 3.4 low-voltage emulation settings.............................................................................................. ....34 appendix a interface board (ie-70000-pci-if-a) for desktop pc .................................36 a.1 introduction ................................................................................................................ ....................36 a.2 installation ................................................................................................................ ......................37 appendix b pc card interface (ie-70000-cd-if-a) ..................................................................38 b.1 introduction ................................................................................................................ ....................38 b.2 installation ................................................................................................................ ......................39 appendix c interface board (ie-70000-98-if-c) for pc-9800 series ...............................40 c.1 introduction ................................................................................................................ ....................40 c.2 installation ................................................................................................................ ......................41 appendix d interface board (ie-70000-pc-if-c) for ibm pc/at compatibles ............43 d.1 introduction ................................................................................................................ ....................43 d.2 installation ................................................................................................................ ......................44 appendix e revision history ................................................................................................ .........46
user?s manual u13731ej3v0um 9 list of figures figure number title page 1-1 IE-78K0-NS system configuration ............................................................................................ ........................ 12 1-2 IE-78K0-NS basic hardware configuration 1.................................................................................. .................. 13 1-3 IE-78K0-NS basic hardware configuration 2.................................................................................. .................. 13 1-4 IE-78K0-NS basic hardware configuration 3.................................................................................. .................. 14 1-5 IE-78K0-NS basic hardware configuration 4.................................................................................. .................. 14 1-6 contents in carton......................................................................................................... .................................... 17 1-7 contents in accessory bag .................................................................................................. ............................. 18 2-1 main board (g-780009 board) ................................................................................................ .......................... 22 3-1 connecting emulation board (ie-780 -ns-em1) .......................................................................................... 24 3-2 connecting performance board and emulation board (ie-780 -ns-em1) .................................................. 25 3-3 connecting i/o board and emulation board (ie-780 -ns-em4) ................................................................... 27 3-4 connecting performance board, i/o board and emulation board ............................................................... .... 28 3-5 connecting emulation probe................................................................................................. ............................ 30 3-6 connecting ac adapter...................................................................................................... ............................... 31 3-7 connecting dedicated bus interface cable................................................................................... .................... 31 3-8 default settings of jp2, jp3, jp4, jp6, jp7, and jp8 ....................................................................... ............... 33 3-9 part names of g-780009 board ............................................................................................... ......................... 34 3-10 position of tp1 on IE-78K0-NS ............................................................................................. ............................ 34 3-11 position of tp1 on ie-78018-ns-em1 ........................................................................................ ....................... 35 a-1 mounting of pci board and connector boards ................................................................................. ................ 37 c-1 int jp, wait jp settings ................................................................................................... .............................. 42 d-1 int jp, wait jp settings ................................................................................................... .............................. 45
user?s manual u13731ej3v0um 10 list of tables table number title page 1-1 list of functions (max. specifications) ..................................................................................... ........................15 3-1 electrical specifications ................................................................................................... ..................................32 c-1 sw1 and sw2 settings when setting i/o address to 01d h...........................................................................41 d-1 sw1 and sw2 settings when setting i/o address to 020 h ...........................................................................44
user?s manual u13731ej3v0um 11 chapter 1 general the IE-78K0-NS is a development tool for effectively debugging hardware and software in which a 78k/0 series 8- bit single-chip microcontroller is used. this chapter describes the system configuration and basic specifications of the IE-78K0-NS. 1.1 system configuration figure 1-1 shows the system configuration of the IE-78K0-NS.
chapter 1 general user?s manual u13731ej3v0um 12 figure 1-1. IE-78K0-NS system configuration integrated debugger id78k0-ns (sold separately) device file note 4 (available separately) interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface board ie-70000-pci-if-a (sold separately) or IE-78K0-NS (this product) pc card interface + ++ + performance board IE-78K0-NS-pa emulation board ie-78 -ns-em1 (sold separately) ac adapter ie-70000-mc-pc-b (sold separately) i/o board IE-78K0-NS-p0 (sold separately) emulation board ie-780 -ns-em4 (sold separately) control software host machine pc-9800 series, ibm pc/at tm compatibles interface cable ns card cable mc card cable note 5 pc card interface ie-70000-cd-if-a (sold separately) interface cable (ns interface cable) in-circuit emulator emulation probe np- note 2 (sold separately) convertion socket ev- - tqx- note 3 notes 1. when using the ie-780 -ns-em4, it is necessary to connect an i/o board, IE-78K0-NS-p0 . the ie-780 -ns-em4 and IE-78K0-NS-p0 are sold separately. 2. the np- is a product of naito densei machida mfg. co., ltd. for further information, contact naito densei machida mfg. co., ltd. (tel: +81-45-475-4191) 3. the tqx-xxxxxx are products of tokyo eletech corporation. for further information, contact daimaru kogyo co., ltd. tokyo electronics department (tel: +81-3-3820-7112) osaka electronics department (tel: +81-6-6244-6672)
chapter 1 general user ? s manual u13731ej3v0um 13 notes 4. the device file can be downloaded from the nec electronics website (url: http://www.necel.com/micro). 5. this is a cable for the v850 series. this is not used for the IE-78K0-NS. 1.2 hardware configuration the IE-78K0-NS consists of the following hardware units (such as cabinet and boards). ? cabinet ? 78k0 main board ? ns interface cable ? plastic spacers 2 figure 1-2. IE-78K0-NS basic hardware configuration 1 IE-78K0-NS host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board 78k0 series em1 board emulation probe (sold separately) figure 1-3. IE-78K0-NS basic hardware configuration 2 IE-78K0-NS 78k0 option board 78k0 series em1 board host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board external sense probe emulation probe (sold separately)
chapter 1 general user ? s manual u13731ej3v0um 14 figure 1-4. IE-78K0-NS basic hardware configuration 3 IE-78K0-NS host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board emulation board 2 (IE-78K0-NS-p0 ) 78k0 series em4 board emulation probe (sold separately) figure 1-5. IE-78K0-NS basic hardware configuration 4 host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board 78k0 option board emulation board 2 (ie-78k0 -ns-p0 ) 78k0 series em4 board emulation probe (sold separately) external sense probe
chapter 1 general user ? s manual u13731ej3v0um 15 1.3 basic specifications table 1-1. list of functions (max. specifications) (1/2) parameter description supervisor v40 tm (operating frequency: 16.0 mh z ) target device 78k/0 series ( pd780 ) system clock according to specification of emulation board (sold separately) external pulse input clock supply internal mounted on emulation board (sold separately) substitute memory capacity 64 kb internal rom 4 kb internal high- speed ram 64 bytes internal low-speed ram 128 bytes mapping unit external expansion memory 8 kb emulation function ? real-time execution ? break execution ? step execution real-time internal ram monitor 2 kb of memory space event detection ? program execution detection ? bus event detection ? external trigger detection trigger output (open drain output (1)) event integration ? path condition ? trace qualify condition ? delay condition ? trigger condition break factor ? event break ? manual break ? command break ? fail-safe break trace factor ? all traces ? qualify trace trace capacity 32 bits 8 kb real-time trace trace content address, data, and status
chapter 1 general user ? s manual u13731ej3v0um 16 table 1-1. list of functions (max. specifications) (2/2) parameter description execution time measurement up to 4 mins 28 sec, resolution: 62.5 ns target interface emulation probe (sold separately) provided for each target device shape host interface dedicated bus interface low-voltage support based on the emulation board (sold separately) host machine pc-9800 series, or ibm pc/at compatibles power supply dc 5 v operation temperature range 10 c to 40 c dimensions w240 d197 h73 (mm)
chapter 1 general user ? s manual u13731ej3v0um 17 1.4 contents in carton the IE-78K0-NS carton contains the main unit, cables, an accessory bag, and a guarantee card. make sure that the accessory bag contains a packing list, this user ? s manual, spacers, and screws. in case of missing or damaged items, please contact an nec electronics sales representative or nec electronics distributor. figure 1-6. contents in carton <2> ns interface cable <3> fg cable <4> accessory bag <1> IE-78K0-NS <5> guarantee card <1> IE-78K0-NS main unit 1 <2> ns interface cable 1 <3> fg cable 1 <4> accessory bag 1 <5> guarantee card 1
chapter 1 general user ? s manual u13731ej3v0um 18 check that the accessory bag contains the following items (refer to figure 1-7 contents in accessory bag ). packing list 1 user ? s manual (this manual) 1 spacers 2 screws 4 figure 1-7. contents in accessory bag packing list user's manual spacers screws
user?s manual u13731ej3v0um 19 chapter 2 part names this chapter introduces the parts of the IE-78K0-NS main unit. the packing box contains the IE-78K0-NS main unit. if there are any missing or damaged items, please contact an nec sales representative. please make sure to fill out and return the guarantee card that comes with the main unit. 2.1 parts of main unit (1) probe end t v c c target system power supply led probe interface small: 13 158 mm large: 16 158 mm (2) top view power in circuit emulator power supply led
chapter 2 part names user ? s manual u13731ej3v0um 20 (3) interface fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on)
chapter 2 part names user?s manual u13731ej3v0um 21 2.2 board name the IE-78K0-NS contains the following board. ? main board (g-780009 board) 1 check that you have the correct board. to access the inside of the unit, remove the four screws from the sides of the main unit and open the lid.
chapter 2 part names user ? s manual u13731ej3v0um 22 figure 2-1. main board (g-780009 board) remark the main board is shown mounted in the main unit
user?s manual u13731ej3v0um 23 chapter 3 installation this chapter describes how to connect the cables to the IE-78K0-NS and the mode settings. 3.1 connection connect the following ten products, which are sold separately. refer to figure 1-1 system configuration of IE-78K0-NS in chapter 1 general for the system configuration of the IE-78K0-NS. ? ie-70000-98-if-c: interface board (use cable that comes with IE-78K0-NS) ? ie-70000-pc-if-c: interface board (use cable that comes with IE-78K0-NS) ? ie-70000-pci-if-a: interface board (use cable that comes with IE-78K0-NS) ? ie-70000-cd-if-a: pc card interface (use ns card cable) ? ie-70000-mc-ps-b: ac adapter ? ie-780 -ns-em1: emulation board ? ie-780 -ns-em4: emulation board ? IE-78K0-NS-p0 : i/o board ? IE-78K0-NS-pa: performance board ? np- : emulation probe caution connecting and removing cables or components from the target system and changing the settings of switches, etc. should be carried out after turning off the power of the IE-78K0-NS main unit and the target system.
chapter 3 installation user?s manual u13731ej3v0um 24 (1) connecting emulation board (ie-780 -ns-em1) the ie-780 -ns-em1 is sold separately. figure 3-1. connecting emulation board (ie-780 -ns-em1) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> replace the spacers (metal) of the main board, as indicated in the diagram below, with the spacers (plastic) attached to the ie- 78k0-ns. caution this procedure is needed only when using the ie-78018-ns- em1. <5> when using a probe, connect the probe. <2> remove the first plate from the bottom by removing the screws. <4> connect the ie-780 -em1 and fasten the two screws to the emulation board. <6> replace the top cover and fasten the four screws on the sides. here emulation board refer to (5) for the probe connection method.
chapter 3 installation user ? s manual u13731ej3v0um 25 (2) connecting performance board (IE-78K0-NS-pa) and emulation board (ie-780 -ns-em1) the IE-78K0-NS-pa and ie-780 -ns-em1 are sold separately. figure 3-2. connecting performance board and emulation board (ie-780 -ns-em1) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> connect the IE-78K0-NS-pa and affix the attached spacers to the IE-78K0-NS-pa at five points on the board. <5> connect the ie-78 -ns-em1 on the ie- 78k0-ns-pa and fasten the two screws. <2> remove the first and second plates from the bottom by removing the screws. <4> when only connecting the ie-78018-ns-em1 on the IE-78K0-NS-pa, remove spacer 1 (metal) of the following figure and replace spacers 2 and 3 (metal) with the attached spacers (plastic). <6> when using a probe, connect the probe. here IE-78K0-NS-pa attached spacer attached spacer fix fix spacers 2 and 3 spacer 1 ie-780 -n s-em1 IE-78K0-NS-pa refer to (5) for the probe connection method. refer to the IE-78K0-NS-pa user's manual for the ext cable connection method.
chapter 3 installation user ? s manual u13731ej3v0um 26 figure 3-2. connecting performance board and emulation board (ie-780 -ns-em1) (2/2) <7> replace the top cover and fasten the four screws on the sides. ie-780 -ns-em1 IE-78K0-NS-pa
chapter 3 installation user ? s manual u13731ej3v0um 27 (3) connecting i/o board (IE-78K0-NS-p0 ) and emulation board (IE-78K0-NS-p0 and ie-780 -ns-em4) the IE-78K0-NS-p0 and ie-780 -ns-em4 are sold separately. figure 3-3. connecting i/o board and emulation board (ie-780 -ns-em4) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> connect the IE-78K0-NS-p0 to the main board. fix the attached spacers to the ie- 78k0-ns-p0 at the four corners of the board. <5> when using a probe, connect the probe. <2> remove the second plate from the bottom by removing the screws. <4> connect the ie-780 -ns-em4 on the ie-78k0- ns-p0 , and fasten the screws at the four corners. <6> replace the top cover and fasten the four screws on the sides. refer to (5) for the probe connection method. IE-78K0-NS-p0 fix attached spacer attached spacer fix IE-78K0-NS-p0 ie-780 -ns-em4 IE-78K0-NS-p0 ie-780 -ns-em4
chapter 3 installation user ? s manual u13731ej3v0um 28 (4) connecting performance board (IE-78K0-NS-pa), i/o board (IE-78K0-NS-p0 ) and emulation board (ie- 780 -ns-em1 and ie-78k -ns-em4) the IE-78K0-NS-pa, IE-78K0-NS-p0 , and ie-780 -ns-em4 are sold separately. figure 3-4. connecting performance board, i/o board and emulation board (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> connect the IE-78K0-NS-pa and affix the attached spacers to the IE-78K0-NS-pa at five points on the board. <5> connect the ie-780 -ns-em4 on the ie- 78k0-ns-p0 , and fasten the screws at the four corners. <2> remove the first and third plates from the bottom by removing the screws. <4> connect the IE-78K0-NS-p0 on the ie- 78k0-ns-pa, and fix the spacers to the ie- 78k0-ns-p0 at the four corners. <6> when using a probe, connect the probe. IE-78K0-NS-pa IE-78K0-NS-p0 IE-78K0-NS-pa attached spacer attached spacer fix fix here attached spacer attached spacer fix fix ie-78 -ns-em4 IE-78K0-NS-pa IE-78K0-NS-p0 refer to (5) for the probe connection method. refer to the IE-78K0-NS-pa user's manual for the ext cable connection method.
chapter 3 installation user ? s manual u13731ej3v0um 29 figure 3-4. connecting performance board, i/o board and emulation board (2/2) <7> replace the top cover and fasten the four screws on the sides. ie-78k0 - ns-p0 IE-78K0-NS-pa ie-78 - ns-em4
chapter 3 installation user ? s manual u13731ej3v0um 30 (5) connecting emulation probe (np- ) the np- is sold separately. figure 3-5. connecting emulation probe IE-78K0-NS-p0 (this is necessary only when mounting the ie-780 -ns-em4 ) IE-78K0-NS-pa emulation probe (np- ) emulation probe (np- ) ie-780 -ns-emn (n = 1, 4) ie-780 -ns-emn (n = 1, 4) main board (g-780009 board) main board (g-780009 board) IE-78K0-NS-p0 (this is necessary only when mounting the ie-780 -ns-em4 ) caution the emulation probe (np- ) mounting location varies depending on the model of the ie- 780 -ns-emn (n = 1 or 4) in use. for details, refer to the ie-780 -ns-emn user?s manual.
chapter 3 installation user ? s manual u13731ej3v0um 31 (6) connecting ac adapter (ie-70000-mc-ps-b) the ie-70000-mc-ps-b is sold separately. <1> insert the ac adapter plug into the dc in socket of the IE-78K0-NS. figure 3-6. connecting ac adapter fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) (7) connecting interface cable <1> insert the cable into the bus interface connector on the IE-78K0-NS main unit. figure 3-7. connecting dedicated bus interface cable fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) caution the type of interface cable varies depending on whether an interface board or a pc card interface is used. ? ? ? ? when using an interface board (ie-70000-98-if-c, ie-70000-pc-if-c, or ie-70000-pci-if-a) connect the ns interface cable that comes with the IE-78K0-NS. ? ? ? ? when using a pc card interface (ie-70000-cd-if-a) connect the ns card cable that comes with the ie-70000-cd-if-a. the ie-70000-98-if-c, ie-70000-pc-if-c, ie-70000-pci-if-a, and ie-70000-cd-if-a are sold separately.
chapter 3 installation user ? s manual u13731ej3v0um 32 3.2 external trigger functions (1) extout at the occurrence of a break event, the extout pin on the emulation board outputs a low level for 1.3 s. caution because the output is open drain, connect a pull-up resistor in the target system. (2) extin the extin pin on the emulation board can be used to input an event signal. enter high-level pulse signals for two or more cpu clocks. caution for the electrical specifications, refer to table 3-1. table 3-1. electrical specifications parameter min. [v] max. [v] high-level input voltage target voltage 0.7 target voltage low-level input voltage 0 target voltage 0.3
chapter 3 installation user ? s manual u13731ej3v0um 33 3.3 jumper settings (on main board (g-780009 board)) (1) default jumper settings figure 3-8. default settings of jp2, jp3, jp4, jp6, jp7, and jp8 135 24 jp6 6 123 jp2 123 jp3 123 jp4 135 24 jp8 6 135 24 jp7 6 jp8: selection of the subsystem clock source (default setting: 1 and 2 shorted) 1 and 2 shorted: internal (mounted on the emulation board or mounted on the part board by the user) 3 and 4 shorted: external (input via an emulation probe from the target system) caution jumper settings differ depending on the emulation board. for details, refer to the relevant emulation board user?s manual.
chapter 3 installation user ? s manual u13731ej3v0um 34 figure 3-9. part names of g-780009 board cn7 jp6 jp4 jp3 p2 cn6 jp2 tp1 jp8 jp7 cn5 p1 cn4 3.4 low-voltage emulation settings low-voltage emulation can be executed in the IE-78K0-NS by connecting an emulation board that supports low- voltage operation. (1) when using other than the ie-78018-ns-em1 when the target is at low voltage, supply the same supply voltage as that of the target to the IE-78K0-NS tp1 terminal pin. (this also applies when the voltage is 5 v.) figure 3-10. position of tp1 on IE-78K0-NS cn7 p2 cn6 tp1 cn5 p1 cn4 remark the maximum current consumption of tp1 is from 100 ma (1.8 v) to 300 ma (5 v).
chapter 3 installation user ? s manual u13731ej3v0um 35 (2) when using the ie-78018-ns-em1 when the target is at low voltage, supply the same supply voltage as that of the target to the tp1 terminal pin on the ie-78018-ns-em1. (this also applies when the voltage is 5 v.) figure 3-11. position of tp1 on ie-78018-ns-em1 cn1 cn2 tp1 remark the maximum current consumption of tp1 is from 100 ma (1.8 v) to 300 ma (5 v). caution for details of the target voltage or maximum current consumption, refer to the relevant emulation board user?s manual.
user?s manual u13731ej3v0um 36 appendix a interface board (ie-70000-pci-if-a) for desktop pc this chapter describes the setting method when connecting the IE-78K0-NS. for details, refer to the ie-70000-pci-if-a user?s manual (to be prepared). a.1 introduction the ie-70000-pci-if-a is an interface board for an ie product that is installed in the pci bus slot of a pc. first of all, check that you have the following items. ? interface board (ie-70000-pci-if-a) for desktop pc 1 ? 8-bit connector board (connected to ie-70000-pci-if-a) 1 ? 32-bit connector board 1 ? user?s manual 1 ? dll-disk 1 ? drv-disk 1 hardware resources used ? i/o address .........0000h to ffffh ? interrupts ............unused ? memory...............uses 80 bytes current consumption 300 ma (max. when using +5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subject it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extreme changes in temperature or humidity. 6. do not spill drinks or other liquids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix a interface board (ie-70000-pci-if-a) for desktop pc user ? s manual u13731ej3v0um 37 a.2 installation (1) board settings there are no jumpers or dip switches on the ie-70000-pci-if-a. (2) 8-bit connector board mounting an 8-bit connector board is premounted at shipment. remark when a 32-bit board is mounted, place it on the 8-bit connector board using the combination connector (refer to figure a-1 ) and fasten them together. caution the 32-bit connector board is attached for future function expansion. figure a-1. mounting of pci board and connector boards ch1 ch0 pci board 32-bit connector board combination connector combination connector combination connector 8-bit connector board (3) installation in pc make sure that the pc is turned off, then install the interface board in the pci bus slot following the instructions in the pc ? s manual. (4) pci driver installation refer to the supplied drv_disk readme_e.txt for pci driver installation. (5) connecting with IE-78K0-NS using the supplied cable, connect the IE-78K0-NS to the ch0 side. caution connection with the IE-78K0-NS is possible on the ch0 side only.
user?s manual u13731ej3v0um 38 appendix b pc card interface (ie-70000-cd-if-a) this chapter describes the setting method when connecting the IE-78K0-NS. for details, refer to the ie-70000-cd-if-a user?s manual (to be prepared). b.1 introduction the pc card interface (ie-70000-cd-if-a) is an interface card for an ie product that is installed in a pc pci bus slot compliant with pcmcia2.1/jeida standard ver. 4.2. check that you have the following items. ? pc card interface (ie-70000-cd-if-a) 1 ? mc-a cable 1 ? ns-a cable 1 ? user?s manual 1 ? dll-disk 1 ? drv-disk 1 hardware resources used ? i/o address .........20 bytes starting from 220h, 260h, 2e0h, 320h, or 3e0h as a base address ? interrupts ............unused ? memory...............unused current consumption 300 ma (max. when using +5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subject it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extreme changes in temperature or humidity. 6. do not spill drinks or other liquids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix b pc card interface (ie-70000-cd-if-a) user?s manual u13731ej3v0um 39 b.2 installation (1) installation in pc insert the pcmcia card in the card slot when the power supply of the pc is turned on. for windows nt4.0, insert the card in the slot when the power supply is turned off. be careful to insert the card in the correct direction. (2) pcmcia driver installation refer to the supplied drv-disk readme_e.txt for pcmcia driver installation. caution this interface card cannot be connected to the ie-78 -r. actually, installation ends completely by selecting ?ie-78 -r? displayed in the drv-disk install menu. in this case, however, the installation is invalid. (3) connection with the IE-78K0-NS using the ns-a cable, connect the ie-70000-cd-if-a to the IE-78K0-NS. caution be sure to use the ns-a cable when connecting to the IE-78K0-NS. if mc-a is used, the ie- 70000-cd-if-a may be damaged.
user?s manual u13731ej3v0um 40 appendix c interface board (ie-70000-98-if-c) for pc-9800 series this chapter describes the setting method when connecting the IE-78K0-NS. for details, refer to the ie-70000-98-if-c user?s manual (to be prepared). c.1 introduction the ie-70000-98-if-c is an interface board for an ie product that is installed in the c bus slot of a pc9800 series machine. caution the pc98-nx series is treated as an ibm pc/at compatible machine. refer to appendix a interface board (ie-70000-pci-if(-a)) for desktop pc. first of all, check that you have the correct interface board. ? interface board (ie-70000-98-if-c) for pc-9800 series 1 applicable models this product is designed for devices incorporating a pc-9800 series c bus. hardware resources used ? i/o addresses .............. 16 bytes at a 256-byte boundary (00d h, 01d h,...ffd h) ? interrupts and others ... unused current consumption 500 ma (max. when using + 5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subject it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extreme changes in temperature or humidity. 6. do not spill drinks or other liquids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix c interface board (ie-70000-98-if-c) for pc-9800 series user?s manual u13731ej3v0um 41 c.2 installation (1) i/o address settings sw1 and sw2 are the switches selecting the c bus i/o addresses. sw1 numbers 1 to 8 correspond to c bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to c bus addresses a12 to a15. in the IE-78K0-NS, the addresses should be set in the 16 bytes between 00d h and ffd h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be values that are not used in the pc system or for other boards. in addition, since these values are used during software installation, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table c-1. sw1 and sw2 settings when setting i/o address to 01d h sw1 number12345678 address a4 a5 a6 a7 a8 a9 a10 a11 on 0 000 off 1 1 1 1 sw2 number12345678 address a12 a13 a14 a15 off off on off on 0 000 0 off 1 1 1 caution use the default setting for sw1 numbers 1 to 4.
appendix c interface board (ie-70000-98-if-c) for pc-9800 series user?s manual u13731ej3v0um 42 (2) jumper settings the int jp and wait jp are c bus interrupt and wait selection jumpers. in the IE-78K0-NS, set int jp to no use, and wait jp to 1 and 2 shorted. figure c-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp shorted no use ir3 ir5 ir6 ir9 ir11 ir12 ir13 (3) installation in pc make sure that the pc is turned off, then install the interface board in the c bus slot following the instructions in the pc ? s manual. (4) connecting with IE-78K0-NS using the supplied cable, connect the IE-78K0-NS to the ch0 side. caution connection with the IE-78K0-NS is possible on the ch0 side only. for connection with other models, refer to their respective manuals.
user?s manual u13731ej3v0um 43 appendix d interface board (ie-70000-pc-if-c) for ibm pc/at compatibles this chapter describes the setting method when connecting the IE-78K0-NS. for details, refer to the ie-70000-pc-if-c user?s manual (to be prepared). d.1 introduction the ie-70000-pc-if-c is an interface board for ibm pc/at compatibles that is installed in the isa bus slot of an ibm pc/at compatible. first of all, check that you have the correct interface board. ? interface board (ie-70000-pc-if-c) for ibm pc/at 1 applicable models the ie-70000-pc-if-c is designed for ibm pc/at compatibles incorporating an isa bus. hardware resources ? i/o address.................. 16 bytes at any 16-byte boundary (020 h to 03f h) ? interrupts and others ... unused current consumption 500 ma (max. when using + 5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subject it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extreme changes in temperature or humidity. 6. do not spill drinks or other liquids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix d interface board (ie-70000-pc-if-c) for ibm pc/at compatibles user?s manual u13731ej3v0um 44 d.2 installation (1) i/o address settings sw1 and sw2 are the switches selecting the isa bus i/o addresses. sw1 numbers 1 to 8 correspond to isa bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to isa bus addresses a12 to a15. in the IE-78K0-NS, the addresses should be set between 020 h and 03f h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be values that are not used in the pc system or for other boards. in addition, since these values are used during software installation, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table d-1. sw1 and sw2 settings when setting i/o address to 020 h sw1 number12345678 address a4a5a6a7a8a9a10a11 on 0 0000 00 off 1 sw2 number12345678 address a12 a13 a14 a15 off off on off on 0 000 0 off 1 1 1 caution set sw2 number 7 to on and sw2 numbers 5, 6, and 8 to off.
appendix d interface board (ie-70000-pc-if-c) for ibm pc/at compatibles user?s manual u13731ej3v0um 45 (2) jumper settings the int jp and wait jp are c bus interrupt and wait selection jumpers. in the IE-78K0-NS, set int jp to no use, and wait jp to 1 and 2 shorted. figure d-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp no use shorted irq2 irq3 irq4 irq5 irq6 irq7 (3) installation in pc make sure that the pc is turned off, then install the interface board in the isa bus slot following the instructions in the pc ? s manual. (4) connecting with IE-78K0-NS using the supplied cable, connect the IE-78K0-NS to the ch0 side. caution connection with the IE-78K0-NS is possible on the ch0 side only. for connection with other models, refer to their respective manuals.
user?s manual u13731ej3v0um 46 appendix e revision history a history of the revisions up to this edition is shown below. ?applied to:? indicates the chapters to which the revision was applied. edition major revisions from previous edition applied to: modification of figure 1-1 IE-78K0-NS system configuration modification of figure 1-2 IE-78K0-NS basic hardware configuration 1 addition of 1.4 contents in carton chapter 1 general modification of 3.1 connection chapter 3 installation addition of interface board (ie-70000-pci-if-a) for desktop pc appendix a addition of pc card interface (ie-70000-cd-if-a) appendix b 2nd addition of revision history appendix e change of interface board for desk top pc from ie-70000-pci-if to ie-70000-pci-if-a throughout modification of figure 1-1 IE-78K0-NS system configuration chapter 1 general a.1 introduction ? deletion of applicable models appendix a 3rd b.1 introduction ? deletion of applicable models appendix b
user?s manual u13731ej3v0um 47 [memo]

▲Up To Search▲

Price & Availability of IE-78K0-NS

	To Download IE-78K0-NS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .