View Q67120-D_1904350.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

never stop thinking. microcontrollers data sheet, v1.0, aug. 2001 c167cs-xc, step ba 16-bit single-chip microcontroller bare die delivery
edition 2001-08 published by infineon technologies ag, st.-martin-strasse 53, d-81541 mnchen, germany ? infineon technologies ag 2001. all rights reserved. attention please! the information herein is given to describe certain components and shall not be considered as warranted characteristics. terms of delivery and rights to technical change reserved. we hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. infineon technologies is an approved cecc manufacturer. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office in germany or our infineon technologies representatives worldwide (see address list). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
microcontrollers data sheet, v1.0, aug. 2001 never stop thinking. c167cs-xc, step ba 16-bit single-chip microcontroller bare die delivery
controller area network (can): license of robert bosch gmbh c167cs-xc (bare die delivery) revision history: 2001-08 v1.0 previous version: - page subjects (major changes since last revision) we listen to your comments any information within this document that you feel is wrong, unclear or missing at all? your feedback will help us to continuously improve the quality of this document. please send your proposal (including a reference to this document) to: mcdocu.comments@infineon.com
data sheet 1 v1.0, 2001-08 c167cs-xc 16-bit single-chip microcontroller c166 family c167cs-xc ? high performance 16-bit cpu with 4-stage pipeline ? 80/60 ns instruction cycle time at 25/33 mhz cpu clock ? 400/303 ns multiplication (16 16 bit), 800/606 ns division (32/16 bit) ? enhanced boolean bit manipulation facilities ? additional instructions to support hll and operating systems ? register-based design with multiple variable register banks ? single-cycle context switching support ? 16 mbytes total linear address space for code and data ? 1024 bytes on-chip special function register area 16-priority-level interrupt system with 56 sources, sample-rate down to 40/30 ns 8-channel interrupt-driven single-cycle data transfer facilities via peripheral event controller (pec) clock generation via on-chip pll (factors 1:1.5/2/2.5/3/4/5), via prescaler or via direct clock input on-chip memory modules ? 3 kbytes on-chip internal ram (iram) ? 8 kbytes on-chip extension ram (xram) ? 32 kbytes on-chip program mask rom on-chip peripheral modules ? 24-channel 10-bit a/d converter with programmable conversion time down to 7.8 s ? two 16-channel capture/compare units ? 4-channel pwm unit ? two multi-functional general purpose timer units with 5 timers ? two serial channels (synchronous/asynchronous and high-speed-synchronous) ? two on-chip can interfaces (rev. 2.0b active) with 2 15 message objects (full can/basic can), can work on one bus with 30 objects ? on-chip real time clock up to 16 mbytes external address space for code and data ? programmable external bus characteristics for different address ranges ? multiplexed or demultiplexed external address/data buses with 8-bit or 16-bit data bus width ? five programmable chip-select signals ? hold- and hold-acknowledge bus arbitration support idle, sleep, and power down modes with flexible power management programmable watchdog timer and oscillator watchdog up to 111 general purpose i/o lines, partly with selectable input thresholds and hysteresis
c167cs-xc bare die step ba data sheet 2 v1.0, 2001-08 supported by a large range of development tools like c-compilers, macro-assembler packages, emulators, evaluation boards, hll-debuggers, simulators, logic analyzer disassemblers, programming boards on-chip bootstrap loader this document describes several derivatives of the c167 group. table 1 enumerates these derivatives and summarizes the differences. as this document refers to all of these derivatives, some descriptions may not apply to a specific product. note: the ordering codes for mask-rom versions are defined for each product after verification of the respective rom code. for simplicity all versions are referred to by the term c167cs-xc throughout this document. table 1 c167cs-xc bare die derivative synopsis type ordering code program memory operating temperature wafers sak-c167cs-4rc q67120- d.... 32 kbyte rom -40 to +125 cwhole sak-c167cs-lc q67120- c2200 --- -40 to +125 csawn sal-c167cs-lc 1) 1) the designation sal- conforms to the valid proelectron specification. these devices were named saa- formerly. q67120- c2274 --- -40 to +150 csawn sal-c167cs-l33c 1) q67120- c2275 --- -40 to +150 csawn
c167cs-xc bare die step ba data sheet 3 v1.0, 2001-08 introduction the c167cs-xc derivatives are high performance derivatives of the infineon c166 family of full featured single-chip cmos microcontrollers. they combine high cpu performance (up to 16.5 million instructions per second) with high peripheral functionality and enhanced io-capabilities. they also provide clock generation via pll and various on-chip memory modules such as program rom, internal ram, and extension ram. figure 1 logic symbol mcl04411 xtal1 xtal2 rstout ale nmi rd rstin port 0 16 bit 16 bit port 1 16 bit port 2 15 bit port 3 8 bit port 4 v aref agnd v wr/wrl port 5 16 bit port 6 8 bit ea ready port 7 8 bit 8 bit port 8 dd v ss v c167cs-xc
c167cs-xc bare die step ba data sheet 4 v1.0, 2001-08 pad configuration (top view) figure 2 several pins of port 4 and port 8 can have can interface lines assigned to them. table 2 on the following pages lists the possible assignments. c167cs-xc pad 1 pad 146 y x 0.0 0.0 pad 36 pad 37 pad 73 pad 111 pad 110 pad 74 position of logo and marking
c167cs-xc bare die step ba data sheet 5 v1.0, 2001-08 table 2 pad definitions and functions symbol pad num in / out position [m] function xy aref 1 - 305 0 reference voltage for the a/d converter. agnd 2 - 460 0 reference ground for the a/d converter. p5.10 3 i 615 0 port 5 input, analog input an10, external up/down t6eud. p5.11 4 i 770 0 port 5 input, analog input an11, external up/down t5eud. p5.12 5 i 925 0 port 5 input, analog input an12, timer input t6in. p5.13 6 i 1081 0 port 5 input, analog input an13, timer input t5in. p5.14 7 i 1236 0 port 5 input, analog input an14, external up/down t4eud. p5.15 8 i 1391 0 port 5 input, analog input an15, external up/down t2eud. ss 9 - 1563 0 digital ground. dd 10 - 1688 0 digital supply voltage. p2.0 11 i/o 1960 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc0io. p2.1 12 i/o 2139 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc1io. p2.2 13 i/o 2318 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc2io. p2.3 14 i/o 2497 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc3io. p2.4 15 i/o 2676 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc4io. p2.5 16 i/o 2855 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc5io. p2.6 17 i/o 3034 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc6io. p2.7 18 i/o 3214 0 port 2 input/output (open drain, sp. threshold), capture-input/compare-output cc7io.
c167cs-xc bare die step ba data sheet 6 v1.0, 2001-08 ss 19 - 3393 0 digital ground. dd 20 - 3572 0 digital supply voltage. p2.8 21 i/o 3751 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc8io, fast interrupt ex0in. p2.9 22 i/o 3930 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc9io, fast interrupt ex1in. p2.10 23 i/o 4109 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc10io, fast interrupt ex2in. p2.11 24 i/o 4288 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc11io, fast interrupt ex3in. p2.12 25 i/o 4467 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc12io, fast interrupt ex4in. p2.13 26 i/o 4646 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc13io, fast interrupt ex5in. p2.14 27 i/o 4826 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc14io, fast interrupt ex6in. p2.15 28 i/o 5005 0 port 2 input/output (open drain, sp. threshold), capt. input/comp. output cc15io, fast interrupt ex7in, timer t7 input t7in. p3.0 29 i/o 5184 0 port 3 input/output (open drain, sp. threshold), timer t0 input t0in. p3.1 30 i/o 5363 0 port 3 input/output (open drain, sp. threshold), timer t6 toggle latch output t6out. p3.2 31 i/o 5542 0 port 3 input/output (open drain, sp. threshold), caprel capture input capin. p3.3 32 i/o 5721 0 port 3 input/output (open drain, sp. threshold), timer t3 toggle latch output t3out. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 7 v1.0, 2001-08 p3.4 33 i/o 5900 0 port 3 input/output (open drain, sp. threshold), timer t3 ext.up/down t3eud. p3.5 34 i/o 6079 0 port 3 input/output (open drain, sp. threshold), timer t4 input t4in. ss 35 - 6258 0 digital ground. dd 36 - 6437 0 digital supply voltage. p3.6 37 i/o 6936 498 port 3 input/output (open drain, sp. threshold), timer t3 input t3in. p3.7 38 i/o 6936 695 port 3 input/output (open drain, sp. threshold), timer t2 input t2in. p3.8 39 i/o 6936 892 port 3 input/output (open drain, sp. threshold), ssc master-rec./slave-transmit i/o mrst. p3.9 40 i/o 6936 1090 port 3 input/output (open drain, sp. threshold), ssc master-transmit/slave-rec. o/i mtsr. p3.10 41 i/o 6936 1287 port 3 input/output (open drain, sp. threshold), asc0 clock/data output (asyn./syn.) txd0. p3.11 42 i/o 6936 1484 port 3 input/output (open drain, sp. threshold), asc0 data input (asyn.) or i/o (syn.) rxd0. p3.12 43 i/o 6936 1681 port 3 input/output (open drain, sp. threshold). 44 o 6936 1878 high byte enable bhe , high byte write strobe wrh . p3.13 45 i/o 6936 2075 port 3 input/output (open drain, sp. threshold), ssc master(slave) clock output(input) sclk. p3.15 46 i/o 6936 2272 port 3 input/output (open drain, sp. threshold). 47 o 6936 2469 system clock output (=cpu clock) clkout, programmable frequency output fout. dd 48 - 6936 2666 digital supply voltage. ss 49 - 6936 2837 digital ground. p4.0 50 i/o 6936 2993 port 4 input/output, segment address line a16. p4.1 51 i/o 6936 3149 port 4 input/output, segment address line a17. p4.2 52 i/o 6936 3306 port 4 input/output, segment address line a18. p4.3 53 i/o 6936 3462 port 4 input/output, segment address line a19. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 8 v1.0, 2001-08 p4.4 54 i/o 6936 3618 port 4 input/output, segment address line a20, can2 receive data input can2_rxd. p4.5 55 i/o 6936 3775 port 4 input/output, segment address line a21, can1 receive data input can1_rxd. p4.6 56 i/o 6936 3931 port 4 input/output, segment address line a22 can1 transmit data output can1_txd can2 transmit data output can2_txd. p4.7 57 i/o 6936 4087 port 4 input/output, segment address line a23, can1 receive data input can1_rxd can2 transmit data output can2_txd, can2 receive data input can2_rxd. dd 58 - 6936 4244 digital supply voltage. ss 59 - 6936 4400 digital ground. rd 60 o 6936 4556 external memory read strobe rd . wr (l ) 61 o 6936 4712 external memory write(low) strobe wr (wrl ). ready 62 i 6936 4869 ready input. ale 63 o 6936 5025 address latch enable output. ea 64 i 6936 5181 external access enable pin. p0l.0 65 i/o 6936 5338 port0 input/output, address/data line ad0. p0l.1 66 i/o 6936 5494 port0 input/output, address/data line ad1. p0l.2 67 i/o 6936 5650 port0 input/output, address/data line ad2. p0l.3 68 i/o 6936 5807 port0 input/output, address/data line ad3. p0l.4 69 i/o 6936 5963 port0 input/output, address/data line ad4. p0l.5 70 i/o 6936 6119 port0 input/output, address/data line ad5. p0l.6 71 i/o 6936 6275 port0 input/output, address/data line ad6. p0l.7 72 i/o 6936 6432 port0 input/output, address/data line ad7. p0h.0 73 i/o 6936 6588 port0 input/output, address/data line ad8. dd 74 - 6437 7086 digital supply voltage. ss 75 - 6274 7086 digital ground. p0h.1 76 i/o 6110 7086 port0 input/output, address/data line ad9. p0h.2 77 i/o 5947 7086 port0 input/output, address/data line ad10. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 9 v1.0, 2001-08 p0h.3 78 i/o 5783 7086 port0 input/output, address/data line ad11. p0h.4 79 i/o 5620 7086 port0 input/output, address/data line ad12. p0h.5 80 i/o 5456 7086 port0 input/output, address/data line ad13. p0h.6 81 i/o 5293 7086 port0 input/output, address/data line ad14. p0h.7 82 i/o 5129 7086 port0 input/output, address/data line ad15. p1l.0 83 i/o 4966 7086 port1 input/output, address line a0, analog input an16. p1l.1 84 i/o 4802 7086 port1 input/output, address line a1, analog input an17. p1l.2 85 i/o 4639 7086 port1 input/output, address line a2, analog input an18. p1l.3 86 i/o 4475 7086 port1 input/output, address line a3, analog input an19. p1l.4 87 i/o 4312 7086 port1 input/output, address line a4, analog input an20. p1l.5 88 i/o 4148 7086 port1 input/output, address line a5, analog input an21. p1l.6 89 i/o 3985 7086 port1 input/output, address line a6, analog input an22. p1l.7 90 i/o 3821 7086 port1 input/output, address line a7, analog input an23. dd 91 - 3658 7086 digital supply voltage. c167cs mode 92 i 3494 7086 must be connected to dd . 1) standard oscillator mode, single-chip reset with port0-configuration. ss 93 - 3331 7086 digital ground. p1h.0 94 i/o 3167 7086 port1 input/output, address line a8. p1h.1 95 i/o 3004 7086 port1 input/output, address line a9. p1h.2 96 i/o 2840 7086 port1 input/output, address line a10. p1h.3 97 i/o 2677 7086 port1 input/output, address line a11. p1h.4 98 i/o 2513 7086 port1 input/output, addr. line a12, capt. input/comp. output cc24. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 10 v1.0, 2001-08 p1h.5 99 i/o 2350 7086 port1 input/output, addr. line a13, capt. input/comp. output cc25. p1h.6 100 i/o 2186 7086 port1 input/output, addr. line a14, capt. input/comp. output cc26. p1h.7 101 i/o 2023 7086 port1 input/output, addr. line a15, capt. input/comp. output cc27. dd 102 - 1859 7086 digital supply voltage. xtal2 103 o 1708 7086 output of the oscillator amplifier circuit. xtal1 104 i 1479 7086 input to oscillator amplifier and internal clock generator. ss 105 - 1316 7086 digital ground. rstin 106 i/o 1152 7086 reset input with schmitt-trigger characteristics, output in bidirectional reset mode. rst out 107 o 989 7086 internal reset indication output. nmi 108 i 825 7086 non-maskable interrupt input. ss 109 - 662 7086 digital ground. dd 110 - 498 7086 digital supply voltage. p6.0 111 i/o 0 6588 port 6 input/output, chip select 0 output cs0 . p6.1 112 i/o 0 6404 port 6 input/output, chip select 1 output cs1 . p6.2 113 i/o 0 6220 port 6 input/output, chip select 2 output cs2 . p6.3 114 i/o 0 6036 port 6 input/output, chip select 3 output cs3 . p6.4 115 i/o 0 5852 port 6 input/output, chip select 4 output cs4 . p6.5 116 i/o 0 5668 port 6 input/output, external hold request input hold . p6.6 117 i/o 0 5485 port 6 input/output, external hold acknowledge output hlda . p6.7 118 i/o 0 5301 port 6 input/output, bus request output breq . p8.0 119 i/o 0 5117 port 8 input/output, capt.-input/comp.-output cc16io, can1 receive data input can1_rxd, can2 receive data input can2_rxd. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 11 v1.0, 2001-08 p8.1 120 i/o 0 4933 port 8 input/output, capt.-input/comp.-output cc17io, can1 transmit data output can1_txd, can2 transmit data output can2_txd. p8.2 121 i/o 0 4749 port 8 input/output, capt.-input/comp.-output cc18io, can1 receive data input can1_rxd, can2 receive data input can2_rxd. p8.3 122 i/o 0 4565 port 8 input/output, capt.-input/comp.-output cc19io, can1 transmit data output can1_txd, can2 transmit data output can2_txd. p8.4 123 i/o 0 4381 port 8 input/output, capt.-input/comp.-output cc20io. p8.5 124 i/o 0 4197 port 8 input/output, capt.-input/comp.-output cc21io. p8.6 125 i/o 0 4013 port 8 input/output, capt.-input/comp.-output cc22io. p8.7 126 i/o 0 3829 port 8 input/output, capt.-input/comp.-output cc23io. dd 127 - 0 3646 digital supply voltage. ss 128 - 0 3462 digital ground. p7.0 129 i/o 0 3278 port 7 input/output, (open drain, sp. threshold), pwm channel output pout0. p7.1 130 i/o 0 3094 port 7 input/output, (open drain, sp. threshold), pwm channel output pout1. p7.2 131 i/o 0 2910 port 7 input/output, (open drain, sp. threshold), pwm channel output pout2. p7.3 132 i/o 0 2726 port 7 input/output, (open drain, sp. threshold), pwm channel output pout3. p7.4 133 i/o 0 2542 port 7 input/output, (open drain, sp. threshold), capt.-input/comp.-output cc28io. p7.5 134 i/o 0 2358 port 7 input/output, (open drain, sp. threshold), capt.-input/comp.-output cc29io. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 12 v1.0, 2001-08 note: all ss pads and all dd pads must be connected to the system ground and the power supply, respectively. the pad definitions and locations in this table are only valid for the indicated device and design step. p7.6 135 i/o 0 2174 port 7 input/output, (open drain, sp. threshold), capt.-input/comp.-output cc30io. p7.7 136 i/o 0 1990 port 7 input/output, (open drain, sp. threshold), capt.-input/comp.-output cc31io. p5.0 137 i 0 1701 port 5 input, analog input an0. p5.1 138 i 0 1546 port 5 input, analog input an1. p5.2 139 i 0 1391 port 5 input, analog input an2. p5.3 140 i 0 1236 port 5 input, analog input an3. p5.4 141 i 0 1081 port 5 input, analog input an4. p5.5 142 i 0 925 port 5 input, analog input an5. p5.6 143 i 0 770 port 5 input, analog input an6. p5.7 144 i 0 615 port 5 input, analog input an7. p5.8 145 i 0 460 port 5 input, analog input an8. p5.9 146 i 0 305 port 5 input, analog input an9. 1) prepared to enable enhanced mode, i.e. low-power oscillator mode, single-chip reset with rd /ale- configuration. table 2 pad definitions and functions (cont ? d) symbol pad num in / out position [m] function xy
c167cs-xc bare die step ba data sheet 13 v1.0, 2001-08 handling of unconnected pads signal input stages may generate undesired switching noise and cross-current when left open. respect the following precautions for unconnected (not bonded) pads: table 3 precautions for unconnected pads pad type recommended action related pads power supply always connect! dd , ss , aref , agnd standard io pads switch to output port0, port1 1) , p2, p3, p4, p6, p7, p8 1) the lower part of port1 (p1l) may be left open and its input stages can then be disabled via p1didis. input port pads disable input stages via p5didis p5 double-bond ports connect port pad (43, 46), if the alternate output (44, 47) is used. 2) 2) port pad is input in this case! if the port pad is used, the corresponding alternate output pad may be left open. p3.12 (43/44), p3.15 (46/47) configuration lines always connect! ea , c167csmode, rd 3) 3) pin rd can be used for configuration to disable the owd. otherwise it is held high by an internal pullup. required control lines always connect! xtal1, rstin , nmi optional control lines can be left open rd 3) , wr (l ), ready , ale, rstout
c167cs-xc bare die step ba data sheet 14 v1.0, 2001-08 functional description as the standard packaged devices are made from this silicon the c167cs-xc dies provide exactly the same functionality and behaviour. also the dc characteristics and ac characteristics are compatible with those of the packaged devices. for a description of the functionality and the dc and ac parameters please refer to the following documents (or later versions thereof): c167cs-4r/-l data sheet, version 2.2, 2001-08 c167cs derivatives user ? s manual, version 2.0, 2000-07 figure 3 block diagram c166-core cpu port 2 interrupt bus xtal osc / pll rtc wdt 32 16 interrupt controller 16-level priority pec external instr. / data gpt t2 t3 t4 t5 t6 ssc brgen (spi) asc0 brgen (usart) adc 10-bit 16+8 channels pwm ccom1 t0 t1 ccom2 t7 t8 ebc xbus control external bus control iram dual port internal ram 3 kbyte progmem rom 32 kbyte data data 16 16 16 can1 rev 2.0b active instr. / data port 0 xram 6+2 kbyte port 6 8 8 port 1 16 16 16 port 5 port 3 15 port 7 8 port 8 8 port 4 16 peripheral data bus 16 can2 rev 2.0b active on-chip xbus (16-bit demux) mcb04323_7cs
c167cs-xc bare die step ba data sheet 15 v1.0, 2001-08 absolute maximum ratings note: stresses above those listed under ?absolute maximum ratings? may cause permanent damage to the device. this is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. during absolute maximum rating overload conditions ( in > dd or in < ss ) the voltage on dd pins with respect to ground ( ss ) must not exceed the values defined by the absolute maximum ratings. storage conditions the c167cs-xc dies may be stored for a certain time under the conditions described below. table 4 absolute maximum rating parameters parameter symbol limit values unit notes min. max. storage temperature st -65 150 c junction temperature j -40 150 c under bias voltage on dd pins with respect to ground ( ss ) dd -0.5 6.5 v voltage on any pin with respect to ground ( ss ) in -0.5 dd + 0.5 v input current on any pin during overload condition -10 10 ma absolute sum of all input currents during overload condition - |100| ma table 5 bare die storage conditions and duration packing environment temperature rel. humidity storage time vacuum pack air 15 30 c < 60 % < 4 months
c167cs-xc bare die step ba data sheet 16 v1.0, 2001-08 operating conditions the following operating conditions must not be exceeded in order to ensure correct operation of the c167cs-xc. all parameters specified in the following sections refer to these operating conditions, unless otherwise noticed. table 6 operating condition parameters parameter symbol limit values unit notes min. max. digital supply voltage dd 4.5 5.5 v active mode, cpumax = 33 mhz 2.5 1) 1) output voltages and output currents will be reduced when dd leaves the range defined for active mode. 5.5 v powerdown mode digital ground voltage ss 0 v reference voltage overload current ov - 5 ma per pin 2) 3) 2) overload conditions occur if the standard operatings conditions are exceeded, i.e. the voltage on any pin exceeds the specified range (i.e. ov dd +0.5v or ov ss -0.5v). the absolute sum of input overload currents on all pins may not exceed 50 ma . the supply voltage must remain within the specified limits. proper operation is not guaranteed if overload conditions occur on functional pins such as xtal1, rd , wr , etc. 3) not 100% tested, guaranteed by design and characterization. absolute sum of overload currents | ov |- 50 ma 3) external load capacitance l - 50 pf pin drivers in fast edge mode 4) 4) the timing is valid for pin drivers in high current or dynamic current mode. the reduced static output current in dynamic current mode must be respected when designing the system. temperature of the bottom side of the die d -40 150 c sal-c167cs-xc... -40 125 c sak-c167cs-xc...
c167cs-xc bare die step ba data sheet 17 v1.0, 2001-08 chip outline figure 4 0.38 7.44 7.29 dimensions in mm 0.090 0.090 0.125 x y 0,0 min typical
c167cs-xc bare die step ba data sheet 18 v1.0, 2001-08 the wafers are glued to a plastic tape which is fixed within a plastic ring (see figure 5 ). wafers can be shipped in one piece or sawn into individual dies. note: please refer also to the document " bare die packing information ". table 7 wafer characteristics item characteristic chips per wafer 262 (geometrically) metallization layers 2 metallization material alcu metallization thickness met1: 450 nm, met2: 800 nm metallization barrier material ti metallization isolation sog-cmp metallization material on pads alsicu (al 98.5% - si 1% - cu 0.5%) passivation oxide (300 nm) + nitride (500 nm) backside metallization 1) 1) the backside of the chip can either be left unconnected or must be connected to v ss . none (silicon) inkdot diameter 1.0 - 1.3 typical
c167cs-xc bare die step ba data sheet 19 v1.0, 2001-08 wafer outline figure 5 152.4 (6 ? ) dimensions in mm 210 230 plastic frame plastic tape wafer
http://www.infineon.com published by infineon technologies ag infineon goes for business excellence ? business excellence means intelligent approaches and clearly defined processes, which are both constantly under review and ultimately lead to good operating results. better operating results and business excellence mean less idleness and wastefulness for all of us, more professional success, more accurate information, a better overview and, thereby, less frustration and more satisfaction. ? dr. ulrich schumacher

▲Up To Search▲

Price & Availability of Q67120-D

	To Download Q67120-D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .