View LTM240CS02_1863691.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- samsung tft-lcd pr oduct information model : LTM240CS02 samsung tft samsung tft - - lcd product information lcd product information model model : LTM240CS02 : LTM240CS02 issued date : 2007-05-09 development team 4, lcd business samsung electronics co . , ltd. note : this is product information is subject to change after 3 months of issuing date. www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- contents general description ----------- --------------- --------------- --------------- --------------- ---------- (3) 1. absolute maximum rati ngs --------------- --------------- --------------- --------------- ------- (4) 2. optical characteristics ---------------------- --------------- --------------- --------------- -------- (6) 3. electrical characterist ics ------------------ --------------- --------------- --------------- ------- (12) 3.1 tft lcd module 3.2 back light unit 4. block diagram ------------ ------------------ --------------- --------------- --------------- -------- (16) 4.1 tft lcd module 4.2 back light unit 5. input terminal pin assignment ---------- --------------- --------------- --------------- ------- (17) 5.1 input signal & power 5.2 lvds interface(1) 5.3 lvds interface(2) 5.4 input signals, basic display colo rs and gray scale of each color 6. interface timing ---------- ------------------ --------------- --------------- --------------- -------- (27) 6.1 timing parameters (de only mode) 6.2 timing diagrams of interface signal (de only mode) 6.3 power on/off sequence 6.4 vdd power dip condition 7. outline dimension ---------- --------------- --------------- --------------- --------------- --------- (31) 8. general precaution ------- ------------------ --------------- --------------- --------------- -------- (33) 8.1 handling 8.2 storage 8.3 operation 8.4 others www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- LTM240CS02 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft(thin film transistor) as switch ing components. this model is composed of a tft lcd panel, a driver circui t and a back light un it. the resolution of a 24? is 1920 x 1200 and this model can displa y up to 16.7 millions colors. ? workstation & desktop monitors ? display terminals for av application products ? monitors for industrial machine * if the module is used to ot her applications besides t he above, please contact sec in advance. features general description description applications general information ? high contrast ratio, high aperture structure ? spva (super patterned vert ical alignment) mode ? wide viewing angle ? high speed response ? wuxga (1920 x 1200 pixels) resolution ? led backlight ? de (data enable) only mode ? lvds (low voltage differential si gnaling) interface (2pixel/clock) mm 0.270(h) x 0.270(w) pixel pitch mm 518.4(h) x 324.0(v) active display area note haze 44% , hard-coating (3h) surface treatment cd/ ] (250)(typ.) luminance of white normally black display mode rgb vertical stripe pixel arrangement pixel 1920 x 1200 number of pixels colors 16.7m (true 8-bit) display colors unit specification items www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (1) mechanical tolerance is ? 0.5mm unless there is a special comment. mechanical information 4,800 53.2 352.5 546.9 max. g weight mm depth (d) mm 352.0 351.5 vertical (v) with converter ass?y mm 546.4 545.9 horizontal (h) module size note unit typ. min. item 1. absolute maximum ratings if the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device. note (1) ta= 25 ? 2 ? c (1) v 6.5 gnd-0.5 v dd power supply voltage (4) g 1.5 - v nop vibration ( non - operating ) (3) g 50 - s nop shock ( non - operating ) ? 50 0 t opr glass surface temperature (operation temperature) (2) ? 60 -20 t stg storage temperature note unit max. min. symbol item www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- fig. temperature and relative humidity range (2) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. maximum wet-bulb temperature at 39 ? c or less. (ta ? 39 ? c) c. no condensation (3) 11ms, sine wave, one time for ? x, ? y, ? z axis (4) 10-300 hz, sweep rate 10min, 30min for x,y,z axis www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 2. optical characteristics * c.g.l : color grayscale linearity (continue to the next page) the optical characteristics should be me asured in a dark room or equivalent. measuring equipment : topcon rd-80s,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd=5v, fv= 60hz, fdclk=77mhz) bm-7 msec - 8 - t g-g,long sr-3 (7),(8) (6) sr-3 cd/m2 - - (250) y l luminance of white (center of screen) g-to-g bm-7 msec - 6 - t g-g,avg (5) bm-7 20 16 - tr+tf on/off response time msec normal ? l,r =0 ? u,d =0 viewing angle (9) 0.02 - - ? u'v' white c.g.l - 0.468 - wv' - 0.198 - wu' white - 0.168 - bv' - 0.170 - bu' blue - 0.576 - gv' - 0.073 - gu' green - 0.515 - rv' - 0.537 - ru' red color chromaticity (cie 1976) - 0.329 - wy - 0.313 - wx white - 0.065 - by - 0.148 - bx blue - 0.717 - gy - 0.205 - gx green - 0.295 - ry - 0.692 - rx red color chromaticity (cie 1931) (3) sr-3 - 1000 - c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- (4) sr-3 % (25) - - b uni brightness uniformity (9 points) k - 6500 - - color temperature % - 111 - - color gamut note unit max. typ. min. condition symbol item - 89 80 ? d - 89 80 ? u ver. - 89 80 ? r (8) ez- contrast degrees - 89 80 cr ? 10 ? l hor. viewing angle note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. this should be measured in the center of screen. environment condition : ta = 25 ? 2 ? c 2 ? sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 40 y rd-80s : 50 y field www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (2) definition of test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point ? of the panel note (4) definition of 9 points brightness uniformity buni bb b = ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black 6 8 7 9 3 2 1 4 5 192 960 1728 120 600 1080 active area : test point www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (5) definition of response time a. on/off response time : sum of tr, tf black (tft off) whit e (tft on) black (tft off) 100% 90% 10% 0% t r t f optical response display data time b. gray to gray response time - measuring gray : 31 ? 63, 63 ? 95,95 ? 127, 127 ? 159, 159 ? 191, 191 ? 223 grays and vice versa -t g-g, avg : average response time of ones between above grays -t g-g, long : the longest response time of ones between above grays 96 gray 128 gray 95 gray 127 gray gray to gray response black 0% 100% 10% 90% t r t f white (example) www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (6) definition of luminance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931, cie1976) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (cr ? 10) www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (9) color grayscale linearity a. test image : 100% full white pattern with a test pattern as below b. test pattern : squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and 105 grays steps should be arranged at the center of the screen. c. test method -1 st gray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u? and v? coordinates. - next gray step : move a 225 gray square into the center and measure both luminance and coordinates, too. d. test evaluation where a, b : 2 gray levels found to have the largest color differences between them i.e. get the largest u? and v? of each 6 pair of u? and v? and calculate the u?v?. ? u' v' = (u' - u' ) + (v' - v' ) ab 2 ab 2 www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 3. electrical characteristics 3.1 tft lcd module the connector for display data & t iming signal shoul d be connected. ta = 25 ? c note (1) the ripple voltage shou ld be controlled under 10% of v dd . common mode voltage input voltage range (single-ended) differential input voltage lvds skew differential input voltage for lvds receiver threshold (4) v 2.4 0 v in (4) v 2.4- |v id |/2 1.2 0+ |v id |/2 v cm (4) mv 600 200 |v id | (3) 300 -300 t skew (7) a 5.0 - - i rush rush current mhz 81 77 72 f dclk main frequency khz 78.5 74 69 f h hsync frequency hz 63 60 57 f v vsync frequency ma - 2400 - (c) 1 dot ma - 2200 - (b) white (5),(6) ma - 1700 - i dd (a) black current of power supply mv - - -100 low (2) mv +100 - - high lvds input characteri stics (1) v 5.5 5.0 4.5 v dd voltage of power supply note unit max. typ. min. symbol item www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- (2) differential receiver voltage definitions and propagation delay and transition time test circuit a. all input pulses have frequency = 10mhz, t r or t f =1ns b. c l includes all probe and fixture capacitance note a. note b. (4) definition of v id and v cm using single-end signals (3) lvds receiver dc parameters are measured under static and steady conditions which may not be reflective of its performance in the end application. where tskew : skew between lvds clock & lvds data, t : 1 period time of lvds clock cf) (-/+) of 340psec means lvds data goes before or after lvds clock. differential lvds data rx +/- t skew t v diff = 0v v diff = 0v differential lvds clk www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- (5) fv=60hz, fdclk = 77mhz, vdd = 5v, dc current. (6) power dissipation check pattern (lcd module only) rush current i rush can be measured when t rush . is 470 k . t rush =470 k 100% gnd 90% 10% v dd (7) measurement condition a) black pattern b) white pattern c) 1 dot pattern ( 3 # ( 3 ( 3 # 3 # # ( ( 3 # ( 3 # www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 3.2 back light unit the back light unit is composed of led. the characteristics of converter are shown in the following tables. ta=25 ? 2 ? c 2.5 - -2.5 2.5 - -2.5 - - tbd - tbd - * # * #
* # * ( * (
* ( v r1,2,3,4 v r1,2,3,4 (2) vmean tbd - - vin=24[v], dpwm=100% v r1,2,3,4 output voltage % 2.5 - -2.5 * 3 * 3
* 3 channel unbalance hz - 725 - f pwm1,2 pwm frequency - 310 - f ob - 310 - f og khz - 310 - vin=24[v], dpwm=100% f or operating frequency vin=21.6~26.4v vin=24[v], dpwm=100% condition note unit symbol item - 120 - i r1,2 - 100 - i g1,2 msec 100 - - 5t shutdown time (1) marms - 50 - i b1,2 output current (ix1 = phase1 ix2 = phase2) max. typ. min. www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note (1) measured cold wire, cath ode connection of led strings (2) it is determined by forward voltage rank of led strings ? all data was approved after running 120 minutes with lcm ? current probe : tcp202 (tektronix) ? voltage probe : p6139a (tektronix) www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 4. block diagram 4.2 back light unit 4.1 tft lcd module power circuit gate driver circuit column driver circuit tft-lcd (1920 x rgb x 1200 pixels) g1 s1 s1920 g1200 timing controller source driver circuit cpv lvds (rx) rsds(tx) oe stv sth tp data rev cn1 (30pin) lvds pair #1 lvds pair #2 +5.0v v dd www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5. input terminal pin assignment 5.1.1 input signal & power ( connector : uju is100-l30o-c23 or equivalent ) negative lvds differential data output positive lvds differential data output vdd 30 vdd 29 vdd 28 power supply : +5v vdd 27 * ctl (for lcd internal use only. do not connect) nc 26 * ce (for lcd internal use only. do not connect) nc 25 ground gnd 24 positive lvds differential data output rxe3p 23 negative lvds differential data output rxe3n 22 positive sampling clock (even data) rxec+ 21 negative sampling clock (even data) rxec- 20 positive lvds differential data output rxe2p 19 negative lvds differential data output rxe2n 18 ground gnd 17 positive lvds differential data output rxe1p 16 negative lvds differential data output rxe1n 15 ground gnd 14 positive lvds differential data output rxe0p 13 negative lvds differential data output rxe0n 12 positive lvds differential data output rxo3p 11 negative lvds differential data output rxo3n 10 positive sampling clock (odd data) rxoc+ 9 negative sampling clock (odd data) rxoc- 8 ground gnd 7 positive lvds differential data output rxo2p 6 negative lvds differential data output rxo2n 5 positive lvds differential data output rxo1p 4 rxo1n 3 rxo0p 2 negative lvds differential data output rxo0n 1 function symbol pin no * if the system already uses the 25, 26pins, it should keep under gnd level the voltage applied to those pins should not exceed -200mv. www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- note) pin number starts from right side a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all nc pins should be separated from other signal or power. fig. connector diagram #1 #30 pin no. 1 pin no. 30 control pcb ? #1 #30 ? www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.1.2 led drive converter input connector : jst 4#1)"4.5# or equivalent /$ 14 /$ 13 &/" 0o_7 0gg_7
12 /$ 11 (/% 10 (/% 9 (/% 8 (/% 7 (/% 6 %$7 5 %$7 4 %$7 3 %$7 2 %$7 1 4jhobm no 5.1.3 led drive converte r i2c pin configuration connector : jst 4#1)"4.5# or equivalent /$ 4 4$- 3 4%" 2 7ee 5zq 7ed
1 4jhobm no www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.1.4 led drive converter flow and i2c command chart when the program start, the microcontroller reads a set of calibration data from eeprom to ram. the command can control the color space and brightness using the i2c command chart. www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.2 lvds interface(1) 5.2.1 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data ro6 txin27 50 blue odd pixel data bo5 txin22 24 blue odd pixel data bo4 txin21 23 blue odd pixel data bo3 txin20 22 rxo2- rxo2+ no. 5 no. 6 txout2- txout2+ blue odd pixel data bo2 txin19 20 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ blue odd pixel data bo1 txin18 19 blue odd pixel data (msb) bo7 txin17 18 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ blue odd pixel data bo6 txin16 16 blue odd pixel data (lsb) bo0 txin15 15 green odd pixel data go5 txin14 14 green odd pixel data go4 txin13 12 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go3 txin12 11 green odd pixel data (msb) go7 txin11 10 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ green odd pixel data go6 txin10 8 green odd pixel data go2 txin9 7 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go1 txin8 6 green odd pixel data (lsb) go0 txin7 4 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data ro5 txin6 3 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data (msb) ro7 txin5 2 red odd pixel data ro4 txin4 56 red odd pixel data ro3 txin3 55 red odd pixel data ro2 txin2 54 red odd pixel data ro1 txin1 52 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data (lsb) ro0 txin0 51 symbol terminal function symbol symbol no to LTM240CS02 interface ( cn1 ) output signal device input signal device input pin 1st lvds transmitter ( ds90c383, ds90c385 ) signal interface www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.2.2 even pixel da ta (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data re6 txin27 50 blue even pixel data be5 txin22 24 blue even pixel data be4 txin21 23 blue even pixel data be3 txin20 22 rxe2- rxe2+ no. 18 no. 19 txout2- txout2+ blue even pixel data be2 txin19 20 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ blue even pixel data be1 txin18 19 blue even pixel data (msb) be7 txin17 18 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ blue even pixel data be6 txin16 16 blue even pixel data (lsb) be0 txin15 15 green even pixel data ge5 txin14 14 green even pixel data ge4 txin13 12 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge3 txin12 11 green even pixel data (msb) ge7 txin11 10 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ green even pixel data ge6 txin10 8 green even pixel data ge2 txin9 7 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge1 txin8 6 green even pixel data (lsb) ge0 txin7 4 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data re5 txin6 3 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data (msb) re7 txin5 2 red even pixel data re4 txin4 56 red even pixel data re3 txin3 55 red even pixel data re2 txin2 54 red even pixel data re1 txin1 52 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data (lsb) re0 txin0 51 symbol terminal function symbol symbol no to LTM240CS02 interface ( cn1 ) output signal device input signal device input pin 2nd lvds transmitter ( ds90c383, ds90c385 ) signal interface www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.3 lvds interface(2) 5.3.1 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data ro6 r16 4 blue odd pixel data bo5 b15 87 blue odd pixel data bo4 b14 88 blue odd pixel data bo3 b13 89 rxo2- rxo2+ no. 5 no. 6 a2m a2p blue odd pixel data bo2 b12 90 rxo1- rxo1+ no. 3 no. 4 a1m a1p blue odd pixel data bo1 b11 91 blue odd pixel data (msb) bo7 b17 85 rxo3- rxo3+ no. 10 no. 11 a3m a3p blue odd pixel data bo6 b16 86 blue odd pixel data (lsb) bo0 b10 92 green odd pixel data go5 g15 95 green odd pixel data go4 g14 96 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go3 g13 99 green odd pixel data (msb) go7 g17 93 rxo3- rxo3+ no. 10 no. 11 a3m a3p green odd pixel data go6 g16 94 green odd pixel data go2 g12 100 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go1 g11 1 green odd pixel data (lsb) go0 g10 2 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data ro5 r15 5 rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data (msb) ro7 r17 3 red odd pixel data ro4 r14 6 red odd pixel data ro3 r13 7 red odd pixel data ro2 r12 8 red odd pixel data ro1 r11 9 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data (lsb) ro0 r10 10 symbol terminal function symbol symbol no to LTM240CS02 interface ( cn1 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.3.2 even pixel da ta (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data re6 r26 76 blue even pixel data be5 b25 59 blue even pixel data be4 b24 60 blue even pixel data be3 b23 61 rxe2- rxe2+ no. 18 no. 19 a6m a6p blue even pixel data be2 b22 62 rxe1- rxe1+ no. 15 no. 16 a5m a5p blue even pixel data be1 b21 63 blue even pixel data (msb) be7 b27 57 rxe3- rxe3+ no. 22 no. 23 a7m a7p blue even pixel data be6 b26 58 blue even pixel data (lsb) be0 b20 64 green even pixel data ge5 g25 69 green even pixel data ge4 g24 70 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge3 g23 71 green even pixel data (msb) ge7 g27 65 rxe3- rxe3+ no. 22 no. 23 a7m a7p green even pixel data ge6 g26 66 green even pixel data ge2 g22 72 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge1 g21 73 green even pixel data (lsb) ge0 g20 74 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data re5 r25 77 rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data (msb) re7 r27 75 red even pixel data re4 r24 78 red even pixel data re3 r23 79 red even pixel data re2 r22 80 red even pixel data re1 r21 81 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data (lsb) re0 r20 84 symbol terminal function symbol symbol no to LTM240CS02 interface ( cn1 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.3.3 timing diagrams of lvds for transmitting lvds receiver : integrated t-con www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 5.4 input signals, basic display colo rs and gray scale of each color note (1) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level voltage, 1 = high level voltage b255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b254 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b253 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g254 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of gree n r255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magent a - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colo r b7 b6 b5 b4 b3 b2 b1 b0 g 7 g6 g 5 g 4 g3 g 2 g 1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) colo r www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 6. interface timing 6.1 timing parameters ( de only mode ) - clocks 1075 1040 993 t h horizontal total - clocks 960 960 960 t hd active display period horizontal display term - lines 1245 1235 1209 t vb vertical total - lines 1200 1200 1200 t vd active display period vertical display term - hz 63 60 57 f v vsync - khz 78.5 74 69 f h hsync - mhz 81.0 77.0 72.0 1/t c frequency clock note unit max. typ. min. symbol item signal note (1) this product is de only mode . the input of hsync & vsync signal does not have an effect on normal operation. (2) test point : ttl control signal a nd clk at lvds tx input terminal in system (3) internal vcc = 3.3v www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 6.2 timing diagrams of interfac e signal ( de only mode ) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 6.3 power on/off sequence to prevent a latch-up or dc operatio n of the lcd module, the power on/off sequence should be as the diagram below. ? the supply voltage of the external system for the module input should be the same as the definition of v dd . ? apply the lamp voltage within the lcd operation range. when the back light turns on before the lcd operation or the lcd turns off before the back light turns off, the display may momentarily show abnormal screen. ? in case of v dd = off level, please keep the level of input signals low or keep a high impedance. ? t4 should be measured after the module has been fully discharged between power off and on period. ? interface signal should not be kept at high impedance when the power is on. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid data to b/l enable at power on. t6 : the time from valid data off to b/l disable at power off. 300 k? t1 ? 10msec 0 ? t2 ? 50msec 0 ? t3 ? 50msec 500msec ? t4 back-light (recommended) 500msec ? t5 100msec ? t6 www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 6.4 vdd power dip condition note (1) the above conditions are for the glitch of the input voltage. (2) for stable operation of an lcd module power, please follow them. i.e., if typ vdd x 80% ? vcc ? typ vdd x 90%, then t d should be less than 20ms. t d v cc v dd gnd 90% 80% 4.5v ? v dd ? 5.5v if v dd (typ.) x 80% ? v cc ? v dd (typ) x 90% then, 0

product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 7. outline dimension [ refer to th e next page ] www..net www..net
www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- (a) when the module is assembled, it should be attached to the system firmly using all mounting holes. be carefu l not to twist and bend the module. (b) because the converter uses high voltages, it should be disconnected from power source before it is assembled or disassembled. (c) refrain from strong mechanical shock and / or any force to the module. in addition to damage, it may cause improp er operation or da mage to the module and led. (d) note that polarizer films are very fragile and could be damaged easily. do not press or scratch the surf ace harder than a hb pencil lead. (e) wipe off water droplets or oil immedi ately. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorben t cotton or soft cloth. (g) desirable cleaners are water, ipa (isopropy l alcohol) or hexane. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might cause permanent damage to the polarizer due to chemical reaction. (h) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . in case of contact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep displa y clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the module should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. 8. general precautions 8.1 handling www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 8.2 storage (a) do not leave the mo dule in high temperature, and hi gh humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunlight. (c) the module should be stored in a dark plac e. it is prohibited to apply sunlight or fluorescent light in storing. 8.3 operation (a) do not connect or disconnect t he module in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequ ency circuits. sufficient suppr ession to the electromagnetic interference should be done by system ma nufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back light connector and its converter power supply should be connected directly with a minimize d length. a longer cable between the back light and the converter may cause lower luminance of led. 8.4 operation condition guide (a) the lcd product should be oper ated under norm al conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 65 ? 20% - display pattern : continually ch anging pattern (not stationary) (b) if the product will be used in extreme conditions su ch as high temperature, humidity, display patterns or operation time etc.., it is strongly recommended to contact sec for application engineer ing advice. otherwise, its reliability and function may not be guarant eed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www..net www..net
product information product information 1bhf 1*-5.$4 %pd/p -5.$4 .0%&- 8.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may result in improper operat ion or disconnection of electrode. (c) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and envir onmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps displaying the sa me pattern for a long period of time, the image may be "sti cked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pcb's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. www..net www..net

▲Up To Search▲

Price & Availability of LTM240CS02

	To Download LTM240CS02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .