a d2c111-l 1 form a solid state rela y the AD2C111-L is a bi-directional, single-pole, single-throw, no rmally open multipurpose solid-state relay. it is designed to r eplace electromechanical relays in general purpose switching applications. the relay consists of ir led optically coupled to a ic that drives two rugged source-to-source enhancement type dmos transistors. the 4 pin dip package offers the combination of reduced package size , with 5kv input to output isolation. this device also includes over-current circuitry that protects the device from high load cu rrents and transient spikes by limiting the amount of current that can pass through its output. description features applications options/suffixes* schematic diagram absolute maximum ratings* approvals small 4 pin dip package outline - reduces board space ? current limiting - protects device from overcurrents ? high input-output isolation (5kv) ? low input control power consumption (2.5ma typ) ? 120ma maximum continuous load current ? 40 ohms maximum on-resistance ? long life/high reliability ? reed relay replacement ? meter reading systems ? medical equipment ? battery monitoring ? multiplexers ? vde 0884 compliance (.0 4" / 10.16mm lea d spacing) ? -v surface mount leadfo rm option (65pcs per tube) ? -s tape & reel option (2,000 pcs / reel) ? -tr note: suffixes listed above are not included in marking on device for part number identification. parameter unit min typ max storage temperature c -40 150 operating temperature c -40 85 continuous forward current ma 50 peak forward current a 1 reverse voltage v 5 output power dissipation mw 500 *the values indicated are absolute stres s ratings. functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. exposure to absolute ratings may cause permanent damage to the device and may adversely affect reliability. i c + input - input load load 3 4 2 1 ul / c-ul approved: file e90096 ? www.ssousa.com ? +1.408.293.4600 page 1 of 5 AD2C111-L rev 1.40 (03/31/2008) ? 2008 solid state optronics ? san jos, ca with current limiting
a d2c111-l 1 form a solid state rela y electrical characteristics - 25 c parameter unit min typ max test conditions input specifications led forward voltage v 1.2 1.5 if = 10ma led reverse voltage v 612 ir = 10ua turn-on current m 2.5 5 io = 120ma a turn-off current m 0.5 a output specifications blocking voltage v 400 io = 1ua continuous load current m 120 if = 5ma a current limit m 150 180 if = 5ma a on-resistance : 30 40 io = 120ma leakage current 0.2 1 vo = 400v a output capacitance p 25 50 vo = 25v, f = 1.0mhz a offset voltage m 0.2 if = 5ma v coupled specifications isolation voltage v 5000 t = 1 minute turn-on time m 1.25 3 if = 5ma, io = 120ma s turn-off time m 0.1 0.5 if = 0, io = 120ma s coupled capacitance p 3 f contact transient ratio v 2000 7000 dv = 50v /s www.ssousa.com ? +1.408.293.4600 page 2 of 5 AD2C111-L rev 1.40 (03/31/2008) ? 2008 solid state optronics ? san jos, ca wit h current limit ing
a d2c111-l 1 form a solid state rela y performance data 0 10 20 30 40 0.01 0.02 0.02 0.03 0.03 0.04 0.04 0.05 turn-off time (ms) device count AD2C111-L typical turn-off time distribution n = 100, ambient temperature = 25c 0 10 20 30 40 50 24 25 26 27 28 29 30 31 on-resistance (ohms) device count AD2C111-L 0 10 20 30 40 50 60 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 leakage current (ua) device count typical on-resistance distribution n = 100, ambient temperature = 25c AD2C111-L typical leakage current distribution n = 100, ambient temperature = 25c 0 10 20 30 40 50 400 420 440 460 480 500 520 blocking voltage (v) device count AD2C111-L 0 50 100 150 -40 -20 0 20 40 60 80 temperature (c) load current (ma) typical blocking voltage distribution n = 100, ambient temperature = 25c AD2C111-L maximum load current vs. temperature 0 10 20 30 40 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 turn-on time (ms) device count AD2C111-L typical turn-on time distribution n = 100, ambient temperature = 25c www.ssousa.com ? +1.408.293.4600 page 3 of 5 AD2C111-L rev 1.40 ( 03/31/2008) ? 2008 solid state optronics ? san jos, ca wit h current limit ing
a d2c111-l 1 form a solid state rela y mechanical dimensions 4 pin dual in-line package 4 pin surface mount device end view end view top view top view bottom view bottom view www.ssousa.com ? +1.408.293.4600 page 4 of 5 AD2C111-L rev 1.40 (03/31/2008) ? 2008 solid state optronics ? san jos, ca wit h current limit ing
a d2c111-l 1 form a solid state rela y solid state optronics (sso) makes no warranties or representations wi th regards to the completeness and accuracy of this docume nt. sso reserves the right to make changes to product description, specifications at any time without further notice. sso shall not assume any liability arisi ng out of the application or use of any product or circuit described herein. neither ci rcuit patent licenses nor indemnity are expressed or implied. except as specified in sso's standard t erms & conditions, sso disclaims liability for consequential or other damage, and we mak e no other warranty, expressed or implied, including merchantability and fitness for particular use. disclaimer life support policy sso does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to p ersonal injury or death. users of sso devices in life suppor t applications assume all risks of such use and agree to indemnify sso against any an d all damages resulting from such use. life support devices are defi ned as devices or systems whic h, (a) are intended for surgical im plant into the body, or (b) support or sustain life, and (c) whose failure to perf orm when used properly in accordance with instructions for u se can be reasonably expected to result in si gnificant injury to the user, or (d) a crit ical component in any component of a life support device or system whose failure can be reasonably expected to c ause failure of the life support device or sys tem, or to affect its safety or effe ctiveness. www.ssousa.com ? +1.408.293.4600 page 5 of 5 AD2C111-L rev 1.40 (03/31/2008) ? 2008 solid state optronics ? san jos, ca wit h current limit ing
|
