sensing element/gauge fgm-3,fgm-6 data sheet features . very small surface mountable package, easy to mount on pcb . vacuum pressure measurable . non-corrosive liquid measurable(fgmc-3, fgmc-6 available) applications . industrial instrumentation . pressure switch, pneumatic device . medical device . turbo boost pressure measurement for automotive system pressure type gauge pressure model fgm-3 fgm-6 package configuration surface mount package, 3mm pressure port surface mount package, 6mm pressure port model/rated pressure 02pg 05pg 07pg 15pg 30pg 50pg 70pg 120pg unit recommended operating conditions pressure type gauge pressure rated pressure 13.79 34.47 48.26 103.4 206.8 344.7 482.6 827.4 kpa 0.141 0.352 0.492 1.055 2.109 3.516 4.922 8.437 kg/cm 2 measurable pressure range 13.79 13.79 34.47 34.47 48.26 48.26 98.07 103.4 98.07 206.8 98.07 344.7 98.07 482.6 98.07 827.4 kpa pressure media fgm : non-corrosive gas only, fgmc : non-corrosive gas and liquid excitation current (constant) 1.5 madc absolute maximum rating maximum load pressure twice of rated pressure 1.5times of rated pressure maximum excitation current 3madc operating temperature 20 100 storage temperature 40 120 operating humidity 30 80 (no dew condensation) rh electric performances/characteristics (excitation current i=1.5ma constant, ambient temperature ta=25 ) full scale span voltage 60 140 mv offset voltage 20 mv bridge impedance 4000 6000 mechanical response time 2 (for the reference) msec y c a r u c c a temperature sensitivity of offset (tso) 5fs/050 temperature coefficient of sensitivity (tcs) 2.5 fs/0 50 linearity 0.5 0.3 0.5 0.6 fs pressure hystersis 0.4 0.2 0.4 fs part number for ordering fgm c - 3 07p g s r measurable pressure range (kpa) part number for ordering 13.79 13.79 fgm-302pgsr fgm-602pgsr 34.47 34.47 fgm-305pgsr fgm-605pgsr 48.26 48.26 fgm-307pgsr fgm-607pgsr 98.07 103.4 fgm-315pgsr fgm-615pgsr 98.07 206.8 fgm-330pgsr fgm-630pgsr 98.07 344.7 fgm-350pgsr fgm-650pgsr 98.07 482.6 fgm-370pgsr fgm-670pgsr 98.07 827.4 fgm-3120pgsr fgm-6120pgsr terminal leads direction(see outline diagram) r: rated pressure (psi) model fgm length of the pressure port 3:3mm 6:6mm terminal leads configuration s : surface mount package pressure type g : gauge pressure available pressure media no mark : non-corrosive gas only c : non-corrosive gas and liquid (contact us about availability) specifications ) please consult us available liquid pressure media when you chose the c models. 1
1 2.54 2.54 0.8 7 7 0.15 0.8 10.3 15 max. 3 0.25 3.5 3 6.5 123 654 123 65 4 vent hole pressure port index labelled faceplate 2.54 2.54 1.4 9.4 1.7 land-pads 2.54 2.54 0.8 7 7 0.8 10.3 max. 15 1 3 0.25 3.5 0.5 6 9.5 2-r0.5 123 123 654 654 projections projections vent hole pressure port labelled faceplate index 2.54 2.54 6.0 1.4 2- 1(holes for projections) 6.0 9.4 1.7 land-pads fgm-3 unit(mm) fgm-6 unit(mm) recommended footprint for pcb unit(mm) recommended footprint for pcb unit(mm) sensing element/gauge fgm-3,fgm-6 data sheet outline dimensions 2
3 1 6 1 6 2 5 r 2 i 1.5ma r 1 r 4 r 3 zero balancing trimmer (vr 0 ) is available. vr 0 : 200 vr 0 constant current source output voltage fgm unit(mm) sensing element/gauge fgm-3,fgm-6 data sheet note ; please read instruction ?notes? before using the sensor. fujikura reserves the right to change specifications without notice. if you have any questions regarding technical issues or specifications, please contact us. sensor engineering department 5-1 kiba 1-chome, koto-ku, tokyo 135-8512, japan phone +81-(0)3-5606-1072 fax. +81-(0)3-5606-1538 e-mail : sensor@fujikura.co.jp connection diagram 3
|
