0.425 [10.8mm] 0.375 [9.5mm] 0.075 [1.9mm] 0.100 [2.5mm] c/l 0.170 [4.3mm] cathode i.d. mark 2 (h-30xc-2-xxx) 1 (h-30xc-1-xxx) 0.030 [0.8mm] sq. typ. dia typ. typ. h 0.130 [3.3mm] .128[3.3] .150[3.8] .128[3.3] .150[3.8] .128[3.3] .150[3.8] dia .150[3.8] .128[3.3] .150[3.8] .128[3.3] 2 .540[13.7] h-300-2-540 h-300-2-560 h-300-1-580 h-300-2-580 h-300-1-560 2 .580[14.7] .560[14.2] .580[14.7] .560[14.2] 2 1 1 part no. h-300-1-500 H-300-2-500 h-300-1-520 h-300-2-520 h-300-1-540 2 .520[13.2] .520[13.2] .540[13.7] 2 1 1 .500[12.7] .500[12.7] c/l 1 id mark .640[16.3] .680[17.3] .660[16.8] .680[17.3] .660[16.8] .620[15.7] .640[16.3] .620[15.7] .600[15.2] .600[15.2] h standard tolerance a 1. general specifications: bivar molded component specification bv00-e101. cage code : 32559 part no: title: cad generated document, do not measure drawing. stacking triple t-1 (3mm) decimals .x .1 .xx .01 .xxx .005 david green m. chen ( unless otherwise specified ) designed: checked: angular date: date: x 1 12/17/02 12/17/02 4 thomas, irvine, ca. 92618 tel: (949) 951-8808 fax: (949) 951-3974 sheet # of h-300-x-xxx revision: 1 1 e engineering update w/o changes e rev. description 02/27/04 date m. c. approved rtp polyamide nylon 6/6, 0200 fr, black or modified plastics mn6/6-se bk. 2. material: nylon 6/6, 94v-0, black. bivar material code 22-bk. led holder variable diameter
|