clairex technologies, inc. 1301 east plano parkway plano, texas 75074-8524 phone: 972-265-4900 fax: 972-265-4949 www.clairex.co m 0.147 (3.73) 0.137 (3.48) cathode anode 0.205 (5.21) 0.215 (5.46) 0.190 (4.83) 0.176 (4.47) 0.100 (2.54) dia. 0.165 (4.19) 0.145 (3.68) 0.025 (0.64) max. 0.019 (0.48) 0.016 (0.41) 1.00 (25.4) min. 0.010 (0.25) max 0.136 (3.45) 0.156 (3.96) cle130w,CLE131W,cle132w high power gallium arsenide ireds clairex ? technologies, inc . februar y , 2001 all dimensions are in inches (millimeters) features ? wide emission angle ? to-46 hermetically sealed package ? excellent heat dissipation ? high power output description the cle130w series are gaas infrared emitting diodes mounted in flat window to-46 hermetic packages. the wide emission angle provides even illumination over a large area. the series are spectrally and mechanically matched to the clt130w phototransistor series. for additional information, call clairex. absolute maximum ratings (t a = 25c unless otherwise stated) storage temperatur e ...................................................................... -55 c to +150c operating temperat ure ................................................................... - 55c to +125c lead soldering temperature (1) ......................................................................... 240c maximum continuous current (2) ..................................................................... 100ma peak forward current (10 s pulse width, 100pps) .............................................. 10a maximum power dissipation (3) ...................................................................... 170mw reverse voltage .................................................................................................... 3v notes: 1. 0.06? (1.5mm) from the header for 5 seconds maximum. maximum temperature can be 260c if wave soldering. 2. derate linearly 0.80ma/c fr om 25c free air temperature to t a = +125c. 3. derate linearly 1.36mw/c fr om 25c free air temperature to t a = +125c. clairex reserves the right to make changes at any time to improve design and to provide the best possible product . ? electrical characteristics (t a = 25c unless otherwise noted) symbol parameter min typ max units test conditions 0.3 - - 0.5 - - e e irradiance (1) cle130w CLE131W cle132w 1.0 - - mw/cm 2 i f = 100ma v f forward voltage - - 1.8 v i f = 100ma i r reverse current - - 10 a v r = 3.0v p peak emission wavelength - 940 - nm i f = 100ma bw spectral bandwidth at half power points - 50 - nm i f = 20ma hp emission angle at half power points - 70 - deg. i f = 20ma t r output rise time - 700 - ns i f = 100ma t f output fall time - 700 - ns i f = 100ma note: 1. measured into a 0.25? aperture, 0.33? from device lens. revised 12/01/04
|
