unisonic technologies co., ltd mc4580 linear integrated circuit www.unisonic.com.tw 1 of 6 copyright ? 2009 unisonic technologies co., ltd qw-r105-013.e dual operational amplifier ? description the utc mc4580 is the dual operational amplifier, specially designed for improving the tone cont rol, which is most suitable for the audio application. featuring noiseless, higher gain bandwidth, high output current and low distortion ratio, and it is most suitable not only for acoustic electronic parts of audio pre-amp a nd active filter, but also for the industrial measurement tools. it is also suitable for the head phone amp at higher output current, and fu rther more, it can be applied for the handy type set operational am plifier of general purpose in application of low voltage single supp ly type which is properly biased of the input low voltage source. ? features *operating voltage (2v ~ 18v) *low input noise voltage (0.8vrms typ.) *wide gain bandwidth product (15mhz typ.) *low distortion (0.0005% typ.) *slew rate (5v/s typ.) *bipolar technology dip-8 sop-8 tssop-8 msop-8 lead-free: mc4580l halogen-free:mc4580g ? ordering information ordering number normal lead free plating halogen free package packing mc4580-d08-t mc4580l-d08-t mc4580g-d08-t dip-8 tube mc4580-p08-r mc4580l-p08-r mc4580g-p08-r tssop-8 tape reel mc4580-s08-r MC4580L-S08-R mc4580g-s08-r sop-8 tape reel mc4580-sm1-r mc4580l-sm1-r mc4580g-sm1-r msop-8 tape reel
mc4580 linear integrated circuit unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r105-013.e ? pin configuration ? test circuit
mc4580 linear integrated circuit unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r105-013.e ? absolute maximum ratings (ta=25 c) parameter symbol ratings unit supply voltage v + /v - 18 v input voltage v in 15 v differential input voltage v i(diff) 30 v output current i out 50 ma sop-8 300 dip-8 800 tssop-8 250 power dissipation msop-8 p d 250 mw junction temperature t j +125 c operating temperature t opr -40~+85 c storage temperature t stg -40~+125 c note absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only an d functional device operat ion is not implied. ? electrical characteristics (v+ /v-=15v, ta=25 c) parameter symbol test condition min typ max unit input offset voltage v i(off) r s Q 10k ? - 0.5 3 mv input offset current i i(off) - 5 200 na input bias current i i(bias) - 100 500 na large signal voltage gain gv v out =10v, r l R 2k ? 90 110 - db output voltage swing v om r l R 2k ? 12 13.5 - v input common mode voltage v i(cm) 12 13.5 - v common mode rejection ratio rr r s Q 10k ? 80 110 - db supply voltage rejection ratio svr rs Q 10k ? 80 110 - db operating current i cc - 6 9 ma slew rate sr r l R 2k ? - 5 - v/s gain bandwidth product gb f=10khz - 15 - mhz total harmonic distortion thd gv=20db,v out =5v,r l =2k ? , f=1khz - 0.0005 - % input noise voltage en riaa rs=2.2 k ? , 30khzlpf - 0.8 - vrms
mc4580 linear integrated circuit unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r105-013.e ? typical characteristics ) hz nv (
mc4580 linear integrated circuit unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r105-013.e ? typical characteristics(cont.) voltage gain, a v (db) total harmonic distortion, thd (%) phase, ?(deg)
mc4580 linear integrated circuit unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r105-013.e utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
