everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 1 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen technical data sheet luminosity white color led 59-146utd/tr8 features ? super luminosity white led. ? built in 4 led chips. ? wide viewing angle. ? soldering methods: reflow soldering. ? high performance. ? package in 12mm tape on 7 diameter reel. ? pb-free. ? the product itself will remain within rohs compliant version. descriptions ? the 59-146 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? amusement equipment. ? information boards. ? flashlight for digital camera of cellular phone. ? lighting for small size device. device selection guide chip material emitted color resin color ingan white yellow diffused
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 2 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen package outline dimensions 4 6 8 2 a a sec a-a (view back) solder pattern (3) (4) (7) (8) (2) (1) (6) (5) polarity pin mark c l 1 7 3 5 4 6 8 2 1 7 3 5 2 8 1 7 4 3 5 package mark 6 note: the tolerances unless mentioned is 0.1mm ,unit = mm
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 3 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @ 400ms) i fp 100 ma power dissipation pd 110 mw electrostatic discharge(hbm) esd 1000 v electrostatic discharge (cdm) esd 500 v operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. * the value are base d on the 1-die performance. electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition 5.0 8.5 15.0 i f =20ma *2 luminous intensity *1 iv 10.0 25.0 45.0 cd i fp =100ma *2 (duty 1/10 @ 400ms) viewing angle *1 2 1/2 ----- 50 ----- deg i f =20ma *2 2.0 2.4 2.8 i f =0.1ma *2 forward voltage *2 2.8 3.2 3.7 i f =20ma *2 forward voltage *2 -25 < t < 30 v f 3.6 4.3 5.2 v i fp =100ma *2 (duty 1/10 @ 400ms) reverse current *2 i r ----- ----- 50 a v r =5v *2 *1 when 4 led dies are operated simultaneously. *2 for each die. note: the products are sensitive to static electricity and care must be fully taken when handling products.
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 4 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen color ranks rank b3 rank b4 x 0.327 0.323 0.344 0.347 x 0.347 0.344 0.370 0.370 y 0.335 0.345 0.370 0.355 y 0.355 0.370 0.400 0.379 rank b5 rank b6 x 0.336 0.327 0.347 0.351 x 0.351 0.347 0.370 0.370 y 0.316 0.335 0.355 0.334 y 0.334 0.355 0.379 0.358 rank c0 x 0.370 0.370 0.401 0.396 y 0.358 0.400 0.425 0.391 *the c.i.e. 1931 chromaticity diagram ( tolerance 0.01). cie chromaticity diagram
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 5 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen typical electro-optical characteristics curves ta=25 radiation diagram relative luminous intensity ( ) % relative luminous intensity forward current luminous intensity vs ) ( % ta=25 forward current derating curve forward current i (ma) f wavelength (nm) spectrum distribution ta=25c forward current vs. forward voltage ta=25c f forward voltage v (v) forward current i (ma) f relative luminous intensity % ) ( luminous intensity vs. ambient temperature ambient temperature ta (c) ambient temperature ta (c) forward current i (ma) f d u t y = 1 / 1 0 f = 1 k h z
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 6 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen label explanation cat: luminous intensity rank hue: chromaticity coordinates ref: forward voltage rank reel dimensions note: the tolerance unless mentioned is 0.1mm ,unit is mm
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 7 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen carrier tape dimensions: taping quantity: 800pcs note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 8 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 9 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
everlight electronics co.,ltd. 59-146utd/tr8 everlight electronics co., ltd. http://www.everlight.com rev. 1.1 page: 10 of 10 device no.:des-596 prepared date: 03-apr-2007 prepared by: alex chen 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the da mage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as be low figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com
|
