 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Double-Balanced Mixer, 5 - 500 MHz V 4.00 MD-108 Features n n n n RH-3 Low Cost Conversion Loss: 7 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 400 mW max. @ 25C, Derated to 85C @ 3.2 mW/C n IF Port Current: 50 mA Max. n MIL-STD-883 Screening Available Description Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No. 1 2 3* 4 Function LO GND IF GND Pin No. 5 6 7* LO Function * P3 and P7 are connected together to make IF port. Electrical Specifications : TA = -55C to +85C Parameter Test Conditions RF, LO Ports IF Port Frequency 5 - 500 DC - 500 5 - 150 MHz 150 - 500 MHz LO to RF LO to IF RF to IF Positive, if LO input at Pin 1 5 - 150 MHz 150 - 500 MHz 5 - 150 MHz 150 - 500 MHz 5 - 150 MHz 150 - 500 MHz -- Units MHz MHz dB dB dB dB dB dB dB dB -- mV 1 dB Compression 1 dB Desensitization Within 1 dB of Conversion Loss Max. With -10 dBm input, each input 25 MHz and 35 MHz IF -- 100 - 350 MHz 350 - 500 MHz dBm dBm -- Min -- -- -- -- 40 35 35 25 25 20 -- -- Typ -- -- -- -- -- -- -- -- -- -- Max -- -- 7.0 9.0 Frequency Range Conversion Loss w Isolation w .D w t a 8 S a IF RF GND e h t e U 4 .c m o 1 DC Polarity DC Offset RF Input SSB Noise Figure Typical Two Tone IM Ratio 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. w w w .D dB dB a aS t -- -- -- -- -- ee h -- <1 4U t om .c -- -- -- -- -- -- -- -- -- -- -- -- -- +2.5 0 -- >55 >40 Double-Balanced Mixer, 5 - 500 MHz MD-108 V 4.00 Typical Performance Curves Conversion Loss (LO = +7 dBm, RF = -5 dBm, IF = 5 MHz) 8 60 Isolation (Input = +7 dBm) L-R L-X R-X Conversion Loss (dB) 7 Isolation (dB) 50 40 6 30 5 5 10 20 50 100 200 300 400 500 20 5 10 20 50 100 200 300 400 500 Frequency (MHz) Frequency (MHz) Conversion Loss vs. LO Power (LO = 200 MHz, RF = 140 MHz @ -10 dBm, IF = 60 MHz) 12 Ordering Information Part Number MD-108 PIN Package RH-3 10 Loss (dB) 8 6 4 -5 0 5 10 15 LO Power (dBm) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information. 2 n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 |
Price & Availability of MD-108
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |