View SC9637B_380395.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
SC9637B
CD DIGITAL SERVO SIGNAL PROCESSOR WITH MCU (2/4 DIGITS LCD DISPLAY AND REMOTE CONTROL)
DESCRIPTION SC9637B is a CD BOOMBOX project with low cost. It has agile functions and good performance with few external components. FEATURES * Compatible with CD/CD-R/CD-RW * Support CD play /pause * Support CD previous track/next track * Support CD skip forward/skip backward * Support CD single music, and whole disk repeat play display. * Support CD random play display * Support program play for 20 music at most * Support LED and LCD two display modes(Free selecting by jumper, and LED has only 2 digits) * Support 2digit and 4digit two display modes in LCD mode.(Free selecting by jumper) * Support browse play(only LCD 4digit) * Support current play time display(only LCD 4digit) * Support compatible manual and auto control CD tray.. * Support 10 keys at most, and can select the key according to needed functions. * Support clock CD options(Select power on auto play) * Support full function remote control (SC6122) * Compatible with various chips(Free selecting by jumper) BLOCK DIAGRAM APPLICATIONS * Desktop CD audio ORDERING INFORMATION Device SC9637B Package QFP-64-14X14-0.8
QFP-64-14 x 14-0.8
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 1 of 15
www..com
SC9637B
ABSOLUTE MAXIMUM RATINGS (Tamb=25C) Characteristics Supply Voltage Input Voltage On Pins Operating Temperature Symbol VDD VIN Topr Ratings -0.5 ~ +5.5 -0.5 ~VDD + 0.5 -20 ~ +75 Unit V V C
ELECTRICAL CHARACTERISTICS(VDD=4.5~5.5V;VSS=0V;Tamb=-10~+50C) Characteristics Supply Voltage Supply Current RFIN Input Signal Reference Voltage Common Mode DC Input Current Of Central Diode B Input Current Of Central Diode A Input Current Of Central Diode C Input Current Of Central Diode D Input Current Of Satellite Diode F Input Current Of Satellite Diode E Low-level Input Current at PA Port. High-level Output Current at PA Port. Low-level Input Current at PB Port. High-level Output Current at PB Port. LDON Low-level Input Current Load Resistance DAC Full-Scale DAC Output Voltage RAD Output Current FOC Output Current SLED Current MOTO Output Current Low Level Output Driving Voltage High Level Output Driving Voltage Moto Low Level Output Voltage Moto High Level Output Voltage Symbol VDD IDD VRFIN VIr Vcom IDB IDA IDC IDD IRF IRE IIL(A) IOH(A) IIL(B) IOH(B) ILDON RL VFS IRAD IFOC ISLED IMOTO VOLDRIVE1 VOHDRIVE1 VOLmoto VOHmoto Left channel is the same as the right. Left channel is the same as the right. High level is the same as the low level. High level is the same as the low level. High level is the same as the low level. High level is the same as the low level. RAD,FOC,SELD RAD,FOC,SELD 5V(When working) CD is Condition Min. 4.5 0 0 0 0 0 0 0 5 0.9 0 0 0 0 0 VDD-0.4 0 VDD-1 Typ. 5.0 50 1 0.5VDD 2.5 10 5 10 5 1.1 1 1 1 5 Max. 5.5 9 9 9 9 4.5 4.5 2 1.2 10 0.4 VDD 1.0 VDD V A A A A A A mA mA mA mA mA K V mA mA mA mA V V V V Unit V mA V
(To be continued)
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 2 of 15
www..com
SC9637B
(Continued)
Characteristics RAD, FOC, SLED, MOTO Output 3State Leakage Current DAC Total Harmonic Distortion Plus Noise
Symbol IZODRIVE (THD+N)/S O
Condition RAD,FOC,SELD,MOT
Min. -10 60
Typ. 0 65 8.4672
Max. +10 70 0.001 2
Unit A dB dB dB dB dB dB dB dB dB MHz
0 to 19 kHz 19 to 20 kHz 24KHz DA Filter Attenuation Filter_DA 25 to 35 KHz 35 to 64 KHz 64 to 68 KHz 68KHz 69 to 88KHz OSC Frequency PIN CONFIGURATIONS Fsystem
1 25 40 50 31 35 40
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 3 of 15
www..com
SC9637B
PIN DESCRIPTION Pin No. 1 Symbol LCD/LED I/O I Description Display mode selecting jumper input When connects to ground, it is LED display. When connects to high level, it is LCD display. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 9258_MUTE KIN2 KIN1 REMOTE DIODE_IN OPEN/P0 CLOSE OPMTR CLMTR LED_COM1/P1 LED_COM2/P2 MVSS MVDD MRST MTEST COM0 COM1 COM2 COM3 SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 P3 AMP_MUTE VSSP O I I I I I I O O O O ----O O O O O O O O O O O O O O O -9258 mute output. Close 9285 driver when CD stops. Key input Key input Remote control decoding input Jumper selecting input The CD tray opens input pin which is low active. This pin is used as the jumper selecting output at the same time. The CD tray closes input pin which is low active. CD tray driver output. CD tray driver output. LED display driver COM1 This pin is used as the pick up head selecting output at the same time. LED display driver COM1 This pin is used as the pick up head selecting output at the same time. MCU GND MCU power supply. MCU reset pin. MCU test pin which is connected to the ground. LCD COM0 port LCD COM1 port LCD COM2 port LCD COM3 port LCD SEG0 port /LED SEG0 port LCD SEG1 port /LED SEG0 port LCD SEG2 port /LED SEG0 port LCD SEG3 port /LED SEG0 port LCD SEG4 port /LED SEG0 port LCD SEG5 port /LED SEG0 port LCD SEG6 port /LED SEG0 port LCD SEG7 port /LED SEG0 port LCD SEG8 port/LED SEG0 port CD clock selection jumper output. If connect with the diode, auto play when power on. Amplifier mute output which is high active. MCU GND
(To be continued)
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 4 of 15
www..com
SC9637B
(Continued)
Pin No. 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
Symbol VPP Vddo Vsso VREF R CR CL L RAD FOC SLED MOTO VDD GND V2/SLED_SW LDON Vssal Vdda1 B A C D F E VCOM Idata RFIN RFREF Vssa2 Vdda2 CRIN CROUT
I/O ---O O ---O O O O --I O --I I I I I I I O I I --I O OTP download power supply. DAC Power Supply DAC GND
Description
Internal reference voltage output DAC right channel output DAC right channel filter capacitor. DAC left channel filter capacitor. DAC left channel filter capacitor. Tracking drive output Focus drive output Sled drive output Spindle drive output Servo Supply Voltage Servo Ground, I/O ground Sledge motor position monitor signal input Laser control signal output Analog Ground of Servo Module ADC. Analog Supply Voltage of Servo Module ADC. Central diode current signal input B Central diode current signal input A Central diode current signal input C Central diode current signal input D Satellite diode current signal input F Satellite diode current signal input E DC Voltage Input Data Slice feed-back current output EFM signal input Reference Signal. Servo module HF and the analog ground of PLL. Servo module HF and the analog power supply of PLL. 8.4672MHz input 8.4672MHz output
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 5 of 15
www..com
SC9637B
FUNCTION DESCRIPTION 1. LED illustration
The connection in details is as follows:
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 6 of 15
www..com
SC9637B
2.
LCD illustration The circuit adopts LCD of 4x10, 5V, 1/4duty, and 1/3bias, and the panel is as follows: 4 DIGIT: 2 DIGIT:
Corresponding truth table: COM0 SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 3. Jumper Jumper Description 3A INT 4A 1 ALL 1A
PLAY
COM1 RAND 1F 1B 2F 2B 3F 3B 4F 4B
COM2 RPT 1G 1C 2G 2C 3G 3C 4G 4C
COM3 PROG 1E 1D 2E 2D 3E 3D 4E 4D
2A
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 7 of 15
www..com
SC9637B
Function Description in details (note: if it is 1, the jumper diode is connected) Flag LCD/LED 0 1 LED mode(connect to GND) LCD mode(connect to high level) Function Description Select LED or LCD display mode LCD/LED(PIN1) Function
This jumper is used to determine whether to play at once after complete reading the TOC in LED mode. P0(PIN7) P0 0 1 Function Stop after complete reading TOC. Play the first track after complete reading TOC.
This jumper is used to select 2digit mode or 4digit mode in LCD mode. P0(PIN7) P0 0 1 P1 P1(PIN11)/P2(PIN12) 0 0 1 1 CD clock option P3 P3(PIN30) 0 1 STOP_CLOCK 4. Keyboard Function Stop after complete reading TOC when power on. Play the first track after complete reading TOC when power on. Function 2digit display 4digit display P2 0 1 0 1 SANYO DA11 SONY KSS213C, SUMSUNG B31 THOMSON TCP11 JIANGHAIGM9350 Function Function
Select pick up head
1.
Keyboard Arrangement:
2.
The keyboard Arrangement of the remote controller:
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 8 of 15
www..com
SC9637B
5.
CD mode 5.1 CD Key Functions 1) STOP Press this key when the CD plays will stop the CD play, but do not clear the repeat and programming state. Press this key when the CD stops, it will clear the repeat and programming state. 2) PLAY/PAUSE When CD stops, it will play if press this key, and display the CD track; When CD plays, it will pause if press this key, and the display flashes. 3) NEXT/FF Next track in selecting mode. Press this key less than 1 second; skip to next track in playing mode. Press this key less than 1 second, skip forward. 4) PREV/FW Last track in selecting mode. In playing mode, press this key less than 1 second; skip to last track and if the play time is over 3 seconds, than skip to the first track. In playing mode, press this key more than 1 second, skip backforward. 5) RAND Switch to random play state. Display rotative light in LED mode. Display RDM flag in LCD mode. 6) RPT Switch to single track or repeat the whole disk state. Press the key RPT to repeat the current track, and "RPT" flashes. Press the key RPT again; repeat the whole disk, and "RPT" display. 7) PROG Enter the programming state (active in STOP sate), and "PROG" flashes. Press REW/FF to select the music, and PROG is to store the music; Programming number increases by 1, and it can store 20 tracks at most. If there is no operation in 30 seconds, exit the programming state, while the tracks are reserved. After complete programming, press the key PLAY to enter the programming play state, and "PROG" lights. 8) OPEN/CLOSE When the CD tray is closed, if press this key, CD stops and is out of the tray. When the CD tray is open, if press this key, close the tray. 9) INTRO Press this key to enter the audition mode. Each music plays for 10 seconds (only in LCD 4digit mode).
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 9 of 15
www..com
SC9637B
5.2 LED display 1When the CD tray is open, display. 2When reading TOC, flashes.
3 After complete reading TOC, display the max. Music number.
4When play, the PLAY lights.
5When pause, the PLAY flashes.
6When programming play, the PROG lights
7 When random play, light and the music number display by turns.
8When repeat the single music, the RPT flashes.
9When repeat the whole disk, the RPT lights.
10 When select the music, the music number flashes
PLAY PROG RPT
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 10 of 15
www..com
SC9637B
5.3 LCD display2 DIGIT 1When the CD tray opens, display. 2When read TOC, flashes.
3 After complete reading TOC, display the max. music number.
4When play, the PLAY lights.
5When pause, the PLAY flashes.
6When programming play, the PROG lights.
7When random play, the RAND lights.
8When repeat the single music:
9When repeat the whole disk:
10 When select the music, the music number flashes.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 11 of 15
www..com
SC9637B
5.4 LCD display4 DIGIT 1When the CD tray is open, display. 2When read TOC, flashes.
3 Display the max track number after complete reading the TOC:
4Display the current time when playing
5Pause:
6Random play:
7Repeat the single track:
8Repeat the whole disk:
9 The number of track flashes when programming:
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 12 of 15
www..com
SC9637B
APPLICATION CIRCUIT 1. LED display mode
FEATURES: * Pickup matching: THOMSON TCP11; SONY KSS2132C; SAMSUNG B31/33/B35; SANYO DA11; GM9350; * CD/RW COMPATIBLE
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 13 of 15
www..com
SC9637B
2.
LCD display mode
FEATURES: * Pickup matching: THOMSON TCP11; SONY KSS2132C; SAMSUNG B31/33/B35; SANYO DA11; GM9350; * CD/RW COMPATIBLE
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 14 of 15
www..com
SC9637B
PACKAGE OUTLINE QFP-64-14X14-0.8 Unit: mm
MOS DEVICES OPERATE NOTES:
Electrostatic charges may exist in many things. Please take following preventive measures to prevent effectively the MOS electric circuit as a result of the damage which is caused by discharge: The operator must put on wrist strap which should be earthed to against electrostatic. Equipment cases should be earthed. All tools used during assembly, including soldering tools and solder baths, must be earthed. MOS devices should be packed in antistatic/conductive containers for transportation.
Disclaimer: * Silan reserves the right to make changes to the information herein for the improvement of the design and performance without further notice! * All semiconductor products malfunction or fail with some probability under special conditions. When using Silan products in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards strictly and take essential measures to avoid situations in which a malfunction or failure of such Silan products could cause loss of body injury or damage to property. * Silan will supply the best possible product for customers!
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.0
2008.03.24 Page 15 of 15

▲Up To Search▲

Price & Availability of SC9637B

	To Download SC9637B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .