View 3_369017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SAFETY DATA SHEET
Loctite Corporation
Environmental Health & Safety Affairs Health & Regulatory Affairs - Europe
PP CHEMICAL METAL (PP-1/2/3/4,8 & 9)
PP 00002 6.00 IE EA 19.04.1999 MSDS_IE
This safety data sheet has been prepared in accordance with the requirements of EC Directive 88/379/EEC and 91/155/EEC (and other related directives) and provides information relating to the safe handling and use of the product.
1.
PRODUCT AND COMPANY INFORMATION
Product Code Trade Name Manufacturer/Supplier Address
PP 00002 PP CHEMICAL METAL (PP-1/2/3/4,8 & 9) Loctite Sweden AB Box 8823 40271 Goteborg, Sweden 46-31-7505400
Phone Number 46-31-7505391 Fax Number Emergency Phone Number +353-1-4599301/+353-1-87-2629625/+353-1-4046444
2.
COMPOSITION / INFORMATION ON INGREDIENTS
Nature
General purpose sealant Mixture of Unsaturated Polyester Resin and Inorganic Fillers Concentration
5.00 - 20.00
Hazardous Components in Product for EC
Component Name
Styrene Monomer
R Phrases
R10, R20, R36/38
Classification
3.
HAZARD IDENTIFICATION
Flammable. Harmful by inhalation. Irritating to eyes and skin.
4.
FIRST AID MEASURES
First Aid - Inhalation Remove affected person to fresh air, and if still feeling unwell seek medical attention. First Aid - Skin Wash skin with plenty of soap and water. First Aid - Eyes Flush eyes immediately with plenty of water for at least 15 minutes. First Aid - Ingestion Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.
5.
FIRE FIGHTING MEASURES
No unusual fire hazards. If product is involved in fire extinguish with dry powder, foam or carbon dioxide. Thermal decomposition would produce a complex variety of chemical species, some of which could be irritating and/or harmful if inhaled in significant volumes.
6.
ACCIDENTAL RELEASE MEASURES
Ventilate area. Eliminate sources of ignition. For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal.
MSDS_IE
Page 1 of 4
SAFETY DATA SHEET
Loctite Corporation
Environmental Health & Safety Affairs Health & Regulatory Affairs - Europe
PP CHEMICAL METAL (PP-1/2/3/4,8 & 9)
PP 00002 6.00 IE EA 19.04.1999 MSDS_IE
6. 7.
ACCIDENTAL RELEASE MEASURES
Wash spillage site thoroughly with soap and water or detergent solution.
HANDLING AND STORAGE
Handling Use in well ventilated area. Avoid inhaling vapour. Adequate ventilation is recommended to remove traces of odour. Avoid sources of ignition - no smoking. Avoid contact with skin and eyes. Storage Storage temperature range 1C to 25C. Store away from heat in a cool, well-ventilated area. Store away from direct sunlight.
8.
EXPOSURE CONTROLS / PERSONAL PROTECTION
Good industrial hygiene practices should be observed. In circumstances where there is a potential for prolonged or repeated skin contact, the use of disposable gloves (polyethylene, natural rubber or equivalent ester-resistant material) is recommended.
9.
PHYSICAL AND CHEMICAL PROPERTIES
Physical State Colour Odour pH Boiling Range/Point (C) Flash Point (CC) (C) Specific Gravity Solubility in Water (kg/m) Solubility in Acetone Vapour Pressure (mmHg @25C) Explosion Limits (%)
Paste. Grey. Characteristic. N/A 100 32 1.8 at 20 C. Insoluble. Insoluble <10 N/A
10. STABILITY AND REACTIVITY
The product is relatively stable under normal conditions of use. Extreme heat or exposure to flame should be avoided.
11. TOXICOLOGICAL INFORMATION
Inhalation This product is harmful by inhalation. Inhalation of vapours may cause headaches or dizziness. May cause irritation to respiratory system and mucous membranes if used in confined spaces. Skin This product is classified as a skin irritant. Solvent may remove essential oils from the skin making it susceptible to attack from other Page 2 of 4
MSDS_IE
SAFETY DATA SHEET
Loctite Corporation
Environmental Health & Safety Affairs Health & Regulatory Affairs - Europe
PP CHEMICAL METAL (PP-1/2/3/4,8 & 9)
PP 00002 6.00 IE EA 19.04.1999 MSDS_IE
11. TOXICOLOGICAL INFORMATION
chemicals. Eyes This product is an irritant to the eyes. Vapours may be irritating to eyes causing lachrymatory effect. Ingestion This product is considered to be of low toxicity. May irritate the digestive tract. Ingestion of large quantities may cause damage to liver or kidneys.
12. ECOLOGICAL INFORMATION
Keep away from drains and open waters. Biodegradable product of low ecotoxicity. Biological and Chemical Oxygen Demands (BOD and COD) of cured Loctite products are insignificant. In the cured state contribution of this product to Environmental Hazards is insignificant in comparison to articles in which it is used.
13. DISPOSAL CONSIDERATIONS
After use, tubes, cartons and bottles containing residual product should be disposed of as "chemically contaminated waste" in an authorised legal land fill site or incinerated. Dispose of in accordance with local and national regulations. Incineration under controlled conditions recommended. Contribution of this product to waste is very insignificant in comparison to article in which it is used. Regulations governing disposal of individual articles apply.
14. TRANSPORT INFORMATION
UN Number Air (IATA) Sea (IMO) Road (ADR)/Rail (RID)
3269 Polyester Resin kit, flammable liquid, Class 3, Pkg. Grp. III. Polyester Resin kit n.o.s. CLass 3.3, Pkg. Grp III. Polyester Resin kit, Class 3, label No. 3.
15. REGULATORY INFORMATION
Contains
Labelling Information Harmful Styrene Monomer None
R phrases S phrases
Voluntary Labelling
R10 Flammable. R20 Harmful by inhalation. R36/38 Irritating to eyes and skin. S2 Keep out of the reach of children. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of soap and water. S16 Keep away from sources of ignition - No Smoking. N/A
MSDS_IE
Page 3 of 4
SAFETY DATA SHEET
Loctite Corporation
Environmental Health & Safety Affairs Health & Regulatory Affairs - Europe
PP CHEMICAL METAL (PP-1/2/3/4,8 & 9)
PP 00002 6.00 IE EA 19.04.1999 MSDS_IE
16. OTHER INFORMATION
MSDS first issued MSDS data revised 13 November 1995 19 April 1999
Prepared by: Dr. Prabhu Kulkarni FICI., MIOSH., MBIRA., Senior Chemist. Health & Regulatory Affairs - Europe Further Information may be obtained from:Loctite Corporation, Health and Regulatory Affairs - Europe, Tallaght Business Park, Whitestown, Dublin 24, Ireland. Tel: +353-1-4046444. Fax: +353-1-4510806. Attention of users is drawn to the possible hazards from improper use of the product(s). The information in this safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Supersedes Safety Data Sheet No: PP 00002 dated 30/10/97
MSDS_IE
Page 4 of 4

▲Up To Search▲

Price & Availability of 3

	To Download 3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .