View NES_358991.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Mini Feed-Through 15mm
For wire-to-wire connecting in control, automation, instrumentation and power distribution applications. Altech "miniature" terminal blocks offer tremendous space advantage as demanded by certain wiring configurations.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque Other Approvals Cat. No. Std. Pk. 100 50 50 Cat. No. 22-10 AWG 300 V 35 A 6 lb-in 0.5-4 sq.mm 400 V 32 A 0.5 Nm 6 mm 29 x 27 mm 9 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
E220514
CMT4
CGMT4
6 mm 28.5 x 27 mm 9 mm Polyamide 6.6 2 screw clamps
E220514
22-10 AWG 300 V 35 A 7 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG
32A 7 lb-in 0.5 Nm 7 lb-in
AEx eII Ex eII
Std. Pk. 50
Terminal Block
End Plate Isolation Partition DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
CMT4
EPCMT4 PPCMT4
CGMT4
CA602
100
COLOR BLOCKS
(other than grey standard)
CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q
100 100 100 10 100 100 100 10 100 100 100 100 100 10 100 100 100 100 20 100 MT2 100
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Insulated Internal Jumper Current Bars
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
CA714/2 CA714/3 CA714/4 CA714/10 MT2
Marking Tags (MT Type) (MT Type on Lever)
44
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
Mini Feed-Through Fuse Block, 5 x 20 and 5 x 25 mm
Certain electrical and control systems require protection by fuses. The terminal has a hinged carrier that has a specially designed space for a cartridge type glass fuse of size O5 x 20 or O5 x 25 mm. The fuse can be engaged or disengaged by the movement of the carrier. Altech fuse terminals are also available with light indication CSFL 4U (L). A specially de-signed built-in circuit gives light indication in the event of fuse blow out. Fuses are sold separately Altech, see pages 23-24. *Add required voltage to part number as a suffix, i.e. CSFL4U(L)/24 for 24V DC
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection LED Voltage Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque Other Approvals Cat. No. Std. Pk. 100 50 50 Cat. No. Std. Pk. 22-10 AWG 600 V 6.3 A 7 lb-in 0.5-4 sq.mm 500 V 6.3 A 0.5 Nm
CSFL4U
CSFL4U(L)*
Fuse not included. 8 mm 43 x 58 mm 9.5 mm Polyamide 6.6 2 screw clamps
Fuse not included. 8 mm 43 x 58 mm 9.5 mm Polyamide 6.6 2 screw clamps 24VAC/DC, 48VAC/DC, 1 10VAC/DC, 220VAC, 300VAC
O5x20, O5x25mm
E220514
O5x20, O5x25mm
E220514
22-10 AWG 600 V 8A 7 lb-in
22-10 AWG 600 V 6.3 A 7 lb-in
0.5-4 sq.mm 500 V 6.3 A 0.5 Nm
22-10 AWG 600 V 8A 7 lb-in
Terminal Block
End Plate Isolation Partition DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
CSFL4U
EPCSFL4U PPCSFL4U
CSFL4U(L)* 100
EPCSFL4U PPCSFL4U 50 50
CA602
100
CA602
100
Insulated Internal Jumper Current Bars
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2 100 50 50 20 100 100 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2 100 50 50 20 100 100 45
Marking Tags (MT Type) (MT Type on Lever)
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
Mini Feed-Through Panel Mount
For use when space constraints require extremely compact solutions and internal jumping is required. Individual components can be used to build your own assemblies. Just snap the required number of terminal block components together and place a Mounting Section on each end.
Terminal Width 6 mm 28 x 27 mm 9 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connect.
E220514
CMB4
EPCMB4
The CMB4 accepts internal jumpers and standard marking tags. * Extremely compact and cost effective * High density * Screw-cage clamp * Internal jumping provision * Polyamide 6.6 * Standard color: gray
Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque Other Approvals
Preassembled blocks are also available for quick and easy installations.
See Dimensions below.
22-10 AWG 300 V 35 A 7 lb-in
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm 300 V 35 A 7 lb-in Dimensions mm (in.) CMB4
b a
Cat. No.
Std. Pk. 100 50 100
Terminal Block
Mounting Section Separator Plate Mounting Screw* Internal Jumper 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
CMB4
EPCMB4 SPCMB4
Any length M3 screw may be used. CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 MT2 100 100 100 10 100 100 100 10 100 100 100 100 100 10 100 100 100 100 20 100
Insulated Internal Jumper Current Bars
COLOR BLOCKS
(other than grey standard)
No. of Cat No. Poles CMB4/2 2 CMB4/3 3 CMB4/4 4 CMB4/5 5 CMB4/6 6 CMB4/7 7 CMB4/8 8 CMB4/9 9 CMB4/10 10 CMB4/11 11 CMB4/12 12 CMB4/13 13 CMB4/14 14 CMB4/15 15 CMB4/16 16 CMB4/17 17 CMB4/18 18 CMB4/19 19 CMB4/20 20 CMB4/21 21 CMB4/22 22 CMB4/23 23 CMB4/24 24
Hole Width (a) Spacing (b) 26 (1.02) 19 (0.75) 32 (1.26) 25 (0.98) 38 (1.50) 31 (1.22) 44 (1.73) 37 (1.46) 50 (1.97) 43 (1.69) 56 (2.20) 49 (1.93) 62 (2.44) 55 (2.17) 68 (2.68) 61 (2.40) 74 (2.91) 67 (2.64) 80 (3.15) 73 (2.87) 86 (3.39) 79 (3.11) 92 (3.62) 85 (3.35) 98 (3.86) 91 (3.58) 104 (4.09) 97 (3.82) 110 (4.33) 103 (4.06) 116 (4.57) 109 (4.29) 122 (4.80) 115 (4.53) 128 (5.04) 121 (4.76) 134 (5.28) 127 (5.00) 140 (5.51) 133 (5.24) 146 (5.75) 139 (5.47) 152 (5.98) 145 (5.71) 158 (6.22) 151 (5.94)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Shorting Sleeve & Screw External Jumper
Marking Tags
(MT Type)
Mounting Section EPCMB4
* Any length M3 screw may be used.
46 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
Panel Mount Spring Clamp
Altech "screwless" spring clamp panel mount terminal blocks are an excellent solution for extremely compact wiring applications. These terminal blocks are "add-on" type and can be combined to form multipole assemblies. The stacked assembly is fitted with mounting end sections on both ends for easy installation on to the panel. The terminal has marker holding recessess on three sides to accept marking tags. Cross connection can be achieved with the aid of insulated jumpers. The CSCP2.5T2 panel mount terminal blocks have two connection points on each side all with the same potential.The terminals provide possibility of further multiplication through jumpering. CSCP2.5T CSCP2.5T2
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Other Approvals
5 mm 27 x 35 mm 14 mm Polyamide 6.6 2 spring clamp connections
E220514
10 mm 27 x 35 mm 14 mm Polyamide 6.6 4 spring clamp connections
E220514
22-14 AWG 600 V 20 A
0.5-2.5 sq.mm 22-14 AWG 750 V 24 A 600 V 20 A
22-14 AWG 600 V 20 A
0.5-2.5 sq.mm 22-14 AWG 750 V 24 A 600 V 20 A
Cat. No.
Std. Pk. 100 25 100 1 100
Cat. No.
Std. Pk. 100 25 100 1 100
Terminal Block
End Section (set of left and right) Insulated Jumper (2 pole) Operating Tool Marking Tags (MT Type)
CSCP2.5T
EPCSCP2.5T CA803/1 SCA2-5 MT4
CSCP2.5T2
EPCSCP2.5T CA803/1 SCA2-5 MT3
COLOR BLOCKS
(other than grey standard)
EPCSCP2.5T
CSCP2.5T2 EPCSCP2.5T
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
CSCP2.5T
64
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
High Temperature Ceramic EuroBlocksTM
Suitable for use in high temperature applications up to 600C (1112F). Applications include hot melt glue guns, furnaces, heaters, process equipment and machinery. Terminal blocks are offered with mounting holes for panel mounting or free floating applications. Compact, space saving Tubular screw clamp Free float or panel mount Temperature range: -40C (-40F) to 600C (1112F) * Standard color: white * Material Housing: Steatite Clamp: Brass Screws: Zinc plated steel * * * * CB4 CB6 CB16
Insulation Material Approvals Wire Range Voltage Rating Current Rating No. of Poles 1 (free floating) 2 (free floating) 2 (with mounting holes) 3 (free floating) 3 (with mounting holes)
Ceramic
E220514
Ceramic
E220514
Ceramic
E220514
24-12 AWG 24-12 AWG 300V 30 A Cat. No. CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H 300V 20 A Std. Pk. 50 50 50 50 50
22-10 AWG 20-10 AWG 300V 40 A Cat. No. CB6/1 CB6/2H CB6/3H 300V 30 A Std. Pk. 50 50 50
20-6 AWG 300V 76 A Cat. No.
18-6 AWG 300V 65 A Std. Pk.
CB16/2H CB16/3H
50 50
1 Pole
T W1 W2
2 Pole
T
2 Pole with mounting hole
T W2 D1 H C2 W3
3 Pole
T W3
3 Pole with mounting hole
T
H
H
H
H
D1
C3
D2
D2
Dimensions mm
W CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H CB6/1 CB6/2H CB6/3H CB16/2H CB16/3H 1 2 2 3 3 POLE POLE POLE POLE POLE 23 23 23 25 25.4 25 25.5 25.5 28 27.5 T 11 18 24 25 36 12 26 41 31 48 H 18.5 18.5 18.5 18.5 18.5 19.5 19.5 19.5 23.2 23.2 C * * 14.6 * 13 * 12.6 15 16.5 17 D1 D2 Fixing Screw Stripping Length 6 6 6 6 6 6 6 6 8.5 8.5
6 6
3.5 3.5
M3X16 M3X16
1 POLE 2 POLE 3 POLE 2 POLE 3 POLE
6 6 6 6 3.5 3.5
M3X16 M3X16 M3X20 M3X20
Note: All dimensions are shown in mm, to convert to inches please divide by 25.4. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 65
Busbar System
A quick reliable solution for ground, neutral or low voltage distribution applications. The Busbar System consists of a busbar, busbar supports, and screw clamp terminals for terminating wires NEB 10 (10 x 3 mm) and NEB 6 (6 x 6 mm), tin plated copper busbars are available in one meter lengths. Both have a 140A current carrying capacity. NES plastic support with fixing screws for holding 10 x 3 & 6 x 6 busbar makes placing of busbar an easy task. Busbars up to 200 mm length should be supported at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support. Easy to operate CENC clamp secures wire to the busbar. CENC4 CENC16 CENC35
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals
7.5 mm 30 x 23.3 mm 12 mm Polyamide 6.6 1 screw clamp connection
E220514
9.8 mm 36 x 23.3 mm 16 mm Polyamide 6.6 1 screw clamp connection
E220514
14.5 mm 45 x 27.3 mm 16 mm Polyamide 6.6 1 screw clamp connection
E220514
Wire Range Current Rating* Torque Other Approvals
22-10 AWG 0.5-6 sq.mm 22-12 AWG 10-4 AWG 6-16 sq.mm 10-6 AWG 8-2 AWG 10-35 sq.mm 8-2 AWG 35 A 14 lb-in 41 A 0.8 Nm 14 lb-in 80 A 14 lb-in 76 A 2.0 Nm 125 A 17.5 lb-in 25 lb-in 125 A 2.5 Nm 25 lb-in
Cat. No.
Std. Pk. 50 1m 1m 50 50 100
Cat. No.
Std. Pk. 50 1m 1m 50 50 100
Cat. No.
Std. Pk. 50 1m 1m 50 50 100
Terminal Block**
Busbar (10 x 3 mm) Busbar (6 x 6 mm) Plastic Support with Fixing Screw End Clamp/Bus bar support for rail mounting Marking Tags (MT Type)
CENC4
NEB10 NEB6 NES CA202 MT5
CENC16
NEB10 NEB6 NES CA202 MT6
CENC35
NEB10 NEB6 NES CA202 MT6
* 140A current carrying capacity of busbar should be taken into account while connecting loads. ** Consult for other available colors.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 47

▲Up To Search▲

Price & Availability of NES

	To Download NES Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .