|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PHOTOCOUPLER PS9613,PS9613L 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE -NEPOC Series- 8-PIN DIP PHOTOCOUPLER DESCRIPTION The PS9613 and PS9613L are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for surface mounting. FEATURES * High common mode transient immunity (CMH, CML = 15 kV/s MIN.) * High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) * Maximum propagation delays (tPLH - tPHL = 270 ns TYP.) * Pulse width distortion ( | tPHL - tPLH | = 270 ns TYP.) * Ordering number of tape product: PS9613L-E3, E4: 1 000 pcs/reel * Safety standards * UL approved: File No. E72422 (S) * VDE0884 approved (Option) : No.91877 APPLICATIONS * IPM Driver * General purpose inverter Document No. PN10073EJ02V0DS (2nd edition) Date Published February 2003 CP(K) The mark shows major revised points. PS9613,PS9613L PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9613 9.250.25 8 7 TOP VIEW 6 5 1 2 3 7.62 4 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 6.50.5 2.8 MIN. 4.150.3 0.65 3.50.3 0.880.1 0.50.1 0 to 15 0.25 M 2.54 0.840.43 1.250.15 Lead Bending Type PS9613L 9.250.25 TOP VIEW 8 7 6 5 1 2 3 4 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 6.50.5 3.50.3 0.25 +0.1 -0.05 0.880.1 0.90.25 9.600.4 1.250.15 0.25 M 2.54 2 Data Sheet PN10073EJ02V0DS 0.1 +0.1 -0.05 PS9613,PS9613L FUNCTIONAL DIAGRAM 8 2 6 3 5 Shield LED ON OFF Output L H MARKING EXAMPLE No. 1 pin Mark PS9613 M003 Country Assembled Type Number Assembly Lot M 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Data Sheet PN10073EJ02V0DS 3 PS9613,PS9613L ORDERING INFORMATION (Solder Contains Lead) Part Number PS9613 PS9613L PS9613L-E3 PS9613L-E4 PS9613-V PS9613L-V PS9613L-V-E3 PS9613L-V-E4 Embossed Tape 1 000 pcs/reel Magazine case 50 pcs VDE0884 approved (Option) PS9613 PS9613L Embossed Tape 1 000 pcs/reel Package 8-pin DIP Packing Style Magazine case 50 pcs Safety Standards Approval Approved products other than VDE Application Part *1 Number PS9613 PS9613L *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS9613-A PS9613L-A PS9613L-E3-A PS9613L-E4-A PS9613-V-A PS9613L-V-A PS9613L-V-E3-A PS9613L-V-E4-A Embossed Tape 1 000 pcs/reel Magazine case 50 pcs VDE0884 approved (Option) PS9613 PS9613L Embossed Tape 1 000 pcs/reel Package 8-pin DIP Packing Style Magazine case 50 pcs Safety Standards Approval Approved products other than VDE Application Part *1 Number PS9613 PS9613L *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10073EJ02V0DS PS9613,PS9613L ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current Reverse Voltage Detector Symbol IF VR VCC VO IO PC BV TA Tstg Ratings 25 3.0 -0.5 to +35 -0.5 to +35 15 100 5 000 -40 to +100 -55 to +125 Unit mA V V V mA mW Vr.m.s. C C Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage *1 Operating Ambient Temperature Storage Temperature *1 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. RECOMMENDED OPERATING CONDITIONS Parameter Forward Current Output Voltage Supply Voltage Input Voltage Symbol IF VO VCC VF MIN. 10 0 4.5 0 15 TYP. MAX. 20 30 30 0.8 Unit mA V V V Data Sheet PN10073EJ02V0DS 5 PS9613,PS9613L ELECTRICAL CHARACTERISTICS (TA = -40 to +100C, VCC = 15 V, unless otherwise specified) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector Low Level Output Voltage High Level Output Current High Level Supply Current Low Level Supply Current Coupled Threshold Input Current (H L) Current Transfer Ratio (IC/IF) Isolation Resistance CTR RI-O IF = 10 mA, VO = 0.6 V VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C Isolation Capacitance Propagation Delay Time (H L) *2 Symbol VF IR Ct VOL IOH ICCH ICCL IFHL IF = 10 mA VR = 3 V Conditions MIN. 1.3 TYP. *1 MAX. 2.1 200 Unit V 1.65 A pF V = 0 V, f = 1 MHz, TA = 25C IF = 10 mA, VCC = 5 V, IOL = 2.4 mA VCC = 30 V, VF = 0.8 V VCC = 30 V, VF = 0.8 V, VO = open VCC = 30 V, IF = 10 mA, VO = open VO = 0.8 V, IO = 0.75 mA 30 0.13 1.0 0.6 0.6 1.5 0.6 50 1.3 1.3 5.0 V A mA mA mA 44 10 11 110 % CI-O tPHL V = 0 V, f = 1 MHz, TA = 25C IF = 10mA, RL = 20 k, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V 0.6 250 500 pF ns Propagation Delay Time (L H) *2 tPLH -200 520 750 Maximum Propagation Delays Pulse Width Distortion (PWD) *2 tPLH-tPHL 270 650 |tPHL-tPLH| 270 650 Common Mode Transient Immunity at High Level Output *3 CMH TA = 25C, IF = 0 mA, VO > 3.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF 15 kV/s Common Mode Transient Immunity at Low Level Output *3 CML TA = 25C, IF = 10 mA, VO < 1.0 V, VCM = 1.5 kV, RL = 20 k, CL = 100 pF 15 kV/s 6 Data Sheet PN10073EJ02V0DS PS9613,PS9613L *1 Typical values at TA = 25C. *2 Test circuit for propagation delay time Pulse input (IF = 10 mA) (PW = 10 s, Duty cycle = 1/10) Input (monitor) 47 GND 0.1 F VCC = 15 V Input RL = 20 k IF (ON) 50% IF (ON) 15 V VO (monitor) Output CL = 100 pF VTHHL = 1.5 V VTHLH = 2.0 V tPLH tPHL VOL CL includes probe and stray wiring capacitance. *3 Test circuit for common mode transient immunity VCC = 15 V SW IF 0.1 F B A RL = 20 k VCM 90% 10% tr tf 1.5 kV 0V VO (monitor) VO CL = 100 pF (Switch A: IF = 0 mA) GND VOH 3.0 V 1.0 V VOL VO (Switch B: IF = 10 mA) CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10073EJ02V0DS 7 PS9613,PS9613L TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 40 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 30 100 20 50 10 0 20 40 60 80 100 0 20 40 60 80 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 High Level Supply Current ICCH (A), Low Level Supply Current ICCL (A) SUPPLY CURRENT vs. AMBIENT TEMPERATURE 1 200 1 000 800 ICCL 600 400 200 0 -50 ICCH Forward Current IF (mA) 10 TA = +85C +50C +25C 0C -25C VCC = 30 V, VO = Open, ICCH : VF = 0.8 V, ICCL : IF = 10 mA 1 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (C) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 5 Threshold Input Current IFHL (mA) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 0.6 VCC = 15 V, IF = 10 mA, IO = 2.4 mA 4 VCC = 15 V, VO = 0.8 V, IO = 0.75 mA 0.5 0.4 0.3 0.2 0.1 0 -50 3 2 1 0 -50 -25 0 25 50 75 100 -25 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) 8 Data Sheet PN10073EJ02V0DS PS9613,PS9613L OUTPUT CURRENT vs. AMBIENT TEMPERATURE 1.10 OUTPUT CURRENT vs. FORWARD CURRENT 14 VO = 0.6 V 12 Output Current (Relative Value) IF = 10 mA, 1.05 VO = 0.6 V Output Current IO (mA) 10 TA = +25C 1.00 0.95 0.90 0.85 0.80 0.75 0.70 -40 8 6 4 2 0 0 +100C -40C 5 10 15 20 -20 0 20 40 60 80 100 Forward Current IF (mA) Ambient Temperature TA (C) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT 700 VCC = 15 V, 600 CL = 100 pF, RL = 20 k 500 tPLH 400 300 200 100 0 0 tPHL PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE 1 800 1 600 1 400 1 200 1 000 800 600 400 200 0 -200 0 10 tPLH tPHL tPLH - tPHL 20 30 40 IF = 10 mA, CL = 100 pF, RL = 20 k tPLH - tPHL 5 10 15 20 Forward Current IF (mA) Supply Voltage VCC (V) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL - tPLH (ns) PROPAGATION DELAY TIME vs. LOAD CAPACITANCE Propagation Delay Time tPHL, tPLH (ns) 1 600 VCC = 15 V, 1 400 IF = 10 mA, RL = 20 k 1 200 1 000 800 600 400 200 0 0 100 200 300 400 500 tPHL tPLH 700 600 500 400 300 200 100 0 -40 -20 0 20 40 tPHL tPLH PWD VCC = 15 V, IF = 10 mA, CL = 100 pF, RL = 20 k 60 80 100 Ambient Temperature TA (C) Load Capacitance CL (pF) Data Sheet PN10073EJ02V0DS 9 PS9613,PS9613L PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE VCC = 15 V, IF = 10 mA, 800 CL = 100 pF 600 tPLH - tPHL 400 tPHL 200 0 -200 0 tPLH Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH - tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE 500 VCC = 5 V, 450 IF = 10 mA, 400 CL = 15 pF 350 300 250 200 150 100 50 0 0 5 10 15 20 25 tPHL tPLH - tPHL tPLH 1 000 10 20 30 40 50 Load Resistance RL (k) Load Resistance RL (k) Remark The graphs indicate nominal characteristics. 10 Data Sheet PN10073EJ02V0DS PS9613,PS9613L TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS9613L-E3 PS9613L-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 R 1.0 21.00.8 1001.0 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10073EJ02V0DS 11 PS9613,PS9613L NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 12 Data Sheet PN10073EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS9613L-E3-A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |