|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 25W Single Output Switching Power Supply Features : RS-25 series Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE RS-25-3.3 3.3V 6A 0 ~ 6A 19.8W RS-25-5 5V 5A 0 ~ 5A 25W 80mVp-p 4.75 ~ 5.5V 2.0% 0.5% 1.0% RS-25-12 12V 2.1A 0 ~ 2.1A 25.2W 120mVp-p 10.8 ~ 13.2V 1.0% 0.5% 0.5% 2200ms, 30ms/115VAC at full load RS-25-15 15V 1.7A 0 ~ 1.7A 25.5W 120mVp-p 13.5 ~ 16.5V 1.0% 0.5% 0.5% RS-25-24 24V 1.1A 0 ~ 1.1A 26.4W 120mVp-p 22 ~ 27.6V 1.0% 0.5% 0.5% RS-25-48 48V 0.57A 0 ~ 0.57A 27.36W 200mVp-p 42 ~ 54V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 80mVp-p 2.85 ~ 3.6V VOLTAGE TOLERANCE Note.3 3.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Note.4 Note.5 0.5% 2.0% 80ms/230VAC 88 ~ 264VAC 47 ~ 63Hz 72% 1200ms, 23ms/230VAC 14ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 79% 82% 84% 85% 0.7A/115VAC 0.4A/230VAC COLD START 30A/230VAC <2mA / 240VAC 110 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -20 ~ +70 -40 ~ +85 (Refer to output load derating curve) , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 27.6 ~ 32.4V 55.2 ~ 64.8V I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 6) HARMONIC CURRENT Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204 light industry level, criteria A EMS IMMUNITY MTBF 309.7Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION PACKING 79*51*28mm (L*W*H) 0.2Kg; 60pcs/13Kg/0.57CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RS-25-SPEC 2006-04-12 25W Single Output Switching Power Supply Mechanical Specification 13 RS-25 Case No.931A series Unit:mm 7.62 1 2 3 6.62 4 5 +V ADJ. LED 2-M3 L=4 25.4 55 79 10.5 66.5 2.25 14 Terminal Pin. No Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4 5 Assignment DC OUTPUT -V DC OUTPUT +V 2-M3 28 Block Diagram RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER fosc : 60KHz I/P EMI FILTER +V -V FG O.L.P. PWM CONTROL DETECTION CIRCUIT Derating Curve Static Characteristics (24V) Ta=25 100 Others 32 51 300 250 200 150 100 50 25 80 OUTPUT VOLTAGE (V) 28 24 20 16 12 8 60 3.3V only 40 20 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:RS-25-SPEC 2006-04-12 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice OUTPUT RIPPLE (mVp-p) LOAD (%) |
Price & Availability of RS-25-24 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |