View S-201-135_240572.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

200W Single Output Switching Power Supply
Features :
AC input range selectable by switch
S-201
series
Protections: Short circuit / Overload / Over temperature Cooling by free air convection 100% full load burn-in test Compact size, light weight Fixed switching frequency at 25KHz Low cost High reliability 1 year warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE S-201-5 5V 40A 0 ~ 40A 200W S-201-7.5 7.5V 26.5A 0 ~ 26.50A 198.75W 150mVp-p 6 ~ 9V 2.0% 0.5% 1.0% S-201-12 12V 16.5A 0 ~ 16.5A 198W 150mVp-p 10 ~ 13.2V 1.0% 0.5% 0.5% S-201-13.5 13.5V 14.7A 0 ~ 14.7A 198.45W 150mVp-p 12 ~ 15V 1.0% 0.5% 0.5% S-201-15 15V 13A 0 ~ 13A 198W 150mVp-p 13.5 ~ 18V 1.0% 0.5% 0.5% S-201-24 24V 8.3A 0 ~ 8.3A 199.2W 150mVp-p 20 ~ 26.4V 1.0% 0.5% 0.5% S-201-27 27V 7.4A 0 ~ 7.4A 199.8W 200mVp-p 26 ~ 32V 1.0% 0.5% 0.5% S-201-48 48V 4.2A 0 ~ 4.2A 201.6W 240mVp-p 41 ~ 56V 1.0% 0.5% 0.5%
RIPPLE & NOISE (max.) Note.2 150mVp-p 4.5 ~ 5.6V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC 0.5% 1.0% 24ms at full load
200ms, 100ms at full load 90 ~ 132VAC / 180 ~ 264VAC by switch 47 ~ 63Hz 74% 3.6A/115VAC 45A/115VAC <3.5mA / 240VAC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V Protection type : Shut down o/p voltage, re-power on to recover 90 (RTH3) detect on inside ambient temperature Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +50 -20 ~ +85 (Refer to output load derating curve) , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to UL1950 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 79% 2A/230VAC 45A/230VAC 80% 80% 81% 83% 83% 84% 254 ~ 370VDC
57.6 ~ 67.2V
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class A MTBF 271.9K hrs min. MIL-HDBK-217F (25 ) DIMENSION PACKING 215*115*50mm (L*W*H) 0.93Kg; 12pcs/12Kg/0.92CUFT
OTHERS
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
File Name:S-201-SPEC 2007-10-25
200W Single Output Switching Power Supply
Mechanical Specification
27.5 32.5 117.5 177.5 150
S-201
Case No. 912E
series
Unit:mm
LED +V ADJ. 9 8 7 6 5 4 3 2 1
135
9.5
4-M4 L=5mm
32.5
8
5-M3 L=3mm
50.5
15 215 32.5 150
16
10
115
50
95
Terminal Pin No. Assignment
12 max.
25 50
C L
Pin No. 1 2 3
Assignment AC/L AC/N FG
Pin No. 4~6 7~9
Assignment DC OUTPUT -V DC OUTPUT +V
6-M4 L=6mm
Block Diagram
230 115 EMI FILTER RECTIFIERS & FILTER POWER SWITCHING FAN ON/OFF CONTROL FAN
fosc : 25KHz
I/P
RECTIFIERS & FILTER O.C.P.
+V -V
FG
DRIVER
PWM CONTROL
O.V.P.
Derating Curve
Static Characteristics (24V)
Ta=25
21CFM forced air cooling (L=10cm) 5~12V
100
32 28
300 250 200 150 100 50 25
80
OUTPUT VOLTAGE (V)
Natural convection cooling(15~48V) Natural convection cooling(5~12V)
24 20 16 12 8
60
40
20
-10
0
10
20
30
40
50
60
(HORIZONTAL)
80 160
85 170
90 180
95 190
100 200
105 210
110 220
115 230
120 240
125 250
130 260
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (VAC) 60Hz
File Name:S-201-SPEC 2007-10-25
OUTPUT RIPPLE (mVp-p)
LOAD (%)

▲Up To Search▲

Price & Availability of S-201-135

	To Download S-201-135 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .