 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SAW Bandpass Filter F1G92 Features W-CDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm ) Single-ended Operation RoHS Compliant Package Dimensions 1 6 6 1 2 I 1G92 5 5 2 3 4 4 3 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit dBm Minimum -30 -40 Typical 25 Maximum 85 85 13 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 1/7 SAW Bandpass Filter F1G92 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 30.0 MHz) Amplitude Ripple (In Fc +/- 30.0 MHz) VSWR (In Fc +/- 30.0 MHz) Relative Attenuation 0.3 MHz ~ 1840.0 MHz 1850.0 MHz ~ 1900.0 MHz 2000.0 MHz ~ 2030.0 MHz 2030.0 MHz ~ 2060.0 MHz 2060.0 MHz ~ 3000.0 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance 50 20.0 10.0 4.5 20.0 22.0 -30 32.0 21.0 10.0 47.0 29.0 25 85 13 dBm Ohms dB Typical 1950.0 2.8 1.4 1.8 Maximum 4.0 2.4 2.4 Unit MHz dB dBp-p Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 2/7 SAW Bandpass Filter F1G92 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50 Output 50 Marking Configuration 1) I2) 1G923) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 3/7 SAW Bandpass Filter F1G92 Typical Performance ( at 25 ) CH1 S21 LOG 10 dB/ REF 0 dB 24 Jan 2007 17:29:20 3:-2 . 3230 dB 1 950. 000 000 MHz CH1 Markers Cor 1 3 2 1:-2 . 9426 dB 1. 92000 GHz 2:-2 . 6196 dB 1. 98000 GHz CENTER1 950. 000 000 MHz SPAN 600. 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB 24 Jan 2007 17:19:40 1:-2 . 6129 dB 1 950. 000 000 MHz CH1 Markers Cor 1 2:-38 . 759 dB 2. 14000 GHz 2 START . 010 000 MHz STOP 3 000. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 4/7 SAW Bandpass Filter F1G92 Input / Output VSWR Charts 24 Jan 2007 17:29:30 3: 2. 1750 1 950. 000 000 MHz 24 Jan 2007 17:29:37 3: 1. 9878 1 950. 000 000 MHz CH1 S11 SWR 1/ REF 1 CH1 S22 SWR 1/ REF 1 CH1 Markers Cor 1: 1. 5531 1. 92000 GHz 2: 2. 1366 1. 98000 GHz Cor CH1 Markers 1: 1. 5307 1. 92000 GHz 2: 2. 0718 1. 98000 GHz 3 2 1 CENTER1 950. 000 000 MHz SPAN 600. 000 000 MHz CENTER1 950. 000 000 MHz 1 3 2 SPAN 600. 000 000 MHz Input / Output Smith Charts 24 Jan 2007 17:29:43 2. 1210 nH 1 950. 000 000 MHz 24 Jan 2007 17:29:50 1. 7326 nH 1 950. 000 000 MHz CH1 S11 1 U FS 3: 32. 660 25. 986 CH1 S22 1 U FS 3: 31. 827 21. 229 CH1Markers Cor 1: 43. 961 18. 527 1. 92000 GHz 2: 24. 907 10. 520 1. 98000 GHz 3 Cor CH1Markers 1: 69. 727 15. 898 1. 92000 GHz 2: 24. 164 -1 . 9043 1. 98000 GHz 3 2 1 1 2 CENTER 950. 000 000 MHz 1 SPAN 600. 000 000 MHz CENTER 950. 000 000 MHz 1 SPAN 600. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 5/7 SAW Bandpass Filter F1G92 Packing Specification 1. Reeling Quantity : 3000 pcs / 13" reel ( or 1000 pcs / 7" reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape 0~15 degree Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g Carrier tape I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 6/7 SAW Bandpass Filter F1G92 Carrier Tape Dimensions [unit : mm] A B C D E F 3.40 0.1 3.40 0.1 7.25 0.1 1.70 0.1 12.00 0.1 8.00 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G92 2007-01-24 NC6001-AS03 7/7 |
Price & Availability of F1G92
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |