 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTD4815N Power MOSFET Features 30 V, 35 A, Single N-Channel, DPAK/IPAK * * * * Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These are Pb-Free Devices http://onsemi.com V(BR)DSS 30 V RDS(ON) MAX 15 m @ 10 V 25 m @ 4.5 V D 35 A ID MAX Applications * CPU Power Delivery * DC--DC Converters * High Side Switching MAXIMUM RATINGS (TJ = 25C unless otherwise stated) Parameter Drain--to--Source Voltage Gate--to--Source Voltage Continuous Drain Current RJA (Note 1) Power Dissipation RJA (Note 1) Continuous Drain Current RJA (Note 2) Power Dissipation RJA (Note 2) Continuous Drain Current RJC (Note 1) Power Dissipation RJC (Note 1) Pulsed Drain Current tp=10ms Steady State TA = 25C TA = 85C TA = 25C TA = 25C TA = 85C TA = 25C TC = 25C TC = 85C TC = 25C TA = 25C TA = 25C PD IDM IDmaxPkg TJ, TSTG IS dV/dt EAS PD ID PD ID Symbol VDSS VGS ID Value 30 20 8.5 6.5 1.92 6.9 5.3 1.26 35 27 32.6 87 35 --55 to +175 27 6 60.5 W A A C A V/ns mJ W A W A Unit V V A G S N-CHANNEL MOSFET 4 4 12 1 4 3 CASE 369AA DPAK (Bent Lead) STYLE 2 2 3 CASE 369AC CASE 369D 3 IPAK IPAK (Straight Lead) (Straight Lead DPAK) 23 1 MARKING DIAGRAMS & PIN ASSIGNMENTS 4 Drain 4815NG YWW 4 Drain 4815NG YWW 4 Drain 4815NG YWW Current Limited by Package Operating Junction and Storage Temperature Source Current (Body Diode) Drain to Source dV/dt Single Pulse Drain--to--Source Avalanche Energy (VDD = 24 V, VGS = 10 V, IL = 11 Apk, L = 1.0 mH, RG = 25 ) Lead Temperature for Soldering Purposes (1/8" from case for 10 s) TL 260 C 2 1 23 1 Drain 3 Gate Source Gate Drain Source 1 2 3 Gate Drain Source Y WW 4815N G = Year = Work Week = Device Code = Pb--Free Package Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. (c) Semiconductor Components Industries, LLC, 2010 June, 2010 - Rev. 5 - 1 Publication Order Number: NTD4815N/D NTD4815N THERMAL RESISTANCE MAXIMUM RATINGS Parameter Junction--to--Case (Drain) Junction--to--TAB (Drain) Junction--to--Ambient - Steady State (Note 1) Junction--to--Ambient - Steady State (Note 2) 1. Surface--mounted on FR4 board using 1 sq--in pad, 1 oz Cu. 2. Surface--mounted on FR4 board using the minimum recommended pad size. Symbol RJC RJC--TAB RJA RJA Value 4.6 3.5 78 119 Unit C/W ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter OFF CHARACTERISTICS Drain--to--Source Breakdown Voltage Drain--to--Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current V(BR)DSS V(BR)DSS/ TJ IDSS IGSS VGS(TH) VGS(TH)/TJ RDS(on) VGS = 10 V to 11.5 V VGS = 4.5 V Forward Transconductance CHARGES AND CAPACITANCES Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Threshold Gate Charge Gate--to--Source Charge Gate--to--Drain Charge Total Gate Charge SWITCHING CHARACTERISTICS (Note 4) Turn--On Delay Time Rise Time Turn--Off Delay Time Fall Time td(ON) tr td(OFF) tf VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 10.5 21.4 11.4 3.5 ns CISS COSS CRSS QG(TOT) QG(TH) QGS QGD QG(TOT) VGS = 11.5 V, VDS = 15 V; ID = 30 A VGS = 4.5 V, VDS = 15 V; ID = 30 A VGS = 0 V, f = 1.0 MHz, VDS = 12 V 770 181 108 6.0 0.9 2.5 3.1 14.1 nC 6.6 nC pF gFS ID = 30 A ID = 15 A ID = 30 A ID = 15 A VDS = 15 V, ID = 10 A VGS = 0 V, VDS = 24 V TJ = 25 C TJ = 125C VGS = 0 V, ID = 250 mA 30 25 1 10 100 V mV/C mA nA Symbol Test Condition Min Typ Max Unit Gate--to--Source Leakage Current ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain--to--Source On Resistance VDS = 0 V, VGS = 20 V VGS = VDS, ID = 250 mA 1.5 5.6 12 11.5 21 18.3 6.0 2.5 V mV/C 15 m 25 S 3. Pulse Test: pulse width 300 ms, duty cycle 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTD4815N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter SWITCHING CHARACTERISTICS (Note 4) Turn--On Delay Time Rise Time Turn--Off Delay Time Fall Time DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD tRR ta tb QRR LS LD LD LG RG TA = 25C VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A VGS = 0 V, IS = 30 A TJ = 25C TJ = 125C 1.0 0.92 15.3 8.7 6.6 5.5 nC ns 1.2 V td(ON) tr td(OFF) tf VGS = 11.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 6.3 17.6 18.4 2.3 ns Symbol Test Condition Min Typ Max Unit Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge PACKAGE PARASITIC VALUES Source Inductance Drain Inductance, DPAK Drain Inductance, IPAK Gate Inductance Gate Resistance 2.49 0.0164 1.88 3.46 2.6 nH 3. Pulse Test: pulse width 300 ms, duty cycle 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 NTD4815N TYPICAL PERFORMANCE CURVES 60 ID, DRAIN CURRENT (AMPS) 50 40 4V 30 20 10 0 3.8 V 3.6 V 3.4 V 3.2 V 3V 0 1 2 3 4 5 80 TJ = 25C 4.5 V ID, DRAIN CURRENT (AMPS) 70 60 50 40 30 20 10 0 0 1 2 3 TJ = 125C TJ = 25C TJ = --55C 4 5 6 7 8 9 10 VGS, GATE--TO--SOURCE VOLTAGE (VOLTS) VDS 10 V 5.5 V to 10 V 5V VDS, DRAIN--TO--SOURCE VOLTAGE (VOLTS) Figure 1. On-Region Characteristics RDS(on), DRAIN--TO--SOURCE RESISTANCE () 0.030 0.025 0.020 0.015 0.010 0.005 0 ID = 30 A TJ = 25C RDS(on), DRAIN--TO--SOURCE RESISTANCE () 0.030 Figure 2. Transfer Characteristics TJ = 25C 0.025 0.020 VGS = 4.5 V 0.015 0.010 0.005 0 VGS = 11.5 V 2 3 4 5 6 7 8 9 10 11 12 5 10 15 20 25 30 VGS, GATE--TO--SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance vs. Gate- -Source -toVoltage RDS(on), DRAIN--TO--SOURCE RESISTANCE (NORMALIZED) 2.0 ID = 30 A VGS = 10 V 1.5 IDSS, LEAKAGE (nA) 10,000 100,000 Figure 4. On-Resistance vs. Drain Current and Gate Voltage VGS = 0 V TJ = 175C 1000 TJ = 125C 100 1.0 0.5 --50 --25 10 0 25 50 75 100 125 150 175 4 8 12 16 20 24 28 32 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN--TO--SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain- -Source Leakage Current -tovs. Drain Voltage http://onsemi.com 4 NTD4815N TYPICAL PERFORMANCE CURVES 1500 VDS = 0 V VGS = 0 V 1400 1300 1200 1100 Ciss 1000 900 800 700 600 500 Crss 400 300 200 100 Crss 0 5 5 10 0 10 VGS VDS 6 5 4 3 2 1 0 ID = 30 A TJ = 25C 0 1 2 3 4 5 QG, TOTAL GATE CHARGE (nC) 6 7 VDS QT Q1 Q2 VGS 16 14 12 10 8 6 4 2 0 VDS, DRAIN--TO--SOURCE VOLTAGE (VOLTS) TJ = 25C Ciss Coss 15 20 25 30 GATE--TO--SOURCE OR DRAIN--TO--SOURCE VOLTAGE (VOLTS) VGS, GATE--TO--SOURCE VOLTAGE (VOLTS) C, CAPACITANCE (pF) Figure 7. Capacitance Variation 1000 Figure 8. Gate- -Source and Drain- -Source -To-ToVoltage vs. Total Charge 30 IS, SOURCE CURRENT (AMPS) VGS = 0 V 25 20 15 10 5 0 0.4 TJ = 25C VDD = 15 V ID = 30 A VGS = 11.5 V tr t, TIME (ns) 100 td(off) 10 td(on) tf 1 1 10 RG, GATE RESISTANCE (OHMS) 100 0.5 0.6 0.7 0.8 0.9 1.0 1.1 VSD, SOURCE--TO--DRAIN VOLTAGE (VOLTS) Figure 9. Resistive Switching Time Variation vs. Gate Resistance EAS, SINGLE PULSE DRAIN--TO--SOURCE AVALANCHE ENERGY (mJ) 1000 I D, DRAIN CURRENT (AMPS) 70 60 50 40 30 20 10 0 25 Figure 10. Diode Forward Voltage vs. Current ID = 11 A 100 10 ms 100 ms VGS = 20 V SINGLE PULSE TC = 25C RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.1 1 ms 10 ms dc 10 1 0.1 1 10 VDS, DRAIN--TO--SOURCE VOLTAGE (VOLTS) 100 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) 175 Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 NTD4815N TYPICAL PERFORMANCE CURVES 100 I D, DRAIN CURRENT (AMPS) 10 125C 100C 25C 1 0.1 1 10 100 PULSE WIDTH (ms) 1000 Figure 13. Avalanche Characteristics r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 D = 0.5 0.2 0.1 0.05 0.02 0.01 SINGLE PULSE t1 0.1 P(pk) t2 DUTY CYCLE, D = t1/t2 1.0E--03 1.0E--02 t, TIME (ms) RJC(t) = r(t) RJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) -- TC = P(pk) RJC(t) 0.01 1.0E--05 1.0E--04 1.0E--01 1.0E+00 1.0E+01 Figure 14. Thermal Response ORDERING INFORMATION Device NTD4815NT4G NTD4815N--1G NTD4815N--35G Package DPAK (Pb--Free) IPAK (Pb--Free) IPAK Trimmed Lead (3.5 0.15 mm) (Pb--Free) Shipping 2500 / Tape & Reel 75 Units / Rail 75 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 6 NTD4815N PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA--01 ISSUE B C A B c2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 ------ 0.040 0.155 -----MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 -----1.01 3.93 ------ E b3 L3 1 4 A D 2 3 Z DETAIL A H L4 b2 e b 0.005 (0.13) M c C L2 GAUGE PLANE H C L L1 DETAIL A SEATING PLANE A1 ROTATED 90 CW SOLDERING FOOTPRINT* 6.20 0.244 3.00 0.118 STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN 2.58 0.102 5.80 0.228 1.60 0.063 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb--Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 NTD4815N PACKAGE DIMENSIONS 3 IPAK, STRAIGHT LEAD CASE 369AC--01 ISSUE O NOTES: 1.. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2.. CONTROLLING DIMENSION: INCH. 3. SEATING PLANE IS ON TOP OF DAMBAR POSITION. 4. DIMENSION A DOES NOT INCLUDE DAMBAR POSITION OR MOLD GATE. DIM A B C D E F G H J K R V W INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.043 0.090 BSC 0.034 0.040 0.018 0.023 0.134 0.142 0.180 0.215 0.035 0.050 0.000 0.010 MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.09 2.29 BSC 0.87 1.01 0.46 0.58 3.40 3.60 4.57 5.46 0.89 1.27 0.000 0.25 B V R C E A SEATING PLANE W F G K J D H 3 PL 0.13 (0.005) W IPAK (STRAIGHT LEAD DPAK) CASE 369D--01 ISSUE B B V R 4 C E Z NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D E F G H J K R S V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 -----MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 ------ S --TSEATING PLANE A 1 2 3 K F D G 3 PL J H M 0.13 (0.005) T STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303--675--2175 or 800--344--3860 Toll Free USA/Canada Fax: 303--675--2176 or 800--344--3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800--282--9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81--3--5773--3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 8 NTD4815N/D |
Price & Availability of NTD4815N-35G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |