 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PROFESSIONAL LED INDICATORS O12.7mm Mounting FEATURES Each product will operate over a wide voltage input range 533 SERIES PACK QUANTITY = 10 PIECES Bright nickel plated brass housing 180 viewing angle Full internal potting to resist shock and vibration Sealed to IP67 True Bi-polar product SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH p (nm) TEMP T opr TEMP T stg HIGH INTENSITY 533-105-63 533-102-63 533-111-63 533-114-63 533-105-75 533-102-75 533-111-75 533-114-75 UNITS Red Red (GaAlAs) Yellow Green Red Red (GaAlAs) Yellow Green Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12-28 12-28 12-28 12-28 110Vac 110Vac 110Vac 110Vac Vac/Vdc 6-16 6-16 6-16 6-16 6 6 6 6 mA 100 450 50 60 100 450 50 60 mcd 627 660 590 565 627 660 590 565 nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ C -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 C Yes Yes Yes Yes Yes Yes Yes Yes 105,102,111 & 114 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk * email: sales@marl.co.uk * * T elephone +44 (0)1229 582430 * Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply (c) MARL INTERNATIONAL LTD 2007 : DS 068/07 Issue 2 SAMPLES AVAILABLE Page 1 of 3 533 Series Below 50Vac/dc Above 50Vac/dc Mounting Hole Dimensions in mm (Typical) Not to scale Mounting hole to be clean and burr free MATERIALS Body Nut Panel Seal T ermination Lock Washer Fresnel lens Encapsulation Header Nickel plated brass to BS 2874 CZ121 Stainless Steel grade 303 Viton Copper with silver flash finish Zinc plated steel Polycarbonate PC5430 Nylon6 A82 PUSH-ON CONNECTORS 925-000-00 is brass tin plated. Dimensions in mm (Typical) Not to scale For use with 533 series lamps. TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL NUT MINIMUM MIN/MAX. DISSIPATION 533 825 mW POWER CUTOUT TORQUE 1.0 Nm MOUNTING CENTRES x,y=19.5 mm MOUNTING THICKNESS 1.5-8.0 mm PANEL 12.7 mm How to Order: website: www.marl.co.uk * email: sales@marl.co.uk * * T elephone +44 (0)1229 582430 * Fax: +44 (0)1229 585155 BS EN ISO 9001:2000 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer (c) MARL INTERNATIONAL LTD 2007 : DS 068/07 Issue 2 SAMPLES AVAILABLE Page 2 of 3 |
Price & Availability of 533-111-63
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |