|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MBRB1045, MBRD1045 Preferred Device SWITCHMODEt Schottky Power Rectifier Surface Mount Power Package This series of Power Rectifiers employs the Schottky Barrier principle in a large metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. Features http://onsemi.com SCHOTTKY BARRIER RECTIFIER 10 AMPERES, 45 VOLTS 1 4 3 * * * * * * Guardring for Stress Protection Low Forward Voltage 175C Operating Junction Temperature Epoxy Meets UL 94 V-0 @ 0.125 in Short Heat Sink Tab Manufactured - Not Sheared! Pb-Free Packages are Available 1 3 MARKING DIAGRAM 4 AY WW MBRB1045G AKA Mechanical Characteristics: * Case: Epoxy, Molded, Epoxy Meets UL 94 V-0 * Weight: 1.7 grams for D2PAK (approximately) * * * * 0.4 grams for DPAK (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Device Meets MSL1 Requirements ESD Ratings: Machine Model, C (>400 V) Human Body Model, 3B (>8000 V) Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) TC = 135C Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 135C Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction and Storage Temperature Range (Note 1) Symbol VRRM VRWM VR IF(AV) IFRM Value 45 Unit V D2PAK CASE 418B PLASTIC A Y WW MBRB1045 G AKA 4 12 3 DPAK CASE 369C Y WW B1045 G = Assembly Location = Year = Work Week = Device Code = Pb-Free Package = Diode Polarity MAXIMUM RATINGS MARKING DIAGRAM YWW B10 45G 10 20 A A IFSM 150 (MBRB) 70 (MBRD) -65 to +175 A = Year = Work Week = Device Code = Pb-Free Package TJ, Tstg C ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Voltage Rate of Change (Rated VR) dv/dt 10000 V/ms Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ < 1/RqJA. (c) Semiconductor Components Industries, LLC, 2006 Preferred devices are recommended choices for future use and best overall value. 1 February, 2006 - Rev. 6 Publication Order Number: MBRB1045/D MBRB1045, MBRD1045 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, (MBRB1045) - Junction-to-Case (Note 2) - Junction-to-Ambient (Note 2) (MBRD1045) - Junction-to-Case (Note 2) - Junction-to-Ambient (Note 2) 2. When mounted using minimum recommended pad size on FR-4 board. Symbol RqJC RqJA RqJC RqJA Value 1.0 50 2.43 68 Unit C/W ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 3) (IF = 10 Amps, TJ = 125C) (IF = 20 Amps, TJ = 125C) (IF = 20 Amps, TJ = 25C) Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 125C) (Rated dc Voltage, TJ = 25C) 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0% Symbol VF 0.57 0.72 0.84 IR 15 0.1 mA Value Unit V ORDERING INFORMATION Device MBRB1045 MBRB1045G MBRB1045T4 MBRB1045T4G MBRD1045T4G Package D2PAK D2PAK (Pb-Free) D2PAK D2PAK (Pb-Free) DPAK (Pb-Free) Shipping 50 Units / Rail 50 Units / Rail 800 Units / Tape & Reel 800 Units / Tape & Reel 2500 Units / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MBRB1045, MBRD1045 100 70 50 30 20 iF, INSTANTANEOUS FORWARD CURRENT (AMPS) iF, INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150C 100C 25C 100 TJ = 150C 70 50 30 20 100C 25C 10 7.0 5.0 3.0 2.0 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 3 MBRB1045, MBRD1045 100 TJ = 150C IR , REVERSE CURRENT (mA) IR , REVERSE CURRENT (mA) 10 1.0 125C 100C 75C 10 125C 1.0 100C 75C 100 150C 0.1 25C 0.01 0.1 0.01 25C 0.001 0 5.0 10 15 20 25 30 35 40 45 50 0 5.0 10 15 20 25 30 35 40 45 50 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) 0.001 Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current IFSM , PEAK HALF-WAVE CURRENT (AMPS) 200 1400 1200 C, CAPACITANCE (pF) 1000 800 600 400 200 0 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 0 10 20 30 40 50 NUMBER OF CYCLES AT 60 Hz VR, REVERSE VOLTAGE (VOLTS) 100 70 50 30 20 Figure 8. Maximum Surge Capability PF(AV) , AVERAGE FORWARD POWER DISSIPATION (WATTS) Figure 5. Typical Capacitance IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 18 16 14 12 10 8.0 6.0 4.0 2.0 0 130 135 140 145 150 155 TC, CASE TEMPERATURE (C) SQUARE WAVE RATED VOLTAGE APPLIED dc 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 18 IF(AV), AVERAGE FORWARD CURRENT (AMPS) SQUARE WAVE dc Figure 6. Current Derating, Case, RqJC = 1.0 C/W Figure 7. Forward Power Dissipation http://onsemi.com 4 MBRB1045, MBRD1045 PACKAGE DIMENSIONS D2PAK 3 CASE 418B-04 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B-01 THRU 418B-03 OBSOLETE, NEW STANDARD 418B-04. DIM A B C D E F G H J K L M N P R S V INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 C E -B- 4 V W A 1 2 3 S -T- SEATING PLANE K G D H 3 PL M W J 0.13 (0.005) VARIABLE CONFIGURATION ZONE L M TB M R N U L P L M M F VIEW W-W 1 F VIEW W-W 2 F VIEW W-W 3 SOLDERING FOOTPRINT* 8.38 0.33 10.66 0.42 1.016 0.04 5.08 0.20 3.05 0.12 17.02 0.67 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 MBRB1045, MBRD1045 PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369C ISSUE O NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 --- 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 --- 0.89 1.27 3.93 --- -T- B V R 4 SEATING PLANE C E A S 1 2 3 Z U K F L D G 2 PL J H 0.13 (0.005) T DIM A B C D E F G H J K L R S U V Z M SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 3.0 0.118 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MBRB1045/D |
Price & Availability of MBRB1045T4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |