|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Dielectric Resonator Oscillator AFC Voltage Tunable Specifications (1) Model MDR3100 2.5 to 21.0 GHz : 2.5-6.0 GHz 10 MHz 5 ppm/C 100 ppm 20 ppm/Volt -15 dBc -70 dBc +10 dBm 6 GHz -97 -122 -142 6.0-21.0 GHz 20 MHz 5 ppm/C 100 ppm 20 ppm/Volt -15 dBc -70 dBc +10 dBm 12 GHz -91 -116 -136 Frequency (GHz) 2.5 to 5.0 4.0 to 10.0 10.0 to 14.0 14.0 to 21.0 Outline DA3A DA2A DB1A DA6A Frequency Range: Mechanical Tuning Bandwidth (min.) Stability (max.)(3) Pulling, 12 dB RL (max.) Pushing (max.) Harmonics (max.) Spurious (max.) Output Power (min.) (4) Phase Noise (typ.) 10 kHz Offset, dBc/Hz 100 kHz Offset, dBc/Hz 1 MHz Offset, dBc/Hz AFC Tuning BW (min) AFC Tuning Voltage(5) AFC Tuning Impedance Input DC(6) Operating Temperature RF Connector DC Connector 3 GHz -103 -128 -148 (2) 20 GHz -83 -108 -128 2.5 - 10.0 GHz: 800 ppm 10.0 - 21.0 GHz: 600 ppm +2 to +10 VDC Parallel R-C 10K min./300 pf max +12 VDC 3% @ 125 mA max. -20 to +65 C SMA Female Solder Pin PRODUCT LABEL AREA THIS SURFACE AFC INPUT "C" SMA-FEMALE "J" DIA THRU 4 PLACES "S" MAX "F" "E" "G" "P" MAX "N" MAX "M" "U" "A" "L" "H" "D" GND VDC "I" FREQ ADJUST COARSE FINE NOTE 1 "B" "R" RF OUTPUT SMA-FEMALE "K" 1. Outline DD4 uses a seperate adjustment screw for coarse and fine tune vs. the concentric adjustment shown. DIMENSIONS: INCHES DIM OUTLINE "DA2A" "DA3A" "DB1A" "DA6A" "A" 1.75 1.75 1.65 1.65 "B" 1.60 2.00 1.18 1.46 "C" .12 .12 .15 .15 "D" 1.500 1.500 1.350 1.350 "E" .30 .50 .22 .36 "F" 1.000 1.000 .750 .726 "G" .25 .25 .32 .32 "H" 1.25 1.25 1.00 1.00 "J" .125 .125 .125 .140 "K" .83 .83 .84 .83 "L" .98 .96 .77 .71 "M" .19 .19 .19 .16 "N" 1.70 1.75 1.55 1.55 "P" 2.00 2.00 1.55 1.70 "R" .38 .38 .38 .38 "S" .40 .40 .40 .40 "T" 1.00 1.00 .89 .83 "U" .53 .53 .77 .71 DIMENSIONS: METRIC DIM OUTLINE "DA2A" "DA3A" "DB1A" "DA6A" "A" 44.5 44.5 41.9 41.9 "B" 40.6 50.8 30.0 37.1 "C" 3.0 3.0 3.8 3.8 "D" 38.10 38.10 34.29 34.29 "E" 7.6 12.7 5.6 9.1 "F" 25.40 25.40 18.42 18.44 "G" 6.4 6.4 8.1 8.1 "H" 31.8 31.8 25.4 25.4 "J" 3.2 3.2 3.2 3.6 "K" 21.1 21.1 21.3 21.1 "L" 24.9 24.4 19.6 18.0 "M" 4.8 4.8 4.8 4.0 "N" 43.2 44.5 39.4 39.4 "P" 50.8 50.8 39.4 43.2 "R" 9.7 9.7 9.7 9.7 "S" 10.2 10.2 10.2 10.2 "T" 25.4 25.4 22.6 21.1 "U" 13.5 13.5 19.6 18.0 All dimensions are in inches and [mm]. SP ECTRU INC. MICROWAVE A Spectrum Control Business SPECTRUM MICROWAVE * 2144 Franklin Drive N.E. * Palm Bay, Florida 32905 * Phone: (888) 553-7531 * Fax: (888) 553-7532 785 www.specwave.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 DROs Notes: 1. Specifications labeled "min." or "max." are guaranteed in a 50 Ohm system over the specified temperature range. 2. Output frequency must be specified. 3. Averaged over the full temperature range. 4. Higher output power is available. 5. Other tuning voltages are available. 6. Other input voltages are available. 7. Package must be verified by Spectrum Microwave. M |
Price & Availability of MDR3100 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |