|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff. notice_e-01 WOUND CHIP INDUCTORS (LB SERIES) REFLOW FEATURES Wound Chip Inductors cover customers' wide range module designs by wide-line-up shape, standard, low Rdc, and high electric current series. B/LBR SeriesSuper low Rdc and high Idc characteristics. L LB3218 Series This series is downsized from 3225 size. Land pattern can be used by 3225 size. LBMF1608 The best efficiency design is achieved by adopting bottom-surface electrode structure. Because of 1608 shape, it can be high-density mounting. APPLICATIONS SC/DVC/HDD, LCD, portable telephones, game equipments. D Various audio-visual equipments, various communication equipments, etc. ORDERING CODE L LB B 2 0 1 T 2 T 1 0 0 Special code Standard products Low Rdc R type Internal code Standard Products Blank space Type Wound chip inductor Shape Standard products High current Low Rdc Bottom-surface electrode C R MF External Dimensions mm 1608 0603 1.6x0.8 2012 0805 2.0x1.25 2016 0806 2.0x1.6 2518 1007 2.5x1.8 3218 1207 3.2x1.8 3225 1210 3.2x1.5 Packaging Tape & Reel Nominal Inductance H example 1R0 1 100 10 101 100 R=decimal point Inductance Tolerances K 10 M 20 EXTERNAL DIMENSIONS/STANDARD QUANTITY EXTERNAL DIMENSIONS C Type LBC3225 L W T e Standard Quantity [pcs] Paper Embossed Tape Tape 4000 1000 2000 2000 2000 2000 3000 Unitmm inch 3.20.2 2.50.2 2.50.2 0.60.3 0.1280.008 0.0980.008 0.0980.008 0.0240.012 3.20.2 1.80.2 1.80.2 0.60.2 0.1280.008 0.0710.008 0.0710.008 0.0240.008 2.50.2 1.80.2 1.80.2 0.50.2 0.0980.008 0.0710.008 0.0710.008 0.0200.008 2.00.2 1.60.2 1.60.2 0.50.2 0.0790.008 0.0630.008 0.0630.008 0.0200.008 2.00.2 1.250.2 1.250.2 0.50.2 0.0790.008 0.0490.008 0.0490.008 0.0200.008 1.60.1 0.80.1 0.80.1 0.350.15 0.0630.004 0.0310.004 0.0310.004 0.0140.006 1.60.2 0.80.2 0.80.2 0.450.15 0.0630.008 0.0310.008 0.0310.008 0.0160.006 A B A LB3218 Unitmm C 1.0 0.9 1.45 1.8 2.0 2.0 2.0 LB2518 LBC2518 LBR2518 LB2016 LBC2016 LB2012 LBC2012 LBR2012 LB1608 LBMF1608 TYPE 1608 MF1608 2012 2016 2518 3218 3225 A 0.55 0.55 0.7 0.7 0.8 1.0 1.0 B 0.7 0.8 0.8 0.8 1.2 1.6 1.6 Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to those products is reflow soldering only. Recommended Land Patterns AVAILABLE CAPACITANCE RANGE Type Range LB3218 LB2518 LB2016 LB2012 LB1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 LBMF1608 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 Imax. Rdc30 mA mA mA mA mA mA mA mA mA mA mA mA 1 Inductance H 1075 1H 0.06 665 1H 0.06 490 1H 0.09 405 1H 0.15 160 1H 0.17 1100 1H 0.055 775 1H 0.08 690 1H 70 10 340 0.25 165 0.25 155 0.5 120 0.7 60 10H 140 2.40 60 2.1 40 4.5 100H 45 100H 7.0 150 1.4 100H 125 3.70 680 45 H 28.0 680H 75 8.0 100H 0.55 0.7 540 0.133 375 0.36 245 0.82 200 90 47H 1.2 5.8 80 1.89 100H 50 4.0 100H 235 0.19 150 0.36 80 35 47H 0.36 2.5 0.1 620 1H 0.19 960 1H 0.045 400 1H 0.07 230 1H 0.09 100 1000 40 27 1000H 15 24 1000H This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 42 wound01_e-01 PART NUMBERS LB1608 TYPE Ordering code LB 1608T1R0M LB 1608T2R2M LB 1608T4R7M LB 1608T8R2M LB 1608T100M EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 4.7 8.2 10 Inductance Tolerance Self-resonant frequency MHz min. 100 80 45 32 32 DC Resistance 30 0.17 0.33 0.55 0.70 0.70 Rated current mA max. 160 115 70 60 60 Measuring frequency MHz 7.96 20% 2.52 LB2012 TYPE Ordering code LB 2012T1R0M LB 2012T2R2M LB 2012T3R3M LB 2012T4R7M LB 2012T6R8M LB 2012T100 LB 2012T100R LB 2012T150 LB 2012T220 LB 2012T470 LB 2012T680 LB 2012T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 3.3 4.7 6.8 10 10 15 22 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 55 45 38 32 32 28 16 11 10 8 DC Resistance 30 0.15 0.23 0.30 0.40 0.47 0.70 0.50 1.3 1.7 3.7 6.0 7.0 Rated current mA max. 405 260 235 190 135 120 120 100 80 60 50 45 Measuring frequency MHz FERRITE PRODUCTS 20% 7.96 10% 20% 2.52 0.796 LB2016 TYPE Ordering code LB 2016T1R0M LB 2016T1R5M LB 2016T2R2M LB 2016T3R3M LB 2016T4R7M LB 2016T6R8M LB 2016T100 LB 2016T150 LB 2016T220 LB 2016T330 LB 2016T470 LB 2016T680 LB 2016T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 70 55 45 38 32 28 16 14 11 10 8 DC Resistance 30 0.09 0.11 0.13 0.20 0.25 0.35 0.50 0.70 1.0 1.7 2.4 3.0 4.5 Rated current mA max. 490 380 375 285 225 200 155 130 105 85 70 55 40 Measuring frequency MHz 20% 7.96 10% 20% 2.52 0.796 LB2518 TYPE EHS Environmental Hazardous Substances LB 2518T1R0M RoHS LB 2518T1R5M RoHS LB 2518T2R2M RoHS LB 2518T3R3M RoHS LB 2518T4R7M RoHS LB 2518T4R7MR RoHS LB 2518T6R8M RoHS LB 2518T100 RoHS LB 2518T150 RoHS LB 2518T220 RoHS LB 2518T330 RoHS LB 2518T470 RoHS LB 2518T680 RoHS LB 2518T101 RoHS LB 2518T151 RoHS LB 2518T221 RoHS LB 2518T331 RoHS LB 2518T471 RoHS LB 2518T681 RoHS LB 2518T102 RoHS Please specify the Inductance tolerance code K or M Ordering code Inductance H 1.0 1.5 2.2 3.3 4.7 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Inductance Tolerance Self-resonant frequency MHz min. 100 80 68 54 46 46 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 3.5 3.0 2.4 DC Resistance 30 0.06 0.07 0.09 0.11 0.13 0.10 0.15 0.25 0.32 0.50 0.70 0.95 1.5 2.1 3.2 4.5 7.0 10 17 24 Rated current mA max. 665 405 340 280 240 235 195 165 145 115 95 85 70 60 45 40 30 25 20 15 Measuring frequency MHz 20% 7.96 2.52 10% 20% 0.796 0.252 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound01_e-01 43 PART NUMBERS LB3218 TYPE Ordering code LB 3218T1R0M LB 3218T1R5M LB 3218T2R2M LB 3218T3R3M LB 3218T4R7M LB 3218T6R8M LB 3218T100 LB 3218T150 LB 3218T220 LB 3218T330 LB 3218T470 LB 3218T680 LB 3218T101 LB 3218T151 LB 3218T221 LB 3218T331 LB 3218T471 LB 3218T681 LB 3218T102 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Inductance Tolerance Self-resonant frequency MHz min. 100 80 68 54 41 40 30 25 19 15 12 11 8.0 7.0 5.0 4.0 3.5 3.0 2.4 DC Resistance 30 0.06 0.07 0.09 0.11 0.13 0.17 0.25 0.32 0.49 0.75 0.92 1.49 2.4 3.2 5.4 7.0 14 17 27 Rated current mA max. 1075 860 775 560 550 380 340 300 255 215 205 145 140 105 80 65 54 45 39 Measuring frequency MHz 20% 7.96 2.52 10% 20% 0.796 0.252 LBMF1608 TYPE Ordering code LBMF1608T1R0M LBMF1608T2R2M LBMF1608T3R3M LBMF1608T4R7M LBMF1608T100 LBMF1608T220 LBMF1608T470 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 3.3 4.7 10 22 47 Inductance Tolerance Self-resonant frequency MHz min. 100 80 60 45 32 16 11 DC Resistance 30 0.09 0.17 0.22 0.24 0.36 1.0 2.5 Rated current mA max. 230 160 130 110 80 50 35 Measuring frequency MHz 20% 7.96 10% 20% 2.52 LBC3225 TYPE Ordering code LB C3225T1R0MR LB C3225T1R5MR LB C3225T2R2MR LB C3225T3R3MR LB C3225T4R7MR LB C3225T6R8MR LB C3225T100R LB C3225T150R LB C3225T220R LB C3225T330R LB C3225T470R LB C3225T680R LB C3225T101R EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 250 220 190 160 70 50 23 20 17 13 10 8 6 DC Resistance 30 0.055 0.060 0.080 0.095 0.100 0.120 0.133 0.195 0.270 0.410 0.670 1.00 1.40 Rated current mA max. 1100 1000 930 820 680 620 540 420 330 300 220 190 150 Measuring frequency MHz 20% 0.1 10% 20% LBC2518 TYPE EHS Environmental Hazardous Substances LB C2518T1R0M RoHS LB C2518T1R0MR RoHS LB C2518T1R5M RoHS LB C2518T2R2M RoHS LB C2518T3R3M RoHS LB C2518T4R7M RoHS LB C2518T6R8M RoHS LB C2518T100 RoHS LB C2518T150 RoHS LB C2518T220 RoHS LB C2518T330 RoHS LB C2518T470 RoHS LB C2518T680 RoHS LB C2518T101 RoHS LB C2518T151 RoHS LB C2518T221 RoHS LB C2518T331 RoHS LB C2518T471 RoHS LB C2518T681 RoHS Please specify the Inductance tolerance code K or M Ordering code Inductance H 1.0 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 Inductance Tolerance Self-resonant frequency MHz min. 100 100 80 68 54 41 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 4.5 3.0 DC Resistance 30 0.08 0.065 0.11 0.13 0.16 0.20 0.30 0.36 0.65 0.77 1.5 1.9 2.8 3.7 6.1 8.4 12.3 22 28 Rated current mA max. 775 890 730 630 560 510 420 375 285 250 185 165 140 125 95 80 65 50 45 Measuring frequency MHz 20% 7.96 2.52 10% 20% 0.796 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 44 wound01_e-01 PART NUMBERS LBC2016 TYPE Ordering code LB C2016T1R0M LB C2016T1R5M LB C2016T2R2M LB C2016T3R3M LB C2016T4R7M LB C2016T6R8M LB C2016T100 LB C2016T150 LB C2016T220 LB C2016T330 LB C2016T470 LB C2016T680 LB C2016T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 70 55 45 38 32 28 16 14 11 10 8 DC Resistance 30 0.10 0.15 0.20 0.27 0.37 0.59 0.82 1.2 1.8 2.8 4.3 7.0 8.0 Rated current mA max. 690 600 520 410 355 290 245 200 165 135 110 95 75 Measuring frequency MHz 20% 7.96 10% 20% 2.52 0.796 FERRITE PRODUCTS LBC2012 TYPE Ordering code LB C2012T1R0M LB C2012T2R2M LB C2012T4R7M LB C2012T100 LB C2012T220 LB C2012T470 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 4.7 10 22 47 Inductance Tolerance Self-resonant frequency MHz min. 100 70 45 40 16 11 DC Resistance 30 0.19 0.33 0.50 1.2 3.7 5.8 Rated current mA max. 620 430 295 200 130 90 Measuring frequency MHz 7.96 20% 10% 20% 2.52 LBR2518 TYPE Ordering code LB R2518T1R0M LB R2518T2R2M LB R2518T4R7M LB R2518T100 LB R2518T220 LB R2518T470 LB R2518T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 4.7 10 22 47 100 Inductance Tolerance Self-resonant frequency MHz min. 100 68 45 30 19 11 9 DC Resistance 30 0.045 0.07 0.10 0.19 0.44 0.84 1.89 Rated current mA max. 960 480 345 235 175 120 80 Measuring frequency MHz 7.96 20% 10% 20% 2.52 0.796 LBR2012 TYPE EHS Environmental Hazardous Substances LB R2012T1R0M RoHS LB R2012T2R2M RoHS LB R2012T4R7M RoHS LB R2012T100 RoHS LB R2012T220 RoHS LB R2012T470 RoHS LB R2012T101 RoHS Please specify the Inductance tolerance code K or M Ordering code Inductance H 1.0 2.2 4.7 10 22 47 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 45 32 16 11 8 DC Resistance 30 0.07 0.13 0.24 0.36 1.0 1.7 4.0 Rated current mA max. 400 260 200 150 100 75 50 Measuring frequency MHz 7.96 20% 10% 20% 2.52 0.796 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound01_e-01 45 ELECTRICAL CHARACTERISTICS Measured by HP4285A42841A DC Bias characteristics LB1608 100 1000 101 H LB2012 1000 LB2016 1000 Standard Type LB2518 10 100M H Inductance 100 100 101 H 100 101 H Inductance Inductance 10 10 Inductance 100 100 10 100 1 1R0M 1 1R0M 1 1R0M 1 1R0M 0.1 1 10 DC Bias 100 mA 1000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 Standard Type LB3218 1000 100 470 100 H 101 10 H H 100 100 LBC2012 1000 High Current Type LBC2016 1000 LBC2518 101 H 100 101 Inductance Inductance Inductance 10 10 Inductance 100 100 10 100 1R0M 1 1 1R0M 1 1R0M 1 1R0M 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 DC Bias 100 mA 1000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 High Current Type 3225 100 1000 101 LBR2012 Low Rdc Type LBR2518 1000 Bottom-surface electrode Type LBMF1608 10 100 4R7M H H H H 10 100 100 101 100 101 100 Inductance Inductance Inductance Inductance 10 1 1R0M 1 1R0MR 10 100 1 1R0M 1R0M 0.1 1 10 100 1000 DC Bias mA 10000 1 1 10 DC Bias 100 mA 1000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 DC Bias 100 mA 1000 Measured by HP4291A Impedance-vs-Frequency characteristics LB1608 10000 100M 1000 1R0M 10000 1000 Impedance Impedance Impedance 100 100 100000 101 100 1R0M LB2012 100000 10000 1000 100 101 100 1R0M LB2016 Standard Type LB2518 100000 10000 1000 Impedance 100 10 1 101 100 1R0M 10 10 1 10 1 1 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 Standard Type LB3218 100000 101 10000 1000 Impedance Impedance 100 10 1 100 1R0M 1000 Impedance 100 10 1 10000 100000 470 100 1R0M 1000 100 10 1 10000 LBC2012 100000 High Current Type LBC2016 101 100 1R0M 1000 Impedance 100000 101 LBC2518 10000 100 1R0M 100 10 1 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 High Current Type LBC3325 100000 10000 1000 1000 Impedance Impedance 100 10 1 0.1 0.1 100 10 1 101 R 100 R 1R0MR Low Rdc Type LBR2012 100000 101 10000 100 1R0M Impedance 10000 1000 Impedance 100 10 1 100000 101 100 1R0M LBR2518 Bottom-surface electrode Type LBMF1608 100000 470 10000 100 4R7M 1000 100 10 1 1 10 100 1000 10000 Frequency MHz 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 1 10 100 1000 Frequency MHz 10000 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 46 wound01_e-01 WOUND CHIP POWER INDUCTORS (CB SERIES) REFLOW FEATURES his series corresponds to high electric current compared with LB/ T LBC series. Wound Chip Inductors that can be used for small DC/DC converters and are suitable for choke uses. BMF 1608 Series C The best efficiency design is achieved by adopting bottom-surface electrode structure. Wound Chip Inductors that are suitable for module design which needs high electric current like DC/DC converters. APPLICATIONS SC/DVC/HDD, LCD, portable telephones, game equipment. D Various audio-visual equipment, various communication equipment, etc. ORDERING CODE C CB B 2 0 1 T 2 T 1 0 0 Special code Standard products Low Rdc R type Internal code Standard Products Blank space Type Wound chip power inductor Characteristic Spec Low Rdc High current Low profile Bottom-surface electrode C L MF External Dimensions mm 1608 0603 1.6x0.8 2012 0805 2.0x1.25 2016 0806 2.0x1.6 2518 1007 2.5x1.8 3225 1210 3.2x2.5 Packaging Tape & Reel Nominal Inductance H example 1R0 1 100 10 101 100 R=decimal point Inductance Tolerances K 10 M 20 EXTERNAL DIMENSIONS/STANDARD QUANTITY Type C L W T e Standard Quantity [pcs] Paper Embossed Tape Tape 4000 1000 2000 2000 2000 3000 Unitmm inch CBC3225 A B A 3.20.2 2.50.2 2.50.2 0.60.3 0.1260.008 0.0980.008 0.0980.008 0.0240.012 2.50.2 1.80.2 1.80.2 0.50.2 0.0980.008 0.0710.008 0.0710.008 0.0200.008 2.00.2 1.60.2 1.60.2 0.50.2 0.0790.008 0.0630.008 0.0630.008 0.0200.008 2.00.2 1.250.2 1.250.2 0.50.2 0.0790.008 0.0490.008 0.0490.008 0.0200.008 2.00.2 1.250.2 0.90.1 0.50.2 0.0790.008 0.0490.008 0.0350.004 0.0200.008 1.60.2 0.80.2 0.80.2 0.450.15 0.0630.2 0.0310.008 0.0310.008 0.0160.006 CB2518 CBC2518 CB2016 CBC2016 CB2012 CBC2012 CBL2012 CBMF1608 TYPE 1608 MF1608 2012 2016 2518 3225 A 0.55 0.55 0.7 0.7 0.8 1.0 B 0.7 0.8 0.8 0.8 1.2 1.6 Unitmm C 1.0 0.9 1.45 1.8 2.0 2.0 Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to those products is reflow soldering only. Recommended Land Patterns AVAILABLE CAPACITANCE RANGE Type Range CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBC2012 CBMF1608 Imax mA Rdc30 Imax mA Rdc30 Imax mA Rdc30 Imax mA Rdc30 Imax mA Rdc30 Imax Rdc30 Imax mA mA Rdc30 Imax mA Rdc30 Imax mA Rdc30 1 1200 1H 0.06 600 1H 0.09 500 1H 0.15 1440 1H 0.055 1000 1H 0.08 1100 1H 0.1 700 1H 0.19 620 1H 0.15 350 1H 0.09 22 510 10 250 47 110 100 60 0.09 2.40 0.95 2.1 510 250 110 70 100H 1000 25 1000H 24 0.13 0.5 2.4 4.5 410 200 90 60 100H 0.23 0.5 3.7 7 1130 900 390 270 100H 0.08 0.133 0.67 1.4 890 480 240 160 65 680H 0.13 0.36 1.90 3.7 28 750 380 150 110 100H 0.2 0.82 4.3 8 530 240 120 47H 0.33 1.2 5.8 530 440 100 47H 0.33 1.0 4.2 230 115 50 47H 0.17 0.36 2.5 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 48 Inductance H wound02_e-01 PART NUMBERS CB2012 TYPE Ordering code CB 2012T1R0M CB 2012T2R2M CB 2012T3R3M CB 2012T4R7M CB 2012T6R8M CB 2012T100 CB 2012T100R CB 2012T150 CB 2012T220 CB 2012T470 CB 2012T680 CB 2012T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 3.3 4.7 6.8 10 10 15 22 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 55 45 38 32 32 28 16 11 10 8 Resistance DC 30 0.15 0.23 0.30 0.40 0.47 0.70 0.50 1.3 1.7 3.7 6.0 7.0 Saturation current Idc1 Rated current mA Temperature rise current Idc2 500 900 410 770 330 650 300 580 250 540 190 440 200 520 170 320 135 280 90 190 70 140 60 130 Measuring frequency MHz 20% 7.96 10% 20% 2.52 0.796 FERRITE PRODUCTS CB2016 TYPE Ordering code CB 2016T1R0M CB 2016T1R5M CB 2016T2R2M CB 2016T3R3M CB 2016T4R7M CB 2016T6R8M CB 2016T100 CB 2016T150 CB 2016T220 CB 2016T330 CB 2016T470 CB 2016T680 CB 2016T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 70 55 45 38 32 28 16 14 11 10 8 Resistance DC 30 0.09 0.11 0.13 0.20 0.25 0.35 0.50 0.70 1.0 1.7 2.4 3.0 4.5 Saturation current Idc1 Rated current mA Temperature rise current Idc2 600 1100 550 1000 510 1000 400 800 340 740 300 600 250 520 210 440 165 370 130 270 110 240 90 210 70 170 Measuring frequency MHz 20% 7.96 10% 20% 2.52 0.796 CB2518 TYPE Ordering code CB 2518T1R0M CB 2518T1R5M CB 2518T2R2M CB 2518T3R3M CB 2518T4R7MR CB 2518T4R7M CB 2518T6R8M CB 2518T100 CB 2518T150 CB 2518T220 CB 2518T330 CB 2518T470 CB 2518T680 CB 2518T101 CB 2518T151 CB 2518T221 CB 2518T331 CB 2518T471 CB 2518T681 CB 2518T102 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Inductance Tolerance Self-resonant frequency MHz min. 100 80 68 54 46 46 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 3.5 3.0 2.4 Resistance DC 30 0.06 0.07 0.09 0.11 0.10 0.13 0.15 0.25 0.32 0.50 0.70 0.95 1.5 2.1 3.2 4.5 7.0 10 17 24 Saturation current Idc1 Rated current mA Temperature rise current Idc2 1200 1500 650 1400 510 1300 440 1200 310 1200 340 1100 270 930 250 820 180 650 165 580 130 460 110 420 70 310 60 260 55 210 50 180 40 140 35 120 30 90 25 75 Measuring frequency MHz 20% 7.96 2.52 10% 20% 0.796 0.252 CBC2012 TYPE Ordering code CB C2012T1R0M CB C2012T2R2M CB C2012T4R7M CB C2012T100 CB C2012T220 CB C2012T470 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 4.7 10 22 47 Inductance Tolerance Self-resonant frequency MHz min. 100 70 45 40 16 11 Resistance DC 30 0.19 0.33 0.50 1.2 3.7 5.8 Saturation current Idc1 Rated current mA Temperature rise current Idc2 700 840 530 640 360 520 240 340 170 190 120 150 Measuring frequency MHz 20% 10% 20% 7.96 2.52 Please specify the Inductance tolerance code or saturation current value Idc1 the DC current value having inductance decrease down to 30%. The is at 20 at 20 temperature rise current value Idc2 the DC current value having temperature increase up to 40. The is maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound02_e-01 49 PART NUMBERS CBC2016 TYPE Ordering code CB C2016T1R0M CB C2016T1R5M CB C2016T2R2M CB C2016T3R3M CB C2016T4R7M CB C2016T6R8M CB C2016T100 CB C2016T150 CB C2016T220 CB C2016T330 CB C2016T470 CB C2016T680 CB C2016T101 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 100 80 70 55 45 38 32 28 16 14 11 10 8 Resistance DC 30 0.10 0.15 0.20 0.27 0.37 0.59 0.82 1.2 1.8 2.8 4.3 7.0 8.0 Rated current mA Temperature rise current Idc2 1100 1100 1000 1000 750 720 600 610 550 530 450 450 380 350 300 300 250 240 220 220 150 150 130 130 110 110 Measuring frequency MHz Saturation current Idc1 20% 7.96 10% 20% 2.52 0.796 CBC2518 TYPE Ordering code CB C2518T1R0M CB C2518T1R5M CB C2518T2R2M CB C2518T3R3M CB C2518T4R7M CB C2518T6R8M CB C2518T100 CB C2518T150 CB C2518T220 CB C2518T330 CB C2518T470 CB C2518T680 CB C2518T101 CB C2518T151 CB C2518T221 CB C2518T331 CB C2518T471 CB C2518T681 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 Inductance Tolerance Self-resonant frequency MHz min. 100 80 68 54 41 38 30 23 19 15 12 9.5 9.0 7.0 5.5 4.5 3.5 3.0 Resistance DC 30 0.08 0.11 0.13 0.16 0.20 0.30 0.36 0.65 0.77 1.5 1.9 2.8 3.7 6.1 8.4 12.3 22 28 Rated current mA Temperature rise Saturation current current Idc1 Idc2 1000 1200 950 1190 890 1100 730 1020 680 920 550 740 480 680 350 500 320 460 270 320 240 290 200 200 160 170 140 130 110 115 100 90 80 70 65 60 Measuring frequency MHz 20% 7.96 2.52 10% 20% 0.796 CBC3225 TYPE Ordering code CB C3225T1R0MR CB C3225T1R5MR CB C3225T2R2MR CB C3225T3R3MR CB C3225T4R7MR CB C3225T6R8MR CB C3225T100R CB C3225T150R CB C3225T220R CB C3225T330R CB C3225T470R CB C3225T680R CB C3225T101R EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz min. 250 220 190 160 70 50 23 20 17 13 10 8 6 Resistance DC 30 0.055 0.06 0.08 0.095 0.10 0.12 0.133 0.195 0.27 0.41 0.67 1.0 1.4 Rated current mA Temperature rise current Idc2 2000 1440 2000 1310 2000 1130 2000 1040 1250 1010 950 940 900 900 730 850 620 780 500 570 390 480 320 410 270 340 Measuring frequency MHz Saturation current Idc1 20% 0.1 10% 20% CBL2012 TYPE Ordering code CB L2012T1R0M CB L2012T2R2M CB L2012T4R7M CB L2012T100M CB L2012T220M CB L2012T470M EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 4.7 10 22 47 Inductance Tolerance Self-resonant frequency MHz min. 100 80 45 32 23 11 Resistance DC 30 0.15 0.39 0.66 1.0 2.1 4.2 Rated current mA Temperature rise current Idc2 620 950 440 590 275 490 205 370 150 250 100 140 Measuring frequency MHz Saturation current Idc1 20% 0.1 Please specify the Inductance tolerance code or saturation current value Idc1 the DC current value having inductance decrease down to 30%. The is at 20 at 20 temperature rise current value Idc2 the DC current value having temperature increase up to 40. The is maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 50 wound02_e-01 PART NUMBERS CBMF1608 TYPE Ordering code CBMF1608T1R0M CBMF1608T2R2M CBMF1608T3R3M CBMF1608T4R7M CBMF1608T100 CBMF1608T220 CBMF1608T470 EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 1.0 2.2 3.3 4.7 10.0 22 47 Inductance Tolerance Self-resonant frequency MHz min. 100 80 60 45 32 16 11 Resistance DC 30 0.09 0.17 0.22 0.24 0.36 1.0 2.5 Rated current mA Temperature rise current Idc2 290 770 190 560 170 500 145 470 115 380 70 230 50 140 Measuring frequency MHz Saturation current Idc1 20% 7.96 10% 20% 2.52 Please specify the Inductance tolerance code or at 20 saturation current value Idc1 the DC current value having inductance decrease down to 30%. The is at 20 temperature rise current value Idc2 the DC current value having temperature increase up to 40. The is maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. The FERRITE PRODUCTS This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound02_e-01 51 ELECTRICAL CHARACTERISTICS DC Bias characteristicsMeasured by HP4285A42841A CB2012 1000 101 H 1000 101 H CB2016 1000 101 Low Rdc Type CB2518 100 H 100 100 100 Inductance Inductance 10 10 Inductance 100 10 100 1 1R0M 1 1R0M 1 1R0M 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 High Current Type CBC2012 100 470 1000 101 H CBC2016 1000 CBC2518 100 CBC3225 101 R 100 10 H H 100 100 100 101 10 H 100 R Inductance Inductance Inductance 10 10 1R0M 1 Inductance 100 1 1R0M 1 1R0M 1 1R0MR 0.1 1 10 DC Bias 100 mA 1000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 0.1 1 10 100 1000 DC Bias mA 10000 Low Profile Type CBL2012 100 470M H H Bottom-surface electrode Type CBMF1608 100 100 4R7M Inductance 10 100M 4R7M Inductance 10 1R0M 1 1 10 DC Bias 100 mA 1000 1 1 10 DC Bias 100 mA 1000 Impedance-vs-Frequency characteristicsMeasured by HP4291A CB2012 100000 10000 101 100 1R0M 1000 Impedance Impedance 100 10 1 1000 100 10 1 Impedance 100000 10000 101 100 1R0M CB2016 Low Rdc Type CB2518 100000 101 10000 1000 100 10 1 100 1R0M 1 10 100 1000 Frequency MHz 10000 1 100 1000 10 Frequency MHz 10000 1 100 1000 10 Frequency MHz 10000 High Current Type CBC2012 100000 470 10000 1000 Impedance Impedance 100 10 1 100 1R0M 1000 Impedance 100 10 1 10000 100000 101 100 1R0M 1000 100 10 1 Impedance 10000 CBC2016 100000 101 100 1R0M 1000 100 10 1 10000 CBC2518 100000 101 R 100 R 1R0MR CBC3225 1 100 1000 10 Frequency MHz 10000 1 100 1000 10 Frequency MHz 10000 1 100 1000 10 Frequency MHz 10000 1 100 1000 10 Frequency MHz 10000 Low Profile Type CBL2012 100000 470M 10000 1000 Impedance Impedance 100 10 1 100M 4R7M Bottom-surface electrode Type CBMF1608 100000 10000 1000 100 10 1 470 100 4R7M 1 10 Frequency 100 MHz 1000 1 10 100 1000 Frequency MHz 10000 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 52 wound02_e-01 WOUND CHIP INDUCTORS FOR SIGNAL LINE (LB/LE SERIES M TYPE) LB REFLOW LE WAVE REFLOW FEATURES BM2016 Series L High Q and narrow tolerance are achieved by adopting bottom-surface electrode structure.Wound Chip Inductors that are suitable for module design of signal line uses. EM2520 Series L A high-quality inductor that is simple to mass-produce and conforms to the same production process and basic construction as an axial lead type inductor. APPLICATIONS SC/DVC/HDD, LCD, portable telephones, game equipment. D Various audio-visual equipment, various communication equipment, etc. ORDERING CODE L BM 2 0 1 6 T T Packaging Tape & Reel 1 0 0 J Internal code Standard Products Blank space LBM Type Wound chip inductor for signal line Wound chip inductor for LEM signal line External Dimensions mm 2016 2.0x1.6 2520 2.5x2.0 Nominal Inductance H example R12 0.12 1R0 1.00 100 10.0 R=decimal point Inductance Tolerances J 5% K 10% EXTERNAL DIMENSIONS/STANDARD QUANTITY LBM2016 LEM2520 AVAILABLE CAPACITANCE RANGE Type Range 0.12 Ordinary type Inductance H LBM2016 Idc mA 610 LEM2520 Rdc30 0.37 Rdc30 Idc mA 0.13 520 1.0 385 0.38 245 1.10 e e 10 215 1.20 155 3.50 Type LBM2016 L W T e W Standard Quantity [pcs] Paper Tape Embossed Tape 2000 100 80 8.00 100H 60 21.00 100H 2.00.2 1.60.2 1.60.2 0.50.2 0.080.008 0.0630.0080.0630.008 0.020.008 2.50.2 2.00.2 1.80.2 0.45 1.40.1 LEM2520 0.0980.008 0.0790.008 0.0710.008 0.018 0.0550.004 Unitmm inch Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. LB only Applicable soldering process to those products is reflow soldering only. Recommended Land Patterns C Unitmm A B A TYPE LBM2016 LEM2520 A 0.7 0.9 B 0.8 1.5 C 1.8 1.5 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 54 wound03_e-01 PART NUMBERS LBM2016 TYPE Ordering code LB M2016TR12J LB M2016TR15J LB M2016TR18J LB M2016TR22J LB M2016TR27J LB M2016TR33J LB M2016TR39J LB M2016TR47J LB M2016TR56J LB M2016TR68J LB M2016TR82J LB M2016T1R0J LB M2016T1R2J LB M2016T1R5J LB M2016T1R8J LB M2016T2R2J LB M2016T2R7J LB M2016T3R3J LB M2016T3R9J LB M2016T4R7J LB M2016T5R6J LB M2016T6R8J LB M2016T8R2J LB M2016T100J LB M2016T120J LB M2016T150J LB M2016T180J LB M2016T220J LB M2016T270J LB M2016T330J LB M2016T390J LB M2016T470J LB M2016T560J LB M2016T680J LB M2016T820J LB M2016T101J EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Inductance Tolerance Q min. Self-resonant frequency MHz min. 600 550 500 450 425 400 375 350 300 270 250 220 180 135 100 75 55 48 43 40 36 33 30 27 23 20 18 17 16 15 14 13 12 11 10 9.0 Resistance DC 30 0.13 0.15 0.15 0.20 0.21 0.21 0.26 0.26 0.29 0.32 0.34 0.38 0.41 0.47 0.48 0.54 0.59 0.68 0.74 0.78 0.88 0.97 1.10 1.20 1.4 1.5 2.5 2.8 3.2 3.6 3.9 4.1 5.9 7.0 7.7 8.0 Rated current mA max. 610 570 560 520 510 490 440 430 410 400 390 385 370 350 345 340 310 290 275 270 255 240 225 215 200 190 150 140 130 125 120 115 95 90 85 80 Measuring frequency MHz 25.2 30 FERRITE PRODUCTS 7.96 5 25 2.52 20 15 0.796 LEM2520 TYPE Ordering code LEM 2520 TR12K LEM 2520 TR15K LEM 2520 TR18K LEM 2520 TR22K LEM 2520 TR27K LEM 2520 TR33K LEM 2520 TR39K LEM 2520 TR47K LEM 2520 TR56K LEM 2520 TR68K LEM 2520 TR82K LEM 2520 T1R0J LEM 2520 T1R2J LEM 2520 T1R5J LEM 2520 T1R8J LEM 2520 T2R2J LEM 2520 T2R7J LEM 2520 T3R3J LEM 2520 T3R9J LEM 2520 T4R7J LEM 2520 T5R6J LEM 2520 T6R8J LEM 2520 T8R2J LEM 2520 T100J LEM 2520 T120J LEM 2520 T150J LEM 2520 T180J LEM 2520 T220J LEM 2520 T270J LEM 2520 T330J LEM 2520 T390J LEM 2520 T470J LEM 2520 T560J LEM 2520 T680J LEM 2520 T820J LEM 2520 T101J EHS Environmental Hazardous Substances RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance H 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Inductance Tolerance Q min. Self-resonant frequency MHz min. 600 550 500 450 425 400 375 350 300 270 250 220 180 135 100 75 55 48 43 40 36 33 30 27 23 20 18 17 16 15 14 13 12 11 10 9 Resistance DC 30 0.37 0.42 0.46 0.52 0.56 0.60 0.65 0.68 0.75 0.85 1.00 1.10 1.20 1.30 1.45 1.55 1.70 1.90 2.10 2.30 2.50 2.70 3.05 3.50 3.80 4.40 4.80 5.50 6.30 7.10 9.50 11.10 12.10 16.60 19.00 21.00 Rated current mA max. 520 480 460 430 420 400 375 350 325 300 260 245 230 220 210 200 195 185 180 175 170 165 160 155 150 140 130 125 115 110 90 80 75 70 65 60 Measuring frequency MHz 10 25.2 30 7.96 5 25 2.52 20 15 0.796 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound03_e-01 55 ELECTRICAL CHARACTERISTICS LBM2016 Q-vs-Frequency characteristics 100 100J 101J Q 10 1R0J Impedance-vs-Frequency characteristics 1000000 101J 100000 10000 100J 1R0J Inductance-vs-Frequency characteristics 1000 Inductance[ H] 100 101J 10 100J 1000 100 0 1 10 1 1 1R0J 10 Frequency[MHz] 100 10 Freaquency[MHz] 100 0 1 10 Freaquency[MHz] 100 LEM2520 Q-vs-Frequency characteristics Measured by HP4285A42851A DC Bias characteristics Measured by HP4285A42841A Temperature characteristics Measured by HP4285A42851A This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 56 wound03_e-01 PACKAGING Minimum Quantity Type LBC3225/CBC3225 LB3218 LBR2518/LBC2518/LB251 /CB2518/CBC2518/LEM2520 LBM2016/LBC2016/ LB2016/CB2016/CBC2016 LB2012/LBC2012/LBR202 /CB2012/CBC2012 CBL2012 LB1608 LBMF1608/CBMF1608 Standard Quantity pcs Papar Tape Embossed Tape 1000 2000 4000 4000 2000 2000 3000 3000 Leader and Blank Portion Reel Size 0.039 0 2.36 1 0 10.0 1.5 (0.394 0.059) Top Tape Strength The top tape requires a peel-off force 0.1 to 0.7N in the direction of the arrow as illustrated below. Pull direction Taping Dimensions Embossed Tape 0.315 inches wide Card board carrier tape 0.315 inches wide Type LBM 2016 LEM 2520 LBC3225/ CBC3225 LB3218 Chip cavity A B Insertion pitch F Tape thickness T K 2.10.1 4.00.1 0.30.05 1.9max. 1.750.1 0.0690.004 0.0830.004 0.1570.004 0.0120.002 0.074 2.30.1 2.70.1 4.00.1 0.30.05 2.10.1 0.0910.004 0.1060.004 0.1570.004 0.0120.002 0.0830.004 2.80.1 3.50.1 4.00.1 0.30.05 4.0max. 0.1100.004 0.1380.004 0.1570.004 0.0120.002 0.157 2.10.1 3.50.1 4.00.1 0.30.05 2.2max. 0.0840.004 0.0140.004 0.1570.004 0.0120.002 0.086 LB2518 / CB2518 2.150.1 2.70.1 4.00.1 0.30.05 2.2max. LBC2518 / CBC2518 0.0850.004 0.1070.004 0.1570.004 0.0120.002 0.086 LBR2518 LB2016/ CB2016 1.750.1 2.10.1 4.00.1 0.30.05 1.9max. LBC2016 / CBC2016 0.0690.004 0.0830.004 0.1570.004 0.0120.002 0.074 LB2012 / CB2012 1.450.1 2.250.1 4.00.1 0.250.05 1.45max. LBC2012 / CBC2012 0.0580.004 0.090.004 0.1570.004 0.0100.002 0.057 LBR2012 1.550.1 2.30.1 4.00.1 1.1max. 1.1max. CBL2012 0.044 0.0610.004 0.0910.004 0.1570.004 0.044 1.00.1 1.80.1 4.00.1 1.1max. 1.1max. LB1608 0.044 0.0590.004 0.0720.004 0.1570.004 0.044 LBMF1608 / 1.10.1 1.90.1 4.00.1 0.250.05 1.2max. CBMF1608 0.040.004 0.0760.004 0.1570.004 0.0100.002 0.047 Unitmm inch This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 180 60 0 3 7.09 Embossed tape 0 0.118 Tape material 2.5 max 0.098 ) ) wound0103_reli-PRP1 RELIABILITY DATA 1.Operating temperature Range LEM2520 LB3218 LB2518 LB2016 LBC3225 LBC2518 LBC2016 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 2.Storage LEM2520 LB3218 LBC3225 LBR2518 CB2518 CBC3225 CBL2012 CBMF1608 LBM2016 4085 LB2012 LBC2012 LB1608 LBMF1608 CBC2012 Including self-generated heat 25105 LB2518 LBC2518 LBR2012 CB2016 CBC2518 LB2016 LBC2016 CB2012 CBC2016 LB2012 LBC2012 LB1608 LBMF1608 4085 CBC2012 3.Rated Current LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 Within the specified tolerance CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEM Series The maximum DC value having inductance decrease within 10 and temperature increase within 20 by the application of DC bias. 4.Inductance LEM2520 LB3218 LB2518 LB2016 LBC2016 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEM Series R12101 LB2012 LBC2012 LB1608 LBMF1608 Within the specified tolerance CBC2012 LBLBCLBRCBCBCCBLLBMFCBMFLBM Series Measuring equipmentLCR Meter HP4285A42851A or its equivalent Measuring frequencySpecified frequency Measuring equipmentLCR Mater HP4285A or its equivalent 5.Q LEM2520 Within the specified tolerance LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Within the specified tolerance Test Methods and Remarks LEM Series R12101 Measuring equipmentLCR Meter HP4285A42851A or its equivalent Measuring frequencySpecified frequency LBM Series Measuring equipmentLCR Mater HP4285A or its equivalent 6.DC Resisitance LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 Within the specified tolerance CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEMLBLBCLBRCBCBCCBLLBMLBMFCBMF SeriesMeasuring equipmentDC Ohmmeter HIOKI 3227 or its equivalent This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP2 wound0103_reli_e-01 RELIABILITY DATA 7.Self-Resonant Frequency LEM2520 LB3218 LB2518 LB2016 LB2012 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEM2520 LBLBCLBRCBCBCCBLLBMFCBMF Series LBM Series 8.Temperature Characteristic LEM2520 LB3218 LBC3225 LBR2518 CB2518 CBC3225 LB2518 LBC2518 LBR2012 CB2016 CBC2518 LB2016 LBC2016 CB2012 CBC2016 CBC2012 LB2012 LBC2012 LB1608 LBMF1608 LB1608 LBMF1608 Within the specified tolerance Measuring equipmentImpedance analyzer HP4291A or its equivalent Measuring equipmentImpedance analyzer HP4291A or its equivalent Measuring equipmentNetwork analyzer HP8720B or its equivalent CBL2012 CBMF1608 LBM2016 Test Methods and Remarks Change of maximum inductance deviation in step 1-5 Inductance change:Within5 Inductance change:Within15 LBMF1608LB3218Inductance change:Within20 LBC3225LBC2518LBC2016 Inductance change:Within20 LBC2012 Inductance change:Within30 Inductance change:Within15 Inductance change:Within15 CBC3225CBC2518CBC2016 Inductance change:Within20 CBC2012 Inductance change:Within30 Inductance change:Within15 Inductance change:Within20 Inductance change:Within5 2 25 3 4 5 20 Step Temperture 1 20 20 Reference temperature 85 Maximum operating temperature 9.Rasistance to Flexure of Substrate LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 No damage. CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks Pressing jig Warp 2mm LBLBCLBRCBCBCCBLLBMLBMFCBMF Series 3mm LEM2520 LB LBMF CBMF1608 Test substrate: Printed board 0.8mm Others 1.0mm According to JIS C0051 Board 10.Body Strength LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LBLBCLBRCBCBCCBLLBMLEM2520 Applied force10N Duration10sec. LB1608LBMF1608CBMF1608 Applied force5N Duration10sec. No damage. 11.Self Resonant Freguency LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change : Within10 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 Inductance change : Within20 CB2518 CB2016 CB2012 CBC2012 CBC2518 CBC2016 CBC3225 Inductance change : Within30 CBL2012 CBMF1608 LBM2016 Inductance change : Within10 Test Methods and Remarks Measure inductance with application of rated current using LCR metre to compare it with the initial value. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 wound0103_reli-PRP3 RELIABILITY DATA 12.Adhesion of terminal electrode LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 No abnormality. CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LBLBCLBRCBCBCCBLLBMLBMFCBMFLEM2520Applied force10N to X and Y directions Duration5 sec. Test substratePrinted board LB1608CBMF1608LBMF1608 Applied force5N to X and Y directions Duration5 sec. Test substratePrinted board 13.Resistance to vibration LEM2520 Inductance change:Within5 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 LBR2518 LBR2012 Inductance change:Within10 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Inductance change:Within5 Test Methods and Remarks LEMLBLBCLBRCBCBCCBLLBMLBMFCBMFAccording to JIS C5102 clause 8.2. Vibration typeA Directions2 hrs each in X, Y and Z directions. Total6 hrs Frequency range10 to 55 to 10 Hz 1min. Amplitude1.5mm Mounting methodSoldering onto printed board RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 14.Drop test LEM2520 Inductance change:Within5 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEM Acceleration980m/sec2 Duration6msec Number of times6 sides x 3 times Mounting methodSoldering onto printed board RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 15.Solderability LEM2520 LB3218 LB2518 LB2016 LBC3225 LBC2518 LBC2016 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEM No significant abnormality in appearance. No significant abnormality in appearance. No significant abnormality in appearance. No significant abnormality in appearance. LB2012 LBC2012 LB1608 LBMF1608 At least 90 of surface of terminal electrode is covered by new CBC2012 Solder temperature2305 Duration50.5sec. FluxMethanol solution with 25 of colophony LBLBCLBRCBCBCCBLLBMLBMFCBMF Solder temperature2455 Duration50.5sec FluxMethanol solution with 25 of colophony This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP4 wound0103_reli_e-01 RELIABILITY DATA 16.Resisitance to soldering heat LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 No significant abnormality in appearance. LB3218 LB2518 LB2016 LB2012 LB1608 Inductance change:Within10 No significant abnormality in appearance. LBMF1608 Inductance change:Within20 No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 Inductance change:Within10 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 Inductance change:Within20 LBM2016 Inductance change:Within5 Test Methods and Remarks LEM Reflow condition 3 times of reflow over at 2205 for 40sec. MAX, With Peak temperature at 2405 for 5 sec. MAX. Refer to a Profile of chart below. Flow condition Solder temperature2605 Duration101sec. Once LBLBCLBRCBCBCCBLLBMLBMFCBMF 3 times of reflow oven at 230 MIN for 40sec. with peak temperature at 260 for 5sec. 17.Resisitance to solvent LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks Solvent temperatureRoom temperature Type of solventIsopropyl alcohol LEM2520LBLBCLBRCBCBCCBLLBMLBMFCBMF Cleaning conditions90s. Immersion and cleaning. LEM2520LBLBCLBRCBCBCCBLLBMLBMFCBMF 18.Thermal shock Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. No significant abnormality in appearance. No significant abnormality in appearance. No significant abnormality in appearance. No significant abnormality in appearance LEM2520 LB3218 LB2012 LB2518 LB2016 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks Step Temperature Duration min LEM : Conditions for 1cycle 1 40 30 2 85 30 Inductance change:Within10 No significant abnormality in appearance. Number of cycle100 cycle RecoveryAt least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. LBLBCLBRCBCBCCBLLBMLBMFCBMF 4085, maintain times 30min. ,100 cycle RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 19.Damp heat Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. LEM2520 LB3218 LB2012 LB2518 LB2016 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 LBR2518 LBR2012 CB2518 CB2016 CB2012 Inductance change:Within10 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks Temperature602 Humidity9095RH Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. No significant abnormality in appearance. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 wound0103_reli-PRP5 RELIABILITY DATA 20.Loading under damp heat Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. LEM2520 LB3218 LB2012 LB2518 LB2016 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 LBR2518 LBR2012 CB2518 CB2016 CB2012 Inductance change:Within10 No significant abnormality in appearance. CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEMLBLBCLBRCBCBCCBLLBMLBMFCBMFTemperature602 Humidity9095RH Duration1000 hrs Applied currentRated current RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 21.High temperature life test Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. LEM2520 LB3218 LB2012 LB2518 LB2016 LB1608 LBMF1608 LBC2016 LBC2012 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC2518 CBC2016 CBC2012 CBC3225 CBL2012 No significant abnormality in appearance. Inductance change:Within10 CBMF1608 LBM2016 Test Methods and Remarks LEMCBCBCCBLLBMCBMFTemperature852 Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 22.Loading at high temperature LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 Inductance change:Within10 No significant abnormality in appearance. LBR2518 LBR2012 CB2016 CB2012 CB2518 CBC2518 CBC2016 CBC2012 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LBLBCLBRLBMFTemperature852 Duration1000 hrs Applied currentRated current RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli-PRP6 wound0103_reli_e-01 RELIABILITY DATA 23.Low temperature life test Inductance change :Within10 Q R124R730 min. 5R633025 min. 39082020 min. 10115 min. LEM2520 LB3218 LB2012 LB2518 LB2016 LB1608 LBMF1608 LBC2518 LBC2016 LBC2012 LBC3225 LBR2518 LBR2012 CB2518 CB2016 CB2012 Inductance change:Within10 CBC2016 CBC2012 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 Test Methods and Remarks LEMLBLBCLBRCBCBCCBLLBMLBMFCBMF Temperature402 Duration1000 hrs RecoveryAt least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEMRecovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 24.Standard condition LEM2520 LB3218 LB2518 LBC3225 LBC2518 LBR2518 LBR2012 CB2518 CB2016 CBC2518 CBC3225 CBL2012 CBMF1608 LBM2016 No significant abnormality in appearance. LB2016 LBC2016 CB2012 CBC2016 LB2012 LBC2012 LB1608 LBMF1608 CBC2012 Standard test conditions Unless specified, Ambient temperature is 2015 and the Relative humidity is 65 20. If there is any doubt about the test results, further measurement shall be had within the following limits: Ambient Temperature: 202 Relative humidity: 655 Inductance value is based on our standard measurement systems. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0103_reli_e-01 wound0103_reli-PRP7 PRECAUTIONS LEM TypeLB TypeCB Type 1 Circuit Design Operating environment 1The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high Precautions reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2 PCB Design Land pattern design Precautions 1 Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications. PRECAUTIONS Unit : mm Recommended Land Patterns TYPE A B C Surface Mounting Mounting and soldering conditions should be checked beforehand. 1608 0.55 0.7 1.0 Applicable soldering process to those products is reflow soldering only. MF1608 0.55 0.8 0.9 Recommended Land Patterns Technical 2012 0.7 0.8 1.45 consider2016 0.7 0.8 1.8 ations 2518 0.8 1.2 2.0 C LEM2520 0.9 1.5 1.5 3218 1.0 1.6 2.0 3225 1.0 1.6 2.7 A B A 3 Considerations for automatic placement Adjustment of mounting machine Precautions 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Technical consider- 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. ations 4 Soldering Wave soldering LEM Type only 1 For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications. Reflow soldering LB and CB Types 1 For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended. LEM Precautions Reflow soldering 1 For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications. Recommended conditions for using a soldering iron 1 Put the soldering iron on the land-pattern. Soldering iron's temperature-Below 350 Duration-3 secons or less. The soldering iron shoud not come in contact with inductor directly. Wave soldering LEM Type only 1 Components can be damaged by excessive heat where soldering conditions exceed the specified range. Reflow soldering LB and CB Types 1 Reflow profile 300 250 LB CB Type Peak Temp: 260 0/ 5 5 sec Max Pre-heat zone 230 Minn Technical considerations 200 180 150 150 100 50 0 90 30 sec 30 10 sec Recommended conditions for using a soldering iron 1 Components can be damaged by excessive heat where soldering conditions exceed the specified range. 5 Cleaning Precautions Technical considerations 6 Handling Handling 1 Keep the inductors away from all magnets and magnetic objects. Breakaway PC boards splitting along perforations 1 When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board. Precautions 2 Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1 Please do not give the inductors any excessive mechanical shocks. Handling 1 There is a case that a characteristic varies with magnetic influence. Technical Breakaway PC boards splitting along perforations consider1 Planning pattern configurations and the position of products should be carefully performed to minimize stress. ations Mechanical considerations 1 There is a case to be damaged by a mechanical shock. 7 Storage conditions Storage 1 maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. To Recommended conditions Ambient temperature040HumidityBelow 70% RH Precautions The ambient temperature must be kept below 30 Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, LE type inductors should be used within one year from the time of delivery. LB typeShould be used within 6 months from the time of delivery. LE typeIn case of storage over 6 months, solderability shall be checked before actual usage. Technical Storage 1 Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of considerations taping/packaging materials may take place. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Cleaning conditions 1 LEM Type, LB Type, CB Type Washing by supersonic waves shall be avoided. Cleaning conditions 1 LEM Type, LB Type, CB Type If washing by supersonic waves, supersonic waves may cause broken products. wound0103_reli-PRP8 wound0103_reli_e-01 SMD INDUCTORS LOW PROFILE TYPE REFLOW FEATURES Small and Low profile inductor. It corresponds to High current. Simple and original magnetic shield structure. Durable structure against dropping impact. APPLICATIONS For small DC/DC converter (cellular Phone, HDD, DVC, DSC, PDA, LCD display etc). ORDERING CODE N R4 Type Coating resin specification Blank Space 0 1 8 T T1 Packaging Tape & Reel Blank Space 0 0 M Internal code Standard product Blank Space NR, NRG Nominal inductance H example Inductance tolerance M 20% N 30% example 3010 3012 3015 4010 4012 4018 External dimensions (WxLxH) 4026 4.0x4.0x2.6mm 3.0x3.0x1.0mm 5040 5.0x5.0x4.0mm 3.0x3.0x1.2mm 6012 6.0x6.0x1.2mm 3.0x3.0x1.5mm 6020 6.0x6.0x2.0mm 4.0x4.0x1.0mm 6028 6.0x6.0x2.8mm 4.0x4.0x1.2mm 6045 6.0x6.0x4.5mm 4.0x4.0x1.8mm 8040 8.0x8.0x4.0mm 2R2 100 101 2.2 10 100 Rdecimal point EXTERNAL DIMENSIONS/STANDARD QUANTITY L H e W f e L H e W e Type NR3010 NR3012 NR3015 NR4010 NR4012 NR4018 NRG4026 L W H 1.0 max 0.039 max e f Standard Quantity [pcs] Tape & Reel 2000 2000 2000 5000 4500 3500 2000 e f Type L W H e e f Standard Quantity [pcs] Tape & Reel 1500 NR5040 1.2 max 0.90.2 3.00.1 3.00.1 1.90.2 0.1180.004 0.1180.004 0.047 max 0.0350.0080.0750.008 1.5 max 0.059 max 1.0 max 0.039 max 4.00.2 0.157 0.008 4.00.2 0.157 0.008 1.2 max 0.047 max 1.10.2 2.50.2 1.8 max 0.0430.0080.0980.008 0.071 max 3 4.1max 0.161max 1.20.2 4.90.2 4.90.2 0.30.2 3.30.2 1.30.3 0.1930.008 0.1930.008 44.0max 0.0470.008 0.0110.008 0.1300.008 0.0510.011 0.157max 6.00.2 6.00.2 1.2 max 1.350.2 0.30.2 4.00.2 NR6012 E Type 0.2360.008 0.2360.008 0.047 max 0.0530.008 0.0110.008 0.1570.008 NR6020 NR6028 NR6045 1.350.2 0.30.2 4.00.2 6.00.2 6.00.2 2.0 max 0.2360.008 0.2360.008 0.078 max 0.0530.008 0.0110.008 0.1570.008 1.350.2 0.30.2 4.00.2 6.00.2 6.00.2 2.8 max 0.2360.008 0.2360.008 0.110 max 0.0530.008 0.0110.008 0.1570.008 1.350.2 0.30.2 4.00.2 6.00.2 6.00.2 4.5 max 0.2360.008 0.2360.008 0.177 max 0.0530.008 0.0110.008 0.1570.008 1000 2500 2000 1500 Unit : mm (inch) 2.30.3 0.0910.011 2.6 max 0.102 max *14.2max 8.00.2 8.00.2 0.165max 1.60.3 5.60.3 NR8040 0.3150.008 0.3150.008 *24.0max 0.0630.012 0.2200.012 0.157max *10R96R8 Type *2100101 Type *31R5100 Type *4150470 Type 1000 Unit : mm (inch) This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 122 wound04_e-01 Recommended Land Patterns NR3010, NR3012, NR3015 2.2 2.7 3.7 0.8 0.8 4.0 5.7 NR4010, NR4012, NR4018, NRG4026 2.8 NR5040 3.6 NR6012,NR6020,NR6028,NR6045 4.7 NR8040 5.6 7.5 1.2 1.2 1.5 1.5 1.6 1.6 1.8 1.8 Unit : mm AVAILABLE INDUCTANCE RANGE Range Type NR 3010 IMAX [mA] NR 3012 NR 3015 NR 4010 NR 4012 NR 4018 NR 5040 NR 6012 NR 6020 NR 6028 NR 6045 NR 8040 NRG 4026 Rdc30 Rdc20 IMAX [mA] 0.065 1490 Rdc20 IMAX [mA] 0.05 2100 Rdc20 IMAX [mA] 0.030 1050 Rdc20 IMAX [mA] 0.100 1500 Rdc20 IMAX [mA] 0.060 1830 Rdc20 IMAX [mA] 0.030 Rdc30 IMAX [mA] Inductance H 0.8 1300 1.0 3.3 10 47 100 220 500 220 Rdc20 IMAX [mA] 3800 Rdc20 IMAX [mA] 0.020 4600 Rdc30 IMAX [mA] 0.013 4200 Rdc30 IMAX [mA] 0.014 7800 Rdc30 IMAX [mA] 0.006 2300 FERRITE PRODUCTS 3600 0.450 540 2.05 250 0.290 700 1.45 300 0.230 560 1.34 240 0.380 740 1.81 350 0.240 840 1.00 0.180 2100 900 0.020 1730 0.095 0.235 1400 950 0.125 1900 0.290 620 0.600 700 0.500 1000 0.290 0.065 2500 0.047 3100 0.030 0.056 1000 0.310 320 0.034 1300 0.085 650 0.300 170 4.00 2.18 PART NUMBERS NR 3010 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR NR 3010T 3010T 3010T 3010T 3010T 3010T 3010T 3010T 3010T 3010T 3010T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M 330M 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 126 98 82 63 56 46 35 30 25 20 17 DC Resistance [] (20) 0.065 0.080 0.095 0.140 0.190 0.300 0.450 0.740 1.03 1.55 2.05 mA Rated current Saturation current Temperature rise current Idc2 Idc1 1,300 1,400 1,300 1,200 1,100 1,100 870 940 750 780 610 630 500 510 400 400 350 350 260 275 220 235 Measuring frequency kHz 100 20 NR 3012 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR NR 3012T 3012T 3012T 3012T 3012T 3012T 3012T 3012T 3012T 3012T 3012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M 330M 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 110 92 70 55 48 40 32 27 22 19 17 DC Resistance [] (20) 0.050 0.060 0.080 0.100 0.130 0.190 0.290 0.450 0.630 1.03 1.45 mA Rated current Saturation current Temperature rise current Idc1 Idc2 1,500 1,490 1,400 1,360 1,100 1,200 910 1,050 770 980 670 740 540 630 440 485 375 420 310 330 250 280 Measuring frequency kHz 100 20 NR 3015 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR NR 3015T 3015T 3015T 3015T 3015T 3015T 3015T 3015T 3015T 3015T 3015T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M 330M 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 100 87 64 49 40 36 28 23 20 18 17 DC Resistance [] (20) 0.030 0.040 0.060 0.080 0.120 0.160 0.230 0.360 0.520 0.840 1.34 mA Rated current Saturation current Temperature rise current Idc1 Idc2 2,100 2,100 1,820 1,800 1,480 1,500 1,210 1,230 1,020 1,040 870 880 700 710 560 560 470 470 390 370 320 300 Measuring frequency kHz 100 20 saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound04_e-01 123 PART NUMBERS NR 4010 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR 4010T 4010T 4010T 4010T 4010T 4010T 4010T 4010T 4010T 4010T 1R0N 2R2N 3R3M 4R7M 6R8M 100M 150M 220M 330M 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 116 73 58 47 38 31 24 19 15 13 DC Resistance [] (20) 0.100 0.150 0.180 0.210 0.300 0.380 0.510 0.870 1.54 1.81 mA Rated current Saturation current Temperature rise current Idc1 Idc2 1,800 1,050 890 1,150 1,100 820 900 750 740 620 560 600 470 510 360 400 280 300 240 280 Measuring frequency kHz 100 20 NR 4012 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR 4012T 4012T 4012T 4012T 4012T 4012T 4012T 4012T 4012T 4012T 1R0N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M 330M 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 131 66 50 45 35 28 23 18 15 12 DC Resistance [] (20) 0.060 0.090 0.130 0.140 0.180 0.240 0.400 0.480 0.810 1.00 mA Rated current Saturation current Temperature rise current Idc1 Idc2 2,500 1,500 1,650 1,200 1,200 980 1,050 960 900 840 740 770 560 600 510 540 400 420 350 370 Measuring frequency kHz 20 100 NR 4018 Shielded type Ordering code NR 4018T 1R0N NR 4018T 2R2M NR 4018T 3R3M NR 4018T 4R7M NR 4018T 6R8M NR 4018T 100M NR 4018T 150M NR 4018T 220M NR 4018T 330M NR 4018T 470M NR 4018T 680M NR 4018T 101M NR 4018T 151M NR 4018T 221M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 80 52 44 34 29 24 19 16 12 10 8.3 6.5 5.5 4.0 DC Resistance [] (20) 0.030 0.060 0.070 0.090 0.110 0.180 0.250 0.360 0.530 0.650 1.00 1.50 2.50 4.00 mA Rated current Saturation current Temperature rise current Idc1 Idc2 4,000 1,830 2,700 1,440 2,000 1,230 1,700 1,200 1,450 1,060 1,200 840 940 650 800 590 650 490 570 420 470 320 400 270 310 220 270 170 Measuring frequency kHz 20 100 NR 5040 Shielded type Ordering code NR 5040T 1R5N NR 5040T 2R2N NR 5040T 3R3N NR 5040T 4R7N NR 5040T 6R8M NR 5040T 100M NR 5040T 150M NR 5040T 220M NR 5040T 330M NR 5040T 470M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Inductance Tolerance Self-resonant frequency MHz (min.) 60 42 32 28 21 18 13 9 7 6 DC Resistance [] (30) 0.020 0.022 0.027 0.029 0.049 0.056 0.080 0.126 0.180 0.310 mA Rated current Saturation current Temperature rise current Idc1 Idc2 6,000 3,600 4,600 3,500 3,800 3,300 3,300 3,100 2,600 2,300 2,300 2,100 2,000 1,800 1,600 1,400 1,300 1,200 1,100 900 Measuring frequency kHz 30 100 20 NR 6012 Shielded type Ordering code NR 6012T 2R5NE NR 6012T 4R0NE NR 6012T 5R3ME NR 6012T 6R8ME NR 6012T 100ME NR 6012T 150ME NR 6012T 220ME NR 6012T 330ME NR 6012T 470ME NR 6012T 680ME NR 6012T 101ME EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 2.5 4.0 5.3 6.8 10 15 22 33 47 68 100 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 45 39 34 30 22 18 12 8 6 3 1 DC Resistance [] (20) 0.090 0.105 0.125 0.165 0.235 0.330 0.530 0.700 1.05 1.35 2.18 mA Rated current Saturation current Temperature rise current Idc1 Idc2 2,100 1,730 1,800 1,570 1,500 1,400 1,300 1,180 1,000 1,000 800 790 760 630 590 530 520 460 440 410 350 320 Measuring frequency kHz 100 20 saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 124 wound04_e-01 PART NUMBERS NR 6020 Shielded type Ordering code NR 6020T 0R8N NR 6020T 1R5N NR 6020T 2R2N NR 6020T 3R3N NR 6020T 4R7N NR 6020T 6R8N NR 6020T 100M NR 6020T 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.8 1.5 2.2 3.3 4.7 6.8 10 22 Inductance Tolerance Self-resonant frequency MHz (min.) 110 93 73 55 43 30 18 11 DC Resistance [] (20) 0.020 0.026 0.034 0.040 0.058 0.085 0.125 0.290 mA Rated current Saturation current Temperature rise current Idc1 Idc2 5,500 3,800 4,000 3,200 3,200 2,700 2,800 2,600 2,400 2,000 2,000 1,800 1,700 1,400 1,050 950 Measuring frequency kHz 30 100 20 NR 6028 Shielded type Ordering code NR 6028T 0R9N NR 6028T 1R5N NR 6028T 2R2N NR 6028T 3R0N NR 6028T 4R7M NR 6028T 6R0M NR 6028T 100M NR 6028T 150M NR 6028T 220M NR 6028T 330M NR 6028T 470M NR 6028T 680M NR 6028T 101M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.9 1.5 2.2 3.0 4.7 6.0 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz (min.) 90 78 68 55 39 30 20 17 12 10 8 5 3 DC Resistance [] (30) 0.013 0.016 0.020 0.023 0.031 0.040 0.065 0.095 0.135 0.220 0.300 0.420 0.600 mA Rated current Saturation current Temperature rise current Idc1 Idc2 6,600 4,600 5,000 4,200 4,200 3,700 3,600 3,400 2,700 3,000 2,500 2,500 1,900 1,900 1,600 1,800 1,300 1,400 1,100 1,100 950 920 760 770 620 660 Measuring frequency kHz FERRITE PRODUCTS 30 100 20 NR 6045 Shielded type Ordering code NR 6045T 1R0N NR 6045T 1R3N NR 6045T 1R8N NR 6045T 2R3N NR 6045T 3R0N NR 6045T 4R5M NR 6045T 6R3M NR 6045T 100M NR 6045T 150M NR 6045T 220M NR 6045T 330M NR 6045T 470M NR 6045T 680M NR 6045T 101M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.3 1.8 2.3 3.0 4.5 6.3 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz (min.) 110 95 DC Resistance [] (30) 0.014 0.016 0.018 0.021 0.024 0.031 0.038 0.047 0.077 0.115 0.145 0.220 0.330 0.500 mA Rated current Saturation current Temperature rise current Idc2 Idc1 8,500 8,000 7,000 6,000 5,000 4,000 3,800 3,000 2,300 1,900 1,500 1,300 1,000 800 4,200 4,000 3,700 3,500 3,200 3,000 2,800 2,500 1,900 1,500 1,400 1,100 900 700 Measuring frequency kHz 30 80 60 45 25 15 12 10 100 20 7 6 5 4 3 NR 8040 Shielded type Ordering code NR NR NR NR NR NR NR NR NR NR NR NR NR 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 0R9N 1R4N 2R0N 3R6N 4R7N 6R8N 100M 150M 220M 330M 470M 680M 101M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.9 1.4 2.0 3.6 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant frequency MHz (min.) 85 63 50 34 30 24 22 16 13 12 8 7 6 DC Resistance [] (30) 0.006 0.007 0.009 0.015 0.018 0.025 0.034 0.050 0.066 0.100 0.150 0.230 0.290 mA Rated current Saturation current Temperature rise current Idc1 Idc2 11,000 7,800 9,000 7,000 6,300 7,400 4,900 5,300 4,100 4,700 3,700 4,000 3,400 3,100 2,400 2,700 2,200 2,200 1,700 1,900 1,400 1,500 1,100 1,200 1,000 1,000 Measuring frequency kHz 30 100 20 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound04_e-01 125 PART NUMBERS NRG 4026 Shielded type Ordering code NRG4026 T 1R2N NRG4026 T 2R3N NRG4026 T 3R5M NRG4026 T 4R7M NRG4026 T 6R6M NRG4026 T 100M NRG4026 T 150M NRG4026 T 220M NRG4026 T 330M NRG4026 T 470M Inductance [H] 1.2 2.3 3.5 4.7 6.6 10 15 22 33 47 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 120 96 58 46 33 DC Resistance [] (30%) 0.030 0.040 0.050 0.055 0.065 0.085 0.110 0.165 0.200 0.300 mA Rated current Saturation current Temperature rise current Idc1 Idc2 3,100 2,100 1,800 1,450 1,300 1,000 900 610 540 410 2,300 1,970 1,700 1,600 1,500 1,300 1,100 900 800 650 Measuring frequency kHz 20 26 19 13 9 6 100 saturation current (Idc1) is DC current value Inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is Idc2. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 126 wound04_e-01 ELECTRICAL CHARACTERISTICS DC Bias characteristics NR 3010 100 100 NR 3012 100 Measured by HP4285A NR 3015 100 NR 4010 470M 470M 470M 470M 220M 220M 220M 220M H H H Inductance Inductance Inductance Inductance H 10 100M 10 100M 10 100M 10 100M 4R7M 4R7M 4R7M 4R7M 2R2M 2R2M 2R2M 2R2N FERRITE PRODUCTS 1 10 100 1,000 10,000 1 10 100 1,000 10,000 1 10 100 1,000 10,000 1 10 100 1,000 10,000 DC Bias mA DC Bias mA DC Bias mA DC Bias mA NR 4012 100 1000 NR 4018 100 NR 5040 NR 6012 E Type 1000 470M 221M 470M 100 H H 220M 101M 220M 100 H 101M H Inductance Inductance 10 100M Inductance 10 100M Inductance 470M 470M 220M 220M 10 4R7M 100M 4R7M N 10 100M 5R3M 4R7N 2R2N 2R2M 2R2M 1 10 100 1,000 10,000 1 10 100 1,000 10,000 1 10 100 1,000 10,000 1 10 100 1,000 10,000 DC Bias mA DC Bias mA DC Bias mA DC Bias mA 100 NR 6020 1000 NR 6028 NR 6045 1000 1000 NR 8040 220M 100 100 101M 470M 10 100M 101M 470M 100 101M 470M H H H Inductance Inductance Inductance 4R7M 2R2M 10 100M 4R7 2R2 0R9 10 100M 4R5N 2R3N Inductance 220M 220M H 220M 10 100M 4R7N 2R0N 1 0R8N 1 1 1R0N 1 0R9N 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 0.1 10 100 1,000 DC Bias mA 10,000 100,000 0.1 10 100 1,000 DC Bias mA 10,000 100,000 DC Bias mA DC Bias mA 100 NRG 4026 470M Inductance H 220M 10 100M 4R7M 2R3N 1 10 100 1,000 10,000 DC Bias mA This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound04_e-01 127 SMD INDUCTORS SMALL AND LARGE CURRENT TYPE REFLOW FEATURES Small and Low profile inductor. It corresponds to High current. Simple and original magnetic shield structure. Durable structure against dropping impact. APPLICATIONS For small DC/DC converter (cellular Phone, HDD, DVC, DSC, PDA, LCD display etc). ORDERING CODE N R H 2 4 1 0 T T1 Packaging Tape & Reel Blank Space example 0 0 M Inductance tolerance M 20% N 30% Internal code Standard products Blank Space Type NRH NRS Coating resin specification NRV External dimensions WxLxH example Nominal inductance H 2R2 100 101 2.2 10 100 2410 3010 3012 5012 5014 5020 6010 2.4x2.4x1.0mm 3.0x3.0x1.0mm 3.0x3.0x1.2mm 5.0x5.0x1.2mm 5.0x5.0x1.4mm 5.0x5.0x2.0mm 6.0x6.0x1.0mm Rdecimal point EXTERNAL DIMENSIONS/STANDARD QUANTITY L H e W f e W e e Standard Quantity [pcs] Tape & Reel 2500 2000 2000 Standard Quantity [pcs] Tape & Reel 1000 1000 800 1000 L H e e f Type NRH2410 L W H e f Type NRS5012 NRS5014 NRS5020 NRS6010 L W H e e f 2.40.1 2.40.1 1.0 max 0.60.2 1.450.2 0.0950.0040.0950.0040.039 max0.0240.0080.0570.008 1.0 max NRH3010 3.00.1 0.039 max 0.90.2 1.90.2 3.00.1 NRH3012 0.1180.004 0.1180.004 1.2 max 0.0350.0080.0750.008 NRV3012 0.047 max Recommended Land Patterns Unitmm inch 1.2 max 0.047 max 4.90.2 4.90.2 1.4 max 1.20.2 0.30.2 3.30.2 1.30.3 0.1930.008 0.1930.008 0.055 max 0.0470.008 0.0110.008 0.1300.008 0.0510.011 2.0 max 0.079 max 0.30.2 4.00.2 2.30.3 6.00.2 6.00.2 1.0 max 1.350.2 0.2360.0080.2360.008 0.039 max 0.0530.008 0.0110.008 0.1570.008 0.0910.011 NRS6010 4.7 Unitmm inch NRS5012, NRS5014, NRS5020 3.6 2.7 4.0 5.7 NRH2410 1.45 2.0 0.7 0.7 NR3010, NRH3012, NRV3012 2.2 0.8 0.8 1.5 1.5 1.6 1.6 AVAILABLE INDUCTANCE RANGE Range Type Imax [mA] NRH2410 Rdc20 Imax [mA] NRH3010 Rdc20 Imax [mA] NRH3012 Rdc20 Imax [mA] NRV3012 Rdc20 Imax [mA] 2300 NRS5012 Rdc20 Imax [mA] 0.053 NRS5014 Rdc20 Imax [mA] NRS5020 Rdc20 Imax [mA] NRS6010 Rdc20 Inductance H 1.0 1410 2.2 4.7 10 22 100 450 300 0.070 1480 0.065 1710 0.048 1100 0.120 3600 2800 0.045 0.100 1300 900 0.021 1900 0.120 1000 0.260 0.090 0.270 0.690 600 1.47 380 0.350 720 0.770 500 0.270 0.630 850 0.420 1800 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 128 wound05_e-01 PART NUMBERS NRH 2410 Shielded type Ordering code NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T R68NN 4 1R0NN 4 1R5MN 2R2MN 3R3MN 4R7MN 6R8MN 100MN 150MN 220MN EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 120 106 94 77 56 50 43 32 27 22 DC Resistance [] (20%) 0.060 0.070 0.110 0.150 0.220 0.290 0.410 0.690 1.02 1.47 mA Rated current Saturation Temperature rise current current Idc1 Idc2 2,200 1,570 1,800 1,410 1,550 1,160 1,290 970 770 1,000 670 880 570 750 450 550 370 470 300 390 Measuring frequency kHz 100 20 NRH 3010 Type FERRITE PRODUCTS Ordering code NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T 1R2N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.2 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 120 99 86 64 50 44 34 25 22 DC Resistance [] (20%) 0.065 0.075 0.083 0.130 0.170 0.250 0.350 0.550 0.770 20 mA Rated current Saturation Temperature rise current current Idc1 Idc2 1,700 1,480 1,370 1,440 1,300 1,300 1,000 1,030 900 850 745 700 600 620 480 450 410 380 Measuring frequency kHz 100 NRH 3012 Type Ordering code NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 111 95 78 61 50 43 32 26 22 DC Resistance [] (20) 0.048 0.055 0.075 0.100 0.130 0.190 0.270 0.450 0.630 mA Rated current Saturation Temperature rise current current Idc1 Idc2 2,200 1,710 1,600 1,700 1,500 1,370 1,200 1,210 1,060 1,000 890 850 730 720 570 530 500 500 Measuring frequency kHz 100 20 NRV 3012 Type EHS (Environmental Hazardous Substances) RoHS Inductance [H] 2.2 Inductance Tolerance 20 Self-resonant frequency MHz (min.) 70 DC Resistance [] (20) 0.120 mA Rated current Saturation Temperature rise current current Idc1 Idc2 1,800 1,100 Measuring frequency kHz 100 Ordering code NRV3012T 2R2M NRS 5012 Type Ordering code NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 100 86 70 48 40 36 26 DC Resistance [] (20) 0.053 0.070 0.085 0.160 0.180 0.260 0.420 mA Rated current Saturation Temperature rise current current Idc1 Idc2 4,500 2,300 2,200 3,800 3,100 2,000 1,450 2,400 1,400 2,200 1,100 1,700 850 1,400 Measuring frequency kHz 100 20 NRS 5014 Type EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS Inductance [H] 1.2 2.2 3.3 4.7 Ordering code NRS5014T 1R2N NRS5014T 2R2N NRS5014T 3R3N NRS5014T 4R7N Inductance Tolerance Self-resonant frequency MHz (min.) 86 56 48 41 DC Resistance [] (20) 0.045 0.065 mA Rated current Saturation Temperature rise current current Idc1 Idc2 3,800 2,800 2,350 2,050 2,800 2,300 2,100 1,800 Measuring frequency kHz 30 0.080 0.100 100 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound05_e-01 129 PART NUMBERS NRS 5020 Type Ordering code NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T 1R0N 1R5N 2R2N 3R3N 4R7M 6R8M 100M 150M 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance Self-resonant frequency MHz (min.) 81 68 57 46 37 30 24 20 17 DC Resistance [] (20) 0.021 0.026 0.035 0.048 0.060 0.090 0.120 0.165 0.260 mA Rated current Saturation Temperature rise current current Idc1 Idc2 4,000 3,600 3,200 3,350 2,900 2,900 2,400 2,400 2,000 2,000 1,650 1,600 1,300 1,450 1,100 1,200 1,000 900 Measuring frequency kHz 30 100 20 NRS 6010 Type Ordering code NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T 1R5N 2R2N 3R3N 4R7N 6R8N 100M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.5 2.2 3.3 4.7 6.8 10 Inductance Tolerance Self-resonant frequency MHz (min.) 90 65 50 38 30 25 DC Resistance [] (20) 0.090 0.110 0.135 0.165 0.220 0.270 30 20 mA Rated current Saturation Temperature rise current current Idc1 Idc2 2,400 1,900 1,900 1,700 1,600 1,500 1,300 1,400 1,200 1,200 1,000 1,100 Measuring frequency kHz 100 saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 130 wound05_e-01 ELECTRICAL CHARACTERISTICS DC Bias characteristics NRH 2410 100 100 Measured by HP4285A NRH 3010 100 NRH 3012 100 NRV 3012 220M 220M 220M 10 100M 10 100M 10 10 H H H Inductance Inductance Inductance 4R7M 2R2M 2R2M 2R2M Inductance 4R7M 4R7M H 100M 2R2M 1 1R0N 1 1 1R0N 1 FERRITE PRODUCTS 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 DC Bias mA DC Bias mA DC Bias mA DC Bias mA NRS 5012 100 100 NRS 5014 100 NRS 5020 100 NRS 6010 200M 10 100M 10 10 100M 10 100M H H H Inductance Inductance Inductance 4R7M 4R7M 2R2M 2R2N Inductance 4R7M H 4R7M 2R2N 1 1R0N 1 1R2N 1 1R0N 1 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 0.1 10 100 1,000 10,000 DC Bias mA DC Bias mA DC Bias mA DC Bias mA This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound05_e-01 131 PACKAGING Minimum Quantity Type NRH 2410 NR 3010/NRH 3010 NR 3012/NRH3012/NRV3012 NR 3015 NR 4010 NR 4012 NR 4018 NRG4026 NRS5012 NRS5014 NRS5020 NR 5040 NRS6010 NR 6012 NR 6020 NR 6028 NR 6045 NR 8040 Standard Quantity [pcs] Tape Reel 2500 2000 2000 2000 5000 4500 3500 2000 1000 1000 800 1500 1000 1000 2500 2000 1500 1000 Type NR 4010 NR 4012 NR 4018 NRG 4026 NRS 5012 NRS 5014 NRS 5020 5.250.1 5.250.1 0.2070.004 0.2070.004 Chip cavity A B Insertion pitch F Tape thickness T K 1.40.1 0.0550.004 4.30.1 4.30.1 0.1690.004 0.1690.004 1.60.1 0.0630.004 2.10.1 0.0830.004 0.30.05 3.10.1 0.0120.002 0.1220.004 1.40.1 0.0550.004 1.60.1 0.0630.004 2.30.1 0.0910.004 4.20.1 0.1650.004 1.40.1 0.0550.004 1.60.1 0.0630.004 8.00.1 0.3150.004 5.150.1 5.150.1 NR 5040 0.2030.004 0.2030.004 NRS 6010 NR 6012 NR 6020 NR 6028 NR 6045 6.30.1 6.30.1 0.2480.004 0.2480.004 0.40.1 0.0160.004 2.30.1 0.0900.004 Tape Material 3.10.1 0.1220.004 4.70.1 0.1850.004 Unit : mm (inch) Embossed tape 16mm wide (0.63 inches wide) 2.0 0.1 0.079 0.004 4.0 0.1 0.157 0.004 1.5 0.1 0.059 0.004 F CHIP cavity K 1.75 0.1 0.069 0.004 T 16.0 0.3 0.630 0.012 A 7.5 0.1 0.295 0.004 B Electrode bottom view Taping dimensions Embossed tape 8mm wide (0.315 inches wide) 1.5 0.059 0.1 0 0.004 0 Type NR 8040 Chip cavity A B Insertion pitch F Tape thickness T K 0.50.1 (0.0200.004) 4.50.1 (0.1770.004) Unit : mm (inch) CHIP cavity 1.75 0.1 0.069 0.004 K T 12.00.1 8.30.1 8.30.1 (0.3270.004) (0.3270.004) (0.4720.004) 3.5 0.1 0.138 0.004 A B 8.0 0.2 0.315 0.008 Leader and Blank portion NR, NRH, NRS, NRG, NRV Blank portions Chip cavity Blank portions Electrode bottom view Leader F 2.0 0.05 0.079 0.002 4.0 0.1 0.157 0.004 Type NRH 2410 NR 3010 NRH 3010 Chip cavity A B 2.60.1 2.60.1 0.1020.004 0.1020.004 Insertion pitch F Tape thickness T K 0.250.05 1.30.1 0.0090.002 0.0510.004 160mm or more (6.3 inches or more) 100mm or more (3.94 inches or more) 400mm or more (15.8 inches or more) 1.40.1 0.0550.004 4.00.1 NR 3012 3.20.1 3.20.1 0.1570.004 0.30.05 1.60.1 NRH 3012 0.1260.004 0.1260.004 0.0120.002 0.0630.004 NRV3012 NR 3015 1.90.1 0.0750.004 Unit : mm (inch) Direction of tape feed Embossed tape 12mm wide (0.47 inches wide) 0.1 1.5 0 0.004 0.059 0 CHIP cavity 1.75 0.1 0.069 0.004 K T 5.5 0.1 0.217 0.004 A B 12.0 0.3 0.472 0.012 F 2.0 0.1 0.079 0.004 4.0 0.1 0.157 0.004 Electrode bottom view This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0405_pack-P1 wound0405_pack_e-01 PACKAGING Reel size W 2 0.5 13 0.5 2.5 or less 0.098inches or less Reel size (Reference values) d Type NRH2410 NR 3010 NRH 3010 NR 3012 NRH 3012 NRV 3012 NR 3015 NRS 5012 NRS 5014 NRS 5020 NRS 6010 NR 6012 D W 1800.5 7.0870.019 601.0 2.360.04 10.01.5 0.3940.059 1803.0 7.0870.118 602.0 2.360.08 14.01.5 0.5510.059 Unit : mm (inch) W 2 0.5 13 0.5 t Type D Reel size (Reference values) d t (max.) NR 4010 NR 4012 NR 4018 NRG 4026 NR 5040 3303.0 802.0 12.990.118 3.150.078 NR 6020 NR 6028 NR 6045 NR 8040 18.5 0.72 13.51.0 0.5310.04 22.5 0.89 17.51.0 0.6890.04 Unit : mm (inch) Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0405_pack_e-01 D W d D d wound0405_pack-P2 SMD INDUCTORS LARGE CURRENT TYPE FEATURES SMD inductor. It corresponds to High current. Simple and original magnetic shield structure. APPLICATIONS Power supply circuits / DC-DC converters in a variety of applications such as PDP TV, LCD TV, HDD, PC, etc. ORDERING CODE N R1 0 0 5 T 0 T1 Nominal inductance H example 0 0 M Internal code Standard product Blank Space Type NR Coating resin specification Blank Space External dimensions (WxH) example Packaging Tape & Reel Blank Space 10050 10.0x5.0mm Inductance tolerance M 20% N 30% 1R3 100 101 1.3 10 100 Rdecimal point EXTERNAL DIMENSIONS/STANDARD QUANTITY Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to these products is reflow soldering only. AVAILABLE INDUCTANCE RANGE Range Type Imax [A] NR 10050 Rdc30 [m] L a 1.0 Inductance H 9 6.8 W b b 4.5 10 4.1 25 H 2.6 5.4 2.6 Unit : mm Type L W H 5.0 max (0.197 max) a 4.0 0.16 b 1.75 0.07 Standard Quantity [pcs] Tape & Reel 500 Unit : mm (inch) 100 220 1.2 0.8 209 450 10.00.3 9.80.5 NR 10050 0.3940.0120.3860.020 PART NUMBERS NR 10050 type Ordering code NR10050T1R3N NR10050T2R1N NR10050T2R9N NR10050T3R8N NR10050T4R9N NR10050T6R5N NR10050T100M NR10050T150M NR10050T220M NR10050T330M NR10050T470M NR10050T680M NR10050T101M NR10050T221M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.3 2.1 2.9 3.8 4.9 6.5 10 15 22 33 47 68 100 220 Inductance Tolerance Self-resonant frequency [MHz] (min.) 53 37 29 26 23 19 15 11 10 8.2 7.0 5.6 4.6 3.0 DC Resistance [] (30%) 0.0068 0.008 0.0093 0.013 0.015 0.018 0.025 0.035 0.045 0.066 0.092 0.144 0.209 0.450 [mA] Rated current Saturation current Temperature rise current Idc1 Idc2 11000 9000 10000 8300 8200 7300 7300 6800 6600 6000 6000 5200 4700 4100 3600 3200 2600 2500 2500 2100 2000 1800 1700 1500 1300 1200 1000 800 Measuring frequency [kHz] 30 100 20 saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The maximum rated current is the DC current value that satisfies both of current value Saturation current value and temperature rise current value. (at 20) The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 132 wound06_e-01 ELECTRICAL CHARACTERISTICS DC Bias characteristics 1000.0 Measured by HP4285A NR 10050 221M 100.0 101M 680M 470M H Inductance 10.0 330M 220M 150M 100M 6R5N 4R9N 3R8N 2R9N 2R1N 1R3N 1.0 FERRITE PRODUCTS 0.1 0.1 1.0 DC Bias A 10.0 100.0 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound06_e-01 133 PACKAGING Minimum Quantity Type NR 10050 Standard Quantity [pcs] Tape & Reel 500 Top Tape Strength The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below. Tape Material Taping dimensions Embossed tape 24mm wide (0.945 inches wide) 16.0 0.1 0.63 0.004 1.5 0 0.059 0.1 0.004 0 2.0 0.1 0.079 0.004 4.0 0.1 0.157 0.004 F 1.75 0.1 0.069 0.004 K T B A 11.5 0.1 0.453 0.004 24.0 0.945 0.3 0.1 0.012 0.004 Type NR 10050 Chip cavity A 10.40.1 (0.4090.004) B 9.90.1 (0.3900.004) Insertion pitch F 16.00.1 (0.6300.004) Tape thickness T K 0.50.05 (0.0200.002) 5.70.1 (0.2240.004) Unit : mm (inch) Leader and Blank portion Cover Tape Blank portions Chip cavity Blank portions Leader 100 to 200mm 20 to 30 pockets 40 to 50 pockets 3.94 to 7.87 inches Direction of tape feed 1role of reel Reel size 25.5 1.0 1.004 0.04 2 0.5 0.079 0.020 13 0.5 0.512 0.020 t Type NR 10050 D 3303 (12.990.118) Reel size (Reference values) d 802 (3.150.078) t (max.) 30.5 (1.201) Unit : mm (inch) This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound06_pack_e-01 D d wound06_pack-P1 SMD INDUCTORS COMPACT TYPE REFLOW FEATURES BR C2518/BRFL2518 (NEW PRODUCTS) The best efficiency design is achieved by adopting bottom-surface electrode structure.Small and low-profile Wound Chip Inductors that are suitable for module design which needs high electric current like DC/DC converters. APPLICATIONS For small DC/DC converter (cellular phone, HDD, DVC, DSC, PDA, LCD display etc). ORDERING CODE B BR R2 5 1 8 T 2 T R 2 M Inductance tolerance M 20% K 10% Type SMD Inductors Characteristic Spec Low Rdc L Low profile C High Current FL Low profile External Dimensions (WxL) : mm (inch) 1608 (0603) 1.6x0.8mm 2012 (0805) 2.0x1.2mm 2016 (0806) 2.0x1.6mm 2518 (1007) 2.5x1.8mm 3225 (1210) 3.2x2.5mm Packaging Tape & Reel Nominal Inductance H example R20 1R0 2R2 4R7 0.2 1.0 2.2 4.7 Internal code Standard product Blank Space Rdecimal point EXTERNAL DIMENSIONS/STANDARD QUANTITY L W Type BR C1608 L W H e Standard Quantity [pcs] Embossed Tape Paper Tape 3000 3000 2000 2000 3000 3000 2000 Unit : mm (inch) H e 1.60.2 0.80.2 0.80.2 0.450.15 0.0630.008 0.0310.008 0.0310.008 0.0160.006 1.0 max. 0.50.2 2.00.2 1.250.2 0.0780.008 0.0490.008 0.040 max. 0.0200.008 2.00.2 1.60.2 1.60.2 0.50.2 0.0780.008 0.0630.008 0.0630.008 0.0200.008 2.50.2 1.80.2 1.80.2 0.50.2 0.0980.008 0.0710.0080.0710.008 0.0200.008 1.2 max. 0.50.2 2.50.2 1.80.2 0.0980.008 0.0710.008 0.048 max. 0.0200.008 2.50.2 1.80.2 1.0 max. 0.50.2 0.0980.008 0.0710.008 0.040 max. 0.0200.008 3.20.2 2.50.2 1.7 max. 0.750.2 0.1260.008 0.0980.008 0.068 max. 0.0300.008 BR L2012 BR C2016 BR C2518 Recommended Land Patterns Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to this products is reflow soldering only. BR L2518 BRFL2518 BR L3225 C A B A Type 1608 2012 2016 2518 3225 A 0.55 0.65 0.70 0.65 1.00 B 0.80 0.90 0.80 1.50 1.60 C 0.90 1.40 1.80 1.95 2.70 Unit : mm AVAILABLE INDUCTANCE RANGE Range Type Imax [mA] BR L3225 Rdc30 Imax [] [mA] BRFL2518 Rdc30 Imax [] [mA] BR L2518 Rdc30 Imax [] [mA] BR C2518 Rdc30 Imax [] [mA] BR C2016 Rdc30 Imax [] [mA] 1,050 Inductance H BR L2012 Rdc30 Imax [] [mA] 0.47H 0.090 0.135 980 520 280 BR C1608 Rdc30 [] 0.060 0.180 2.2H 0.550 0.2H 1.0 2.2 4.7 2,200 1H 0.043 1,200 850 1H 0.080 0.135 1,000 850 470 1H 0.080 0.135 0.400 1,650 1H 0.050 1,100 1H 0.085 850 650 700 0.350 4.7H 0.330 4.7H 10 22 47 610 0.350 520 0.400 270 0.850 100 220 250 100H 2.50 190 100H 3.60 170 100H 3.40 85 100H 7.70 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 134 wound07_e-01 PART NUMBERS BR C1608 type Ordering code BR BR BR BR BR BR BR BR C1608TR20M C1608TR35M C1608TR45M C1608TR56M C1608TR77M C1608T1R0M C1608T1R5M C1608T2R2M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.20 0.35 0.45 0.56 0.77 1.00 1.50 2.20 Inductance Tolerance Self-resonant DC Resistance frequency [] (30%) [MHz] (min.) 400 300 200 170 150 140 120 100 0.060 0.080 0.090 0.095 0.110 0.180 0.300 0.550 [mA] Rated current Measuring Saturation current Temperature rise current frequency [MHz] Idc1 Idc2 1,750 980 1,400 810 1,250 800 1,150 760 7.96 1,000 660 850 520 700 410 550 280 20 BR L2012 type Ordering code BR L2012TR47M BR L2012T1R0M BR L2012T1R5M BR L2012T2R2M BR L2012T3R3M BR L2012T4R7M BR L2012T6R8M BR L2012T100M BR L2012T150M BR L2012T220M BR L2012T330M BR L2012T470M BR L2012T680M BR L2012T101M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant DC Resistance frequency [] (30%) [MHz] (min.) 350 300 250 200 190 150 60 30 15 13 8.0 7.0 6.5 6.0 0.090 0.135 0.180 0.300 0.500 0.550 0.750 0.850 1.00 1.30 2.00 3.50 5.80 7.70 [mA] Rated current Measuring Saturation current Temperature rise current frequency [MHz] Idc1 Idc2 1,100 1,050 850 850 700 750 7.96 600 550 490 440 340 400 350 290 330 270 300 220 270 190 2.52 220 150 160 125 110 100 85 85 0.796 FERRITE PRODUCTS 20 BR C2016 type Ordering code BR BR BR BR BR BR BR BR BR BR BR BR BR C2016T1R0M C2016T1R5M C2016T2R2M C2016T3R3M C2016T4R7M C2016T6R8M C2016T100 C2016T150 C2016T220 C2016T330 C2016T470 C2016T680 C2016T101 EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant DC Resistance frequency [] (30%) [MHz] (min.) 450 370 250 140 78 39 35 28 24 13 11 8 7 0.085 0.150 0.180 0.220 0.270 0.330 0.400 0.600 1.00 1.70 2.20 2.80 3.40 [mA] Rated current Measuring Saturation current Temperature rise current frequency [MHz] Idc1 Idc2 1,350 1,100 1,100 820 910 760 740 680 610 660 560 550 450 520 0.10 410 400 310 310 240 270 210 210 200 190 140 170 20 20 10 BR C2518 type Ordering code BR BR BR BR BR BR BR BR BR BR BR BR BR C2518T1R0M C2518T1R5M C2518T2R2M C2518T3R3M C2518T4R7M C2518T6R8M C2518T100 C2518T150 C2518T220 C2518T330 C2518T470 C2518T680 C2518T101 EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant DC Resistance frequency [MHz] (min.) [] (30%) 280 230 200 150 100 45 20 13 10 8 6.5 5.5 4.5 0.050 0.080 0.120 0.175 0.230 0.280 0.350 0.43 0.56 0.85 1.45 2.40 3.60 Rated current [mA] Saturation Temperature rise current current Idc1 Idc2 2,550 1,650 2,100 1,300 1,800 1,000 1,450 860 1,250 750 1,050 680 890 610 550 760 490 640 390 560 300 410 230 340 300 190 Measuring frequency [MHz] 20 1.00 20 10 Please specify the inductance tolerance code. (M or K) saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound07_e-01 135 PART NUMBERS BR L2518 type Ordering code BR BR BR BR BR L2518T1R0M L2518T1R5M L2518T2R2M L2518T3R3M L2518T4R7M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 Inductance Tolerance Self-resonant DC Resistance frequency [MHz] (min.) [] (30%) 130 100 80 70 60 0.080 0.100 0.135 0.300 0.400 Rated current [mA] Saturation Temperature rise current current Idc1 Idc2 1,300 1,000 1,200 920 900 850 750 580 650 470 Measuring frequency [MHz] 20 7.96 BRFL2518 type Ordering code BRFL2518T1R0M BRFL2518T1R5M BRFL2518T2R2M BRFL2518T3R3M BRFL2518T4R7M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 Inductance Tolerance Self-resonant DC Resistance frequency [MHz] (min.) [] (30%) 130 100 80 70 60 0.090 0.110 0.130 0.220 0.330 Rated current [mA] Saturation Temperature rise current current Idc1 Idc2 1,200 1,200 1100 1000 850 950 700 700 650 650 Measuring frequency [MHz] 20 1.00 BR L3225 type Ordering code BR BR BR BR BR BR BR BR BR BR BR BR BR L3225T1R0M L3225T1R5M L3225T2R2M L3225T3R3M L3225T4R7M L3225T6R8M L3225T100 L3225T150 L3225T220 L3225T330 L3225T470 L3225T680 L3225T101 EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Inductance Tolerance Self-resonant DC Resistance frequency [MHz] (min.) [] (30%) 220 170 150 140 120 90 70 20 13 9 7 6 5 0.043 0.045 0.065 0.120 0.180 0.270 0.350 0.570 0.690 0.840 1.00 1.40 2.50 Rated current [mA] Saturation Temperature rise current current Idc1 Idc2 2,400 2,200 2,200 1,750 1,850 1,600 1,450 1,200 1,300 1,000 770 1,050 900 700 530 700 470 550 420 470 420 390 330 300 270 250 Measuring frequency [MHz] 20 0.10 20 10 Please specify the inductance tolerance code. (M or K) saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. The This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 136 wound07_e-01 ELECTRICAL CHARACTERISTICS DC Bias characteristics BRL3225 10 101 Measured by HP4285A BRFL2518 10 4R7M BRL2518 10 4R7M BRC2518 100 101 H H H H Inductance Inductance 100 Inductance 10 1 1R0M 1 1R0M 1 1R0M Inductance 2R2M 2R2M 10 100 1 1R0M 0.1 1 10 100 1000 DC BIAS mA 10000 0.1 1 10 100 1000 DC BIAS mA 10000 0.1 1 10 100 1000 DC BIAS mA 10000 0.1 1 10 100 1000 DC BIAS mA 10000 BRC2016 100 101 BRL2012 1000 10 BRC1608 FERRITE PRODUCTS H H 100 H Inductance Inductance Inductance 10 101M 2R2M 100 10 1 R77M 100M 1 1R0M 1 1R0M R20M 0.1 1 10 100 1000 DC BIAS mA 10000 0.1 0.1 1 10 100 1000 DC BIAS mA 10000 1 10 100 1000 DC BIAS mA 10000 Impedance-vs-Frequency characteristics BRL3225 100000 101 Measured by HP4291A BRFL2518 10000 4R7M 2R2M BRL2518 10000 4R7M 2R2M BRC2518 100000 101 10000 1000 100 10 1 1 10 100 100 10000 1000 1R0M 100 1000 1R0M Impedance Impedance Impedance Impedance 1000 1R0M 1R0M 100 100 100 10 1 10 1 10 1 1000 10000 1 Frequency MHz 10 100 1000 Frequency MHz 10000 1 10 100 Frequency MHz 1000 1 10 100 1000 10000 Frequency MHz BRC2016 100000 10000 1000 Impedance Impedance 100 10 1 0.1 0.1 1 10 100 1000 1R0M 101 100 BRL2012 100000 10000 1000 1000 101M 100M 1R0M BRC1608 10000 2R2M 1000 Impedance R77M 100 R20M 10 1 10 1 1 10 100 1000 Frequency MHz 1 10 100 1000 Frequency MHz Frequency MHz This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound07_e-01 137 PACKAGING Minimum Quantity Type BR C1608 BR L2012 BR C2016 BR C2518 BR L2518 BRFL2518 BR L3225 Standard Quantity [pcs] Paper Tape Embossed Tape 3,000 3,000 2,000 2,000 3,000 3,000 2,000 Reel size 2.5 or less 0.098max ) 0.039 0 0 0.118 2.36 1 0 Tape Material 10.0 1.5 (0.394 0.059) Top Tape Strength The top tape requires a peel-off force of 0.2 to 0.7N in the direction of the arrow as illustrated below. Taping dimensions Embossed Tape 8mm wide (0.315 inches wide) Card board carrier tape 8mm wide (0.315 inches wide) Type BR C1608 BR L2012 BR C2016 BR C2518 BR L2518 BRFL2518 BR L3225 Chip cavity A B Insertion pitch F Tape thickness T K 1.2 max. 0.047 1.2 max. 0.048 1.9 max. 0.074 1.00.10 1.91.0 4.00.1 0.250.05 0.040.004 0.0760.004 0.1570.004 0.010.002 1.400.1 2.20.1 4.00.1 0.250.05 0.0560.0040.0880.0040.1570.004 0.010.002 1.750.1 2.10.1 4.00.1 0.30.05 0.0690.0040.0830.0040.1570.004 0.0120.002 2.150.1 2.70.1 4.00.1 0.30.05 2.2 max. 0.0850.0040.1070.004 0.1570.004 0.0120.002 0.086 2.30.1 2.80.1 4.00.1 0.30.05 1.45 max. 0.0920.0040.1120.004 0.1570.004 0.0120.002 0.057 2.150.1 2.80.1 4.00.1 0.250.05 0.0850.0040.1120.004 0.1570.0040.010.002 2.80.1 3.50.1 4.00.1 0.250.05 0.1120.004 0.1400.004 0.1570.004 0.010.002 1.25 max. 0.049 1.9 max. 0.074 Unit : mm (inch) Leader and Blank portion Blank portions Chip cavity Blank portions Leader 160 to 320mm 6.3 to 12.8 inches 160 to 200 mm 6.3 to 7.87 inches Direction of tape feed 400 to 560 mm 16.0 to 22.4 inches This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound07_pack_e-01 180 60 0 3 7.09 ) wound07_pack-P1 RELIABILITY DATA 1. Operating Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks Including self-generated heat 25 25 25 105 120 105 2. Storage Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, 40 85 NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40 NR10050 Type : 0 40 for the product with taping. 3. Rated current BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type for the product with taping. 4. Inductance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V NR10050 Type : LCR Meter : HP 4263A or equivalent, 100KHz, 1V 5. DC Resistance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks DC ohmmeter : HIOKI 3227 or equivalent 6. Self resonance frequency BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specification NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent 7. Temperature characteristic BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518 Inductance change : Within 15% BRC1608 Inductance change : Within 20% NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Inductance change : Within 20% NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Measurement of inductance shall be taken at temperature range within 25 85 . With reference to inductance value at 20 ., change rate shall be calculated. Change of maximum inductance deviation in step 1 to 5 Temperature at step 1 Temperature at step 2 Temperature at step 3 Temperature at step 4 Temperature at step 5 20 Minimum operating temperature 20 (Standard temperature) Maximum oparating temperature 20 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli-RP1 wound0407_reli_e-01 RELIABILITY DATA 8. Resistance to flexure of substrate BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type No damage. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm. Force Rod 20 10 Test board size : 100 40 1.0 R230 Test board material : glass epoxy-resin Solder cream thickness : 0.12 (BR Series) Board 0.10 (NR30/40, NRV30, NRH24/30,NRG40) Test Sample R5 0.15 (NR50/60/80, NRS50/60) 45 2mm 45 2mm Land dimension BRC1608 0.9 0.55 0.8 0.55 Land dimension BRL2012 Land dimension BRL3225 2.7 1.0 1.6 1.0 Land dimension NR30, NRH30, NRV30 2.7 0.8 1.4 0.8 Land dimension NR60, NRS60 5.7 1.6 3.1 1.6 Land dimension NR, NRS50 4.0 1.5 2.1 1.5 1.4 0.65 0.9 0.65 Land dimension 2016 1.8 Land dimension BRL2518,BRC2518,BRFL2518 1.95 0.65 1.5 0.65 Land dimension NRH24 2.0 0.7 0.75 0.7 Land dimension NR40, NRG40 3.7 1.2 1.6 1.2 Land dimension NR80 7.5 1.8 3.8 1.8 0.7 0.8 0.7 Printed board thickness : 1.0mm Unit : mm 9. Insulation resistance : between wires BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 10. Insulation resistance : between wire and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 11. Withstanding voltage : between wires and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 12. Adhesion of terminal electrode BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Shall not come off PC board. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. Applied force : 10N to X and Y directions. Duration : 5s. 10N, 5s Solder cream thickness : 0.15mm. BRC1608, NR10050 Type : Applied force : 5N to X and Y directions. Duration : 5s. 13. Resistance to vibration BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. Then it shall be submitted to below test conditions. Frequency Range Total Amplitude Sweeping Method Time 10 55Hz 1.5mm (May not exceed acceleration 196m/s2) 10Hz to 55Hz to 10Hz for 1min. X Y For 2 hours on each X, Y, and Z axis. Z Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli_e-01 wound0407_reli-RP2 RELIABILITY DATA 14. Solderability BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, At least 90 of surface of terminal electrode is covered by new solder. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type : The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : Solder Temperature Time 245 5 5 1.0 sec. BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Solder Temperature Time 245 5 5 0.5 sec. Immersion depth : All sides of mounting terminal shall be immersed. 15. Resistance to soldering heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : 0 3 times of reflow oven at 230 MIN. for 40sec. with peak temperature at 260 5 for 5sec. for 5 seconds, 2 times. for 5 seconds, 2 times. : NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type The test sample shall be exposed to reflow oven at 230 5 for 40 seconds, with peak temperature at 260 5 NR6020 Type : The test sample shall be exposed to reflow oven at 230 5 Test board thickness : 1.0mm Test board material : glass epoxy-resin for 40 seconds, with peak temperature at 250 0 5 16. Thermal shock BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles. Step 1 2 3 4 Conditions of 1 cycle Temperature ( ) Duration (min) 40 3 Room temperature 85 2 Room temperature 30 3 Within 3 30 3 Within 3 17. Damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Humidity Time 60 2 90 95%RH 1000 hours. Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Temperature Humidity Time 60 2 90 95%RH 500 24hour This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli-RP3 wound0407_reli_e-01 RELIABILITY DATA 18. Loading under damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Humidity Applied current Time 60 2 90 95 RH Rated current 1000hours. Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table. Temperature Humidity Applied current Time 60 2 90 95 RH Rated current 500 2hour 19. Low temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Duration 40 2 1000hours Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown in below table. Temperature Time 40 3 500 24hour 20. High temperature life test BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within 10% BRFL2518, BRL2518, BRL3225 Type No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Inductance change : Within 10% NR10050 Type No significant abnormality in appearance. Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Duration 85 2 1000hours Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR10050 Type : Temperature Time 105 3 500 24hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 21. Loading at high temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Inductance change : Within 10% NRH24/30, NRS50/60 Type No significant abnormality in appearance. NR10050 Type Test Method and Remarks NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow soldering. Temperature Applied current Time 85 2 Rated current 500 24hour 22. Standard condition BRC1608, BRL2012, BRC2016, BRC2518, Standard test condition : BRFL2518, BRL2518, BRL3225 Type Unless otherwise specified, temperature is 20 15 and 65 20 of relative humidity. When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20 2 NR30/40/50/60/80, NRV30, NRG40, of temperature, 65 5% relative humidity. NRH24/30, NRS50/60 Type Inductance is in accordance with our measured value. NR10050 Type This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli_e-01 wound0407_reli-RP4 PRECAUTIONS SMD Inductors 1. Circuit Design Operating environment 1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high Precautions reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design Precautions Technical considerations Land pattern design 1. Please refer to a recommended land pattern. Land pattern design Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to this products is reflow soldering only. 3. Considerations for automatic placement Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. Precautions 2. Mounting and soldering conditions should be checked beforehand. Technical Adjustment of mounting machine consider1. When installing products, care should be taken not to apply distortion stress as it may deform the products. ations 4. Soldering Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. This products is reflow soldering only. 3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering. Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. Recommended conditions for using a soldering iron (NR10050 Type) Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350 Duration - 3 seconds or less The soldering iron should not directly touch the inductor. Reflow soldering 1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. BRC1608, BRL2012, BRL2518, BRC2016, BRL3225 Type BRC2518, BRFL2518 Recommended reflow condition (Pb free solder) Technical considerations 300 Temperature 200 100 0 150 180 5sec max Peak 260 0/ 5 30 10sec 230 min Precautions NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Recommended reflow condition (Pb free solder) 300 Temperature 200 100 0 150 180 5sec max Peak 250 5/ 0 30 10sec 230 min NR10050 Type Recommended reflow condition (Pb free solder) 300 Temperature 200 100 0 150 180 5sec max Peak 250 0/ 5 30 10sec 230 min 90 30sec 90 30sec 90 30sec eating Time sec eating Time sec eating Time sec 5. Cleaning Precautions Technical considerations 6. Handling Handling 1. Keep the product away from all magnets and magnetic objects. Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1. Please do not give the product any excessive mechanical shocks. 2. Please do not add any shock and power to a product in transportation. Pick-up pressure 1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. Packing 1. Please avoid accumulation of a packing box as much as possible. Breakaway PC boards (splitting along perforations) 1. Planning pattern configurations and the position of products should be carefully performed to minimize stress. Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 2. There is a case to be broken by the handling in transportation. Pick-up pressure 1. Damage and a characteristic can vary with an excessive shock or stress. Packing 1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box. Cleaning conditions 1. Washing by supersonic waves shall be avoided. Cleaning conditions 1. If washing by supersonic waves, supersonic waves may cause broken products. Precautions Technical considerations 7. Storage conditions Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Precautions Recommended conditions Ambient temperature : 0 40 Humidity : Below 70% RH The ambient temperature must be kept below 30 . Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. Technical considerations This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli-RP5 wound0407_reli_e-01 |
Price & Availability of LBC2518T100 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |