View LO566QBL4-60H-A-MT_4539516.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LO566QBL4-60H-A-MT LO566QBL4-60H-A-MT 01 2005-01-14
Description: 60 Degree 5mm Oval LED Lamp in Blue Color with Tinted Diffused Lens and No Stopper *This specification is only for MT Dice Material: InGaN
Confirmed by Customer: Date:
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC SENSITIVE DEVICES
Pb Free
Document No. SPE/LO566QBL4-60H-A-MT Rev. No. 01 Applications: Dimension Drawing
-
Variable Message Signs Message Board
Absolute Maximum Ratings at Ta = 25C Items
Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute maximum Rating 25 100 5 105 -40 ~ +95 -40 ~ +100
Unit mA mA V mW
C C
Max.260C for 3 sec Max.
(3mm from the base of the epoxy bulb)
*pulse width <=0.1msec duty <=1/10
Typical Electrical & Optical Characteristics ( Ta = 25C) )
Items Forward Voltage Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity
Symbol VF VF IR D IV 21/2H-H
Condition IF = 20mA IF = 1.0A VR = 5V IF = 20mA IF = 20mA IF = 20mA IF = 20mA
Min. --1.7 --465 550 -----
Typ. 3.6 ----470 880 60 35
Max. 4.2 2.5 100 475 -------
Unit V V A nm mcd deg deg
50% Power Angle 21/2V-V
2/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LO566QBL4-60H-A-MT Rev. No. 01 Standard bins for LO566QBL4-60H-A-MT (IF = 20mA):
Lamps are sorted to Luminous Intensity -IV , VF & Dominant Wavelength -D bins shown. Orders for LO566QBL4-60H-A-MT may be filled with any or all bins contained as below. All Luminous Intensity -IV , VF & Dominant Wavelength -D values shown and specified are at IF =20mA.
* R+
X4 X5
1520mcd Luminous Intensity (IV) T 1100mcd S 770mcd R 550mcd 465nm 470nm Dominant Wavelength (D) 475nm
* R+ indicates Luminous Intensity is at R bin or above.
Forward Voltage (VF) Rank Voltage Important Notes:
1) All ranks will be included per delivery, rank ratio will be determined by Cotco. 2) Pb content <1000PPM. 3) Tolerance of measurement of luminous intensity is 15%. 4) Tolerance of measurement of dominant wavelength is 1nm. 5) Tolerance of measurement of Vf is 0.05 V. 6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions.
V9 3.2-3.4 V
V10 3.4-3.6 V
V11 3.6-3.8 V
V12 3.8-4.0 V
V13 4.0-4.2 V
3/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LO566QBL4-60H-A-MT Rev. No. 01
Graphs
If (mA) 100.0 80.0 60.0 40.0 20.0 0.0 3.2 Vf(V)
Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0
3.6 4.0 4.4 4.8 5.2 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Half Power WL=28nm Domi WL= 470nm
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% WL(nm) 400 500 600 700 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 0% 300
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
IF(mA) 50 40 30 20 10
Rj-a=460 C/W Rj-pin=250 C/W
50% Power Angle :
H-H : 60 V-V : 35 Ie(%)
H-H
V-V
0
100%
80%
60%
40%
0
T ( C) 80.0 100.0
-90 -60 -30 0 30 60 90
20%
0.0
20.0 40.0 60.0
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
FIG.6 FAR FIELD PATTERN
1. Cathode PAD Area (0.18 x 0.18inch2) 2. Height above nominal seating plane in inches(0.3inch)
Items Prepared by Checked by Approved by ECN#
Signatures
LiuZM MaJF David
Date
2005-01-14 2005-01-14 2005-01-14 Rev. No Date
Revision History
Change Description
ECN-H20050016
Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4

▲Up To Search▲

Price & Availability of LO566QBL4-60H-A-MT

	To Download LO566QBL4-60H-A-MT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .