|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
A_D-1W & B_LD-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER FEATURES High Efficiency up to 80% 1KVDC Isolation DIP Package Internal SMD Construction Temperature Range: -40C ~ +85C No Heat sink Required No External Component Required Industry Standard Pinout RoHS Compliance RoHS S PRODUCT PROGRAM Input Part Number B0303LD-1W B0305LD-1W A0505D-1W A0509D-1W A0512D-1W A0515D-1W B0505LD-W5 B0505LD-1W B0509 LD-1W B0512 LD-1W B0515 LD-1W A1205D-1W A1209D-1W A1212D-1W A1215D-1W B1203 LD-1W B1205 LD-1W B1209 LD-1W B1212 LD-1W B1215 LD-1W A1505D-1W B1515LD-1W A2405D-1W A2409D-1W A2412D-1W A2415D-1W B2405 LD-1W B2409 LD-1W B2412 LD-1W B2415 LD-1W B2424LD-1W Voltage (VDC) Nominal 3.3 Range 3.0-3.6 Voltage (VDC) 3.3 5 5 9 12 15 5 5 9 12 15 5 9 12 15 3.3 5 9 12 15 5 15 5 9 12 15 5 9 12 15 24 Output Current (mA) Max 303 200 100 56 42 33 100 200 111 83 67 100 56 42 33 303 200 111 83 67 100 67 100 56 42 33 200 111 83 67 42 Min 31 20 10 6 5 4 10 20 12 9 7 10 6 5 4 31 20 12 9 7 10 7 10 6 5 4 20 12 9 7 4 72 74 72 77 79 80 68 70 78 78 80 72 78 79 78 73 71 76 78 79 72 75 73 79 80 80 73 78 78 79 78 Efficiency Certificate (%, Typ) UL UL UL UL UL CE UL CE UL CE UL CE UL UL UL UL UL CE UL CE UL CE UL CE 5 4.5-5.5 APPLICATIONS The A_D-1W & B_LD-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation 10%); 2) Where isolation is necessary between input and output (isolation voltage 1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. 12 10.8-13.2 15 13.5-16.5 24 21.6-26.4 MODEL SELECTION A0505D-1W Rated Power Package Style Output Voltage Input Voltage Product Series UL UL UL UL UL CE UL CE UL CE UL CE Note: The A_D-W 25/B_LD-W25 series also are available in our company. COMMON SPECIFICATIONS Item Operating Temp. Storage Temp. Range Storage humidity Cooling Temp. rise at full load Lead temperature Isolation voltage Isolation resistance Short circuit protection* Case material MTBF Weight Test conditions Max Units 85 C 125 95 % Free air convection 15 25 C 300 1000 VDC 1000 M 1 s Plastic (UL94-V0) 3500 K hours 2.1 G Min -40 -55 Typ MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 http://www.mornsun-power.com 1.5mm from case for 10 seconds Tested for 1 minute and 1 mA max Test at 500VDC *supply voltage must be discontinued at the end of short circuit duration. MORNSUN reserves the copyright Specifications subject to change without notice. A_D-1W & B_LD-1W A/2-2008 Page 1 of 2 OUTPUT SPECIFICATIONS Item Output power Line regulation Test conditions For Vin change of 1% (3.3V output) (Other output) (3.3V output) (5V output) (9V output) (12V output) (15V output) Min 0.1 Max Units 1 W 1.5 1.2 12 20 % 10.5 15 8.3 15 6.8 15 6.3 15 See tolerance envelope graph 0.03 %/C 50 75 mVp-p 75 100 100 150 100 KHz Typ Overload Protection Under output protection normal circuit of against operating these overload. conditions, has The the no products simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Recommended circuit If you want to further Load regulation 10% to 100% load decrease the Output voltage accuracy Temperature drift 100% full load (AXXXXD-1W) Ripple & Noise* (BXXXXD-1W) (A/BXX24D-1W) Switching frequency Full load, nominal input 20MHz Bandwidth input/output ripple, an "LC" filtering network may be connected to the input and output ends of the DC/DC converter, see (Figure 1). Dual Output L L Vin Cin +Vo Cout *Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1.All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2.Dual output models unbalanced load: 5%. DC DC GND Single Output L L Cout 0V -Vo L Vin Cin +Vo DC DC (Figure 1) Cout GND TYPICAL CHARACTERISTICS 0V It should also be noted that the inductance and the frequency of the "LC" filtering network should be staggered with the DC/DC frequency to avoid mutual interference. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the recommended capacitance of its Operating Temp.(oC) filter capacitor sees (Table 1). EXTERNAL CAPACITOR TABLE (TABLE 1) OUTLINE DIMENSIONS & PIN CONNECTIONS First Angle Projection RECO MMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Dual Output Vin (VDC) 5 12 15 24 Cin (uF) 4.7 2.2 2.2 1 Single Cout Vout (uF) (VDC) 5 10 9 4.7 12 2.2 15 1 Dual Cout Vout (uF) (VDC) 5 4.7 9 2.2 12 1 15 0.47 14 1 11 98 7 It's not recommended to connect any external capacitor in the application field with less than 0.5 watt output. Single Output 14 1 14 11 7 1 98 FO OTPRINT DETAILS Pin 1 Note: Unit:mm(inch) Pin section:0.50*0.30mm( 0.020*0.012inch) Pin tolerances: 0.10mm( 0.004inch) General tolerances: 0.25mm( 0.010inch) 8 9 11 Single GND NC 0V +Vo No Pin Vin Dual GND NC 0V +Vo -Vo Vin 7 98 Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure 2). D ual Output Vin GND Single Output Vin GND REG REG REG REG +Vout 0V DC DC REG -Vout +Vout APPLICATION NOTE Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company's products with a lower rated output power (A_D -W25/B_LD-W25 series) DC DC 0V (Figure 2) No parallel connection or plug and play. MORNSUN reserves the copyright Specifications subject to change without notice. A_D-1W & B_LD-1W A/2-2008 Page 2 of 2 |
Price & Availability of A1212D-1W |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |