 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DG4599 Vishay Siliconix Low-Voltage Single-Supply, SPDT Analog Switch in SC-70 DESCRIPTION The DG4599 is a cost effective upgrade to other types of 4599 low-voltage, single-pole/double-throw analog switches available in the industry today. Combining low power, high speed, low on-resistant and small physical size, the DG4599 is ideal for portable and battery powered applications. The DG4599 is built on Vishay Siliconix's low voltage CMOS process. An epitaxial layer prevents latchup. Break-before make is guaranteed for DG4599. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. FEATURES 6-Pin SC-70 Package 60 Max. (26 Typ.) On-Resistance 2 Typ. RON Flatness Fast Switching: tON = 30 ns (Max.) tOFF = 25 ns (Max.) * 2.25 V to 5.5 V Single Supply Operation * Break-Before-Make Switching * TTL/CMOS-Logic Compatible * * * * Pb-free Available RoHS* COMPLIANT BENEFITS * * * * Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space APPLICATIONS * * * * * * Battery-Operated Equipment Audio and Video Signal Routing Cellular Phones Low-Voltage Data-Acquistion Systems Sample-and-Hold Circuits Communications Systems FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION TRUTH TABLE SC-70 IN V+ GND 1 2 3 Top View Device Marking: 4J 6 5 4 NO (Source1) COM NC (Source2) Logic 0 1 Logic "0" 0.8 V Logic "1" 2.4 V NC ON OFF NO OFF ON ORDERING INFORMATION Temp Range - 40 to 85 C Package SC70-6 Part Number DG4599DL-T1 DG4599DL-T1-E3 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 72218 S-70852-Rev. C, 30-Apr-07 www.vishay.com 1 DG4599 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Parameter Referenced V+ to GND IN, COM, NC, NOa Continuous Current (Any Terminal) Peak Current (Pulsed at 1 ms, 10 % duty cycle) Storage Temperature (D Suffix) Power Dissipation (Packages)b 6-Pin SO70c Limit - 0.3 to + 6 - 0.3 to (V+ + 0.3) 50 200 - 65 to 125 250 Unit V mA C mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/C above 25 C. SPECIFICATIONS (V+ = 5 V) Test Conditions Otherwise Unless Specified V+ = 5 V, 10 %, VIN = 0.8 or 2.4 Ve Limits - 40 to 85 C Tempa Minb Typc Maxb Unit Parameter Analog Switch Analog Signal Ranged Drain-Source On-Resistance rDS(on) Flatnessd Symbol VNO, VNC VCOM rDS(on) rDS(on) Flatness IS(off) Full V+ = 4.5 V, VD = 3 V, IS = 10 mA V+ = 2.5 V V+ = 5.5 V VS = 1 V/4.5 V, VD = 4.5 V/1 V V+ = 5.5 V, VS = VD = 1 V/4.5 V Room Full Room Room Full Room Full Room Full Full Full Full VIN = 0 or V+ Full Room Full Room Full Room CL = 1 nF, VS = 0 V VGEN = 0 V, RGEN = 0 , Figure 3 RL = 50 , CL = 5 pF, f = 1 MHz Room Room Room Room VIN = 0 or V+, f = 1 MHz Room Room 0 7 10 2 - 1.0 - 4.0 - 1.0 - 4.0 - 1.0 - 3.0 2.4 V+ 60 65 V Switch Off Leakage Current ID(off) Channel-On Leakage Current Digital Control Input High Voltage Input Low Voltage Input Capacitance Input Current Dynamic Characteristics Turn-On Timed Turn-Off Timed Break-Before-Make Timed Charge Injectiond Off-Isolationd Crosstalk d 1.0 4.0 1.0 4.0 1.0 4.5 nA ID(on) VINH VINL Cin IINL or IINH 0.8 3 -1 9 5 1 4 5 - 73 - 70 7 20 20 4.5 5.5 0.01 1.0 5.5 10 1 30 40 25 30 V pF A tON tOFF td QINJ OIRR XTALK CS(off) CD(on) d VD or VS = 3 V, RL = 300 , CL = 35 pF Figures 1 and 2 ns pC dB Source-Off Capacitanced Channel-On Capacitanced pF Drain-to-Source Capacitance Power Supply Power Supply Range Power Supply Current Power Consumption CDS(off) V+ I+ PC VIN = 0 or V+ V A W www.vishay.com 2 Document Number: 72218 S-70852-Rev. C, 30-Apr-07 DG4599 Vishay Siliconix SPECIFICATIONS (V+ = 3 V) Test Conditions Otherwise Unless Specified V+ = 3 V, 10 %, VIN = 0.4 or 2.0 Ve Limits - 40 to 85 C Tempa Minb Typc Maxb Unit Parameter Analog Switch Analog Signal Ranged Drain-Source On-Resistanced rDS(on) Flatnessd Digital Control Input High Voltage Input Low Voltage Input Current Dynamic Characteristics Turn-On Timed Turn-Off Timed Break-Before-Make Timed Charge Injectiond Power Supply Power Supply Range Power Supply Current Power Consumption Symbol VNO, VNC VCOM rDS(on) rDS(on) Flatness VINH VINL IINL or IINH Full V+ = 2.7 V, VD = 1.5 V, IS = 10 mA VS = 0 to V+, IS = 10 mA Room Full Room 0 15 19 7.5 V+ 95 105 V Full Full VIN = 0 or V+ Full Room Full Room Full Room CL = 1 nF, VGEN = 0 V, VS = 0 V RGEN = 0 , Figure 3 Room 2 0.8 -1 12 6 1 7 5 10 1 45 55 35 40 V A tON tOFF td QINJ VD or VS = 2.0 V, RL = 300 , CL = 35 pF Figures 1 and 2 ns pC V+ I+ PC VIN = 0 or V+ 2.7 0.01 3.3 1.0 3.3 V A W Document Number: 72218 S-70852-Rev. C, 30-Apr-07 www.vishay.com 3 DG4599 Vishay Siliconix SPECIFICATIONS (V+ = 2.5 V) Test Conditions Otherwise Unless Specified V+ = 2.5 V, 10 %, VIN = 0.4 or 2.0 Ve Limits - 40 to 85 C Tempa Minb Typc Maxb Unit Parameter Analog Switch Analog Signal Ranged Drain-Source On-Resistance rDS(on) Flatnessd Digital Control Input High Voltage Input Low Voltage Input Current Dynamic Characteristics Turn-On Time Turn-Off Time Break-Before-Make Time Power Supply Power Supply Range Power Supply Currentd Power Consumption Symbol VNO, VNC VCOM rDS(on) rDS(on) Flatness VINH VINL IINL or IINH Full V+ = 2.25 V, VD = 1.0 V, IS = 10 mA V+ = 2.5 V Room Fulld Room 0 26 29 10 V+ 110 120 V Full Full VIN = 0 or V+ Full Room Fulld Room Fulld Room 2 0.4 -1 16 7 1 2.25 12 2.75 0.01 1.0 2.75 1 50 60 35 45 V A tON tOFF td V+ I+ PC VIN = 0 or V+ VD or VS = 1.5 V, RL = 300 , CL = 35 pF Figures 1 and 2 ns V A W Notes: a. Room = 25 C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. f. Guaranteed by 5 V leakage testing, not production tested. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 4 Document Number: 72218 S-70852-Rev. C, 30-Apr-07 DG4599 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 30 rDS(on) - Drain-Source On-Resistance () rDS(on) - Drain-Source On-Resistance () 30 V+ = 2.5 V 25 25 V+ = 2.5 V 20 20 85 C V+ = 5 V 10 25 C - 40 C 85 C 15 V+ = 3 V 15 10 V+ = 5 V 5 5 - 40 C 25 C 0 0 1 2 3 4 5 VD - Analog Voltage (V) 0 0 1 2 3 4 5 VD - Analog Voltage (V) rDS(on) vs. Analog and Power Voltage 100 V+ = 5 V VIN = 0 V I+ - Supply Current (nA) 10 I+ - Supply Current (nA) 10 mA 1 mA 100 A 10 A 1 A 100 pA 10 pA 0.01 - 60 - 40 - 20 1 pA 0 20 40 60 80 100 120 140 1 rDS(on) vs. Analog Voltage and Temperature 1 0.1 10 100 1K 10 K 100 K 1M 10 M Temperature (C) Input SwitchingFrequency (Hz) Supply Current vs. Temperature 100 K V+ = 5 V VD, V S = 5 V 100 Supply Current vs. Input Switching Frequency V+ = 5 V 0 ID(off) Leakage Current (pA) - 100 ID(off) - 200 ID(on) - 300 - 400 - 500 - 600 0 25 50 75 100 125 150 0 1 2 3 4 5 6 IS(off) 10 K Leakage Current (pA) 1K ID(on) 100 10 1 - 50 - 25 Temperature (C) VD, V S - Analog Voltage (V) Leakage Current vs. Temperature Leakage vs. Analog Voltage Document Number: 72218 S-70852-Rev. C, 30-Apr-07 www.vishay.com 5 DG4599 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 25 tON tON, tOFF - Switching Time (nS) 20 25 C 85 C Off Isolation 80 100 15 OIRR, XTALK (dB) tOFF 25 C - 40 C 60 Crosstalk 10 40 85 C 5 - 40 C 20 V+ = 3 V RL = 50 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 10 K 100 K 1M Frequency (Hz) 10 M 100 M V+ - Supply Voltage (V) Switching Time vs. Temperature and Supply Voltage 3.0 0 Crosstalk and Off Isolation vs. Frequency 2.5 VT - Threshold Voltage (V) Insertion Loss (dB) -1 V+ = 3 V RL = 50 2.0 -2 1.5 -3 1.0 -4 0.5 -5 0.0 0 1 2 3 4 5 6 7 -6 1K 10 K 100 K 1M 10 M 100 M 1G V+ - Supply Voltage (V) Frequency (Hz) Input Switching Threshold vs. Supply Voltage 6 CL = 1 nF 4 V+ = 2.5 V Charge Injection (pC) 2 V+ = 3 V 0 Insertion Loss vs. Frequency -2 V+ = 5 V -4 -6 0 1 2 3 4 5 6 VD - Analog Voltage (V) Charge Injection vs. Analog Voltage www.vishay.com 6 Document Number: 72218 S-70852-Rev. C, 30-Apr-07 DG4599 Vishay Siliconix TEST CIRCUITS V+ Logic Input V+ Switch Input NO or NC IN Logic Input GND RL 300 CL 35 pF COM Switch Output VOUT +3V 50 % 0V tr < 20 ns tf < 20 ns 0.9 x V OUT Switch Output 0V tON tOFF CL (includes fixture and stray capacitance) VOUT = VCOM RL R L + R ON Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. Figure 1. Switching Time V+ Logic Input COM VO RL 300 CL 35 pF 3V 0V tr < 5 ns tf < 5 ns V+ VNO VNC NO NC IN GND VNC = VNO VO Switch Output 0V 90 % tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make Interval V+ Rgen + Vgen 3V V+ NC or NO IN GND COM VOUT VOUT CL = 1 nF IN On VOUT Off Q = VOUT x CL On IN depends on switch configuration: input polarity determined by sense of switch. Figure 3. Charge Injection Document Number: 72218 S-70852-Rev. C, 30-Apr-07 www.vishay.com 7 DG4599 Vishay Siliconix TEST CIRCUITS V+ 10 nF V+ COM IN COM NC or NO Off Isolation = 20 log GND V NC/ NO V COM 0 V, 2.4 V RL Analyzer Figure 4. Off-Isolation V+ 10 nF V+ COM Meter IN 0 V, 2.4 V NC or NO GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Figure 5. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?72218. www.vishay.com 8 Document Number: 72218 S-70852-Rev. C, 30-Apr-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DG4599DL-T1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |