 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| celpac S/TRI/SIT865570/F/28/06/2004 page 1 / 3 GB Three Phase Solid State Relays * Solid State Relay for resistive loads with integrated heatsink . * DIN rail or panel mounting * Back to back thyristors with TMS2 technology * 50A Thyristors size with I2t >1500A2s (*) * 10-30 VDC control voltage with input status LED * Overvoltage protection by integrated VDR * IP20 * Designed in conformity with UL, EN60950 and IEC60947-4-3 * No tool needed for mounting and dismounting or DIN rail or direct mouting on panel (*) : on request : model with I2t 5000A2s up to 20000A2s (SVT865570) 89,8 SIT865570 (SVT865570-WH) 24-520 VAC - 3 x 50A (AC-51 : 3 x 22 ARMS @40C) 59,4 Equivalent circuit : 1L1 A1 + Adaptateur / Adapter 2T1 122,2 sur le dessus du rail +4,3 0 +4,3 0 3L2 LED 87,4 126 98 Adaptateur / Adapter 4T2 5L3 O4,5 O5,4 12,7 A2 - Adaptateur / Adapter 6T3 Control characteristics (at 20C) Parameter Control voltage Courant de commande / Release voltage Input internal resistor fig.1 Reverse voltage Input-output characteristics (at 20C) Input-output isolation @500m Output-case isolation @500m Rated impulse voltage General characteristics Parameter Poids/Weight Storage temperature range Operating temperature range Conditions Symbol Uc Ic Uc off Rc Urv Ui Ui Uimp Min 10 10 DC Nom 24 32 4 560 30 4000 3300 4000 Max 30 42 Unit V mA V V VRMS VRMS V fig. 1 : Control characteristic 50 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Ic(mA) Uc(V) Input resistor means high input immunity (more than 1kV according IEC1000-4-4 and5 ) Symbol Typ. 1000 -40 / +100 -40 / +80 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SIT865570/F/28/06/2004 Output characteristics (at 20C) Parameter Load voltage Minimum Operating range Maximum Operating range Peak voltage (*) Clamping voltage Synchronizing level Latching voltage AC-51 no permanent nominal current AC-51 nominal current @25C Non repetitive overload current On state voltage drop Off state leakage current Minimum load current Turn on time Turn off time Operating frequency range Off state dv/dt Maximum di/dt non repetitive I2t (<10ms) Conducted immunity level in conformity with IEC 1000-4-4 (burst) Conducted immunity level in conformity with IEC 1000-4-5(schocks) Conformity thermal curves : curve 1 : with ventilation in the heatsink ( > 1m/s) curve 2 : working in normal conditions with a small ventilation in the cabinet curve 3 : according with IEC60947-4-2 in a closed cabinet without any ventilation. 50 45 40 35 30 I(A) page 2 / 3 GB Conditions Symbol Ue Uemin Uemax Up Uclamp Usync Ua Ie AC-51 Ie AC-51 Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t Value 400 24 520 (*) 1200 (*) 850 35 10 3x50 3x22 550 (typ 720) 1,4 1 5 10 10 10-400 500 50 1500 (typ 2600) 2kV criterion B 2kV criterion A Unit V rms V rms V rms V V V V A rms A rms A V mA mA ms ms Hz V/s A/s A2s ( 480Vrms + 10% ) by VDR Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-3 ; UL approved and designed in conformity with EN60950 25 20 15 10 5 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 Fig.3 : Overload current curves Surge current Itsm (A peak) = f(t) 600 Itsm (Apeak) 400 for models with Itsm =550A Tambient (C) No repetitive Itsm (Apeak)=f(t) without voltage reapplied 1 -No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 200 Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70C 0 0,01 0,1 t (s) 1 10 Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SIT865570/F/28/06/2004 page 3 / 3 GB SVT NUMBER OF WIRES 1 SOLID (No ferrule) FINE STRANDED (With ferrule) Wiring of the control circuit: SCREWDRIVER TYPE 2 SOLID (No ferrule) FINE STRANDED (With ferrule) MINIMUM TORQUE N.m 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,8 x 5,5 mm POZIDRIV 2 1,2 SVT 1 SOLID (No ferrule) FINE STRANDED (With ferrule) Wiring of the power circuit: NUMBER OF WIRES 2 SOLID (No ferrule) FINE STRANDED (With ferrule) SCREWDRIVER TYPE MINIMUM TORQUE N.m 1,5 ... 10 mm2 1,5 ... 6 mm2 1,5 ... 10 mm2 1,5 ... 6 mm2 0,8 x 5,5 mm POZIDRIV 2 1,8 R S T R S T R S T Dismounting Earth Mounting Resistive or inductive load M For motor use SIT865390 or SVT865990 /Typical application: celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SIT865570
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |