View AWT803-S_4307351.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Specification AWT803-S
SSC
Drawn Approval
CUSTOMER
Approval
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Contents
1. Description 2. Absolute Maximum Ratings
3. Electro-Optical Characteristics 4. Characteristic Graph 5. Reliability Test Item and Condition
6. Color & Binning 7. Outline Dimension 8. Packing 9. Soldering 10. Precaution for use 11. Handling of Silicone Resin LEDs
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Technical Data Sheet
AWT803-S
1. Description This surface-mount LED comes in PLCC standard package dimension. It has a substrate made up of a molded plastic reflector sitting on top of a bent lead frame. The die is attached within the reflector cavity and the cavity is encapsulated by epoxy or silicone. The package design coupled with careful selection of component materials allow these products to perform with high reliability in a larger temperature range -40 to 100. The high reliability feature is crucial to Automotive interior and Indoor ESS.
Features
* White colored SMT package * InGaN/Sic material * Suitable for all SMT assembly and soldering methods * Pb-Free Reflow soldering application * RoHS compliant
Applications
* White Back-light * Electric Signs and Signals * Interior automotive * Office Automation, Electrical Appliances, Industrial Equipment
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
2. Absolute maximum ratings*1
Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Symbol Value 111 30
*2
Unit mW mA mA V C C
Pd IF IFM
90 5 -40 ~ +100 -40 ~ +100
VR Topr Tstg
*1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW 1msec of pulse width and D 1/10 of duty ratio.
3. Electro-Optical characteristics
Parameter Forward Voltage Reverse Current Luminous Intensity*1 Viewing Angle *2 ESD ( HBM ) Symbol Condition Min 2.7 1,100 1 Typ 3.3 1,500 115 Max 3.7 10 2,100 Unit V A mcd deg. KV
VF IR IV
2
1/2
IF =20mA VR=5V IF =20mA IF =20mA
1.5k ; 100pF
*1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is 10% *2. 21/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity.
[Note] All measurements were made under the standardized environment of SSC.
Rev. 01 April 2008 www.ZLED.com
Relative Luminous Intensity [%]
Forward Current IF [mA]
Forward Current IF [mA]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
4. Characteristic Graph
Forward Current vs. Forward Voltage
(Ta=25 OC )
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 20 30 40
Relative Luminous Intensity vs Forward Current
(Ta=25 OC )
10
1
10
0
2.6
2.8
3.0
3.2
3.4
3.6
3.8
4.0
4.2
Forward Voltage VF (V)
Forward Current IF [mA]
Forward Current Derating Curve
40
Radiation Diagram
0 -30
30
30
20
-60
60
10
-90
0 -40 -20 0 20 40 60
O
90
80
100
120
Ambient Temperature TA [ C]
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
5 Reliability
Number of Damage 0/22 0/22 0/22
Item
Reference Internal Reference EIAJ ED-4701 EIAJ ED-4701
Test Condition
Duration / Cycle 100 Cycle 100 Cycle 1000 Hours 1000 Hours 1000 Hours 1000 Hours 1000 Hours 1000 Hours 1000 Hours 3 Time
Thermal Shock Temperature Cycle High Temperature Storage High Temperature High Humidity Storage Low Temperature Storage Operating Endurance Test High Temperature High Humidity Life Test High Temperature Life Test Low Temperature Life Test ESD(HBM)
Ta =-40oC (30MIN) ~ 100oC (30MIN) Ta =-40oC (30MIN) ~ 25oC (5MIN) ~ 100oC (30MIN) ~ 25oC (5MIN) Ta =100oC Ta =85oC, RH=85% Ta =-40oC Ta =25oC, IF =30mA Ta =85oC, RH=85%, IF =15mA Ta =100oC, IF =5mA Ta =-40oC, IF =30mA 1KV at 1.5k; 100pF
EIAJ ED-4701
0/22
EIAJ ED-4701 Internal Reference Internal Reference Internal Reference Internal Reference MIL-STD883D
0/22 0/22
0/22
0/22 0/22 0/22
Criteria for Judging the Damage Criteria for Judgement MIN MAX USL*1 x 1.2 USL*1 x 2.0 -
Item Forward Voltage Reverse Current Luminous Intensity
Symbol
Condition
VF IR IV
IF =20mA VR=5V IF =20mA
LSL*2 x 0.5
Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level
Rev. 01 April 2008 www.ZLED.com
CIE (y)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
6. Color & Binning
0.9 0.8 0.7
505 515 510 520 525 530 535
540
545
550 555 560 565 570 575 580 585 590 595 600 610 620 630 830
0.6
500
0.5 0.4 0.3 0.2 0.1 0.0 0.0
495
490 485 480 475 470 460
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
CI E(x)
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
0.46
2700K 3000K
0.44
W1 W0
0.42
4000K
3500K
V1 V0 VA
T1 Y
0.40
4500K
S1 R1 R0 RA RB S0 SA SB
3700K
T0 TA TB
3200K
WA WB
2500K
0.38
VB
2900K
0.36
0.34
4200K
4700K
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
COLOR RANK
RB X 0.3515 0.3500 0.3649 0.3676 SB X 0.3676 0.3649 0.3866 0.3910 TB X 0.3898 0.3860 0.4106 0.4158 VB X 0.4158 0.4106 0.4307 0.4381 WB X 0.4381 0.4307 0.4588 0.4670 Y 0.3910 0.3768 0.3838 0.3979 X 0.4457 0.4381 0.4670 0.4780 Y 0.3841 0.3720 0.3768 0.3910 X 0.4225 0.4158 0.4381 0.4457 WA Y 0.4058 0.3910 0.3979 0.4150 Y 0.3716 0.3600 0.372 0.3841 X 0.3940 0.3898 0.4158 0.4225 VA Y 0.3991 0.3841 0.3910 0.4058 Y 0.3600 0.3482 0.3618 0.3750 X 0.3704 0.3676 0.3910 0.3952 TA Y 0.3843 0.3716 0.3841 0.3991 Y 0.3487 0.3400 0.3482 0.3600 X 0.3531 0.3515 0.3676 0.3704 SA Y 0.3725 0.3600 0.3750 0.3881 RA Y 0.3605 0.3487 0.3600 0.3725
X
4500K R0 X 0.3546 0.3531 0.3704 0.3733 4000K S0 X 0.3733 0.3704 0.3952 0.3997 3500K T0 X 0.3985 0.3940 0.4225 0.4283 3000K V0 X 0.4283 0.4225 0.4457 0.4541 2700K W0 X 0.4541 0.4457 0.4780 0.4867

R1 Y 0.3717 0.3605 0.3725 0.3855 X 0.3562 0.3546 0.3733 0.3760 S1 Y 0.3855 0.3725 0.3881 0.4020 X 0.376 0.3733 0.3997 0.4044 T1 Y 0.3983 0.3843 0.3991 0.4127 X 0.4037 0.3985 0.4283 0.4356 V1 Y 0.4127 0.3991 0.4058 0.4220 X 0.4356 0.4283 0.4541 0.4617 W1 Y 0.422 0.4058 0.4150 0.4300 X 0.4617 0.4541 0.4867 0.4970 Y 0.4371 0.4220 0.4300 0.4466 Y 0.4294 0.4127 0.422 0.4371 Y 0.4140 0.3983 0.4127 0.4294 Y 0.3974 0.3855 0.4020 0.4160 Y 0.3826 0.3717 0.3855 0.3974
Rev. 01
* Measurement Uncertainty of the Color Coordinates : 0.01
April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Bin Code J2 J5 J8 Bin Code J1 J3 J6
Bin Code Description Bin Code Luminous Intensity J3 CIE w0 Forward Voltage Z3
4,700K ~ 3,200K 4,700K Luminous Intensity (mcd) @ IF = 20mA Min. 1,200 1,500 1,800 Max. 1,500 1,800 2,100 Color Rank @ IF = 20mA RX SX TX
* X : B, A, 0, 1
Forward Voltage (V) @ IF = 20mA Bin Code Y Z1 Z2 Z3 A1 Min. 2.7 3.0 3.1 3.2 3.3 Max. 3.0 3.1 3.2 3.3 3.4
3,200K ~ 2,500K 3,200K Luminous Intensity (mcd) @ IF = 20mA Min. 1,100 1,300 1,600 Max. 1,300 1,600 1,900 Color Rank @ IF = 20mA VX WX
* X : B, A, 0, 1
Forward Voltage (V) @ IF = 20mA Bin Code Y Z1 Z2 Z3 A1 Min. 2.7 3.0 3.1 3.2 3.3 Max. 3.0 3.1 3.2 3.3 3.4
[Note] All measurements were made under the standardized environment of SSC. In order to ensure availability, single color rank will not be orderable.
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
7. Outline Dimension
Recommended Solder Pattern
( Tolerance: 0.2, Unit: mm )
8. packing
( Tolerance: 0.2, Unit: mm )
(1) Quantity : 3000pcs/Reel, 2000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10 to the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Reel Packing Structure
Reel
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
HUMIDITY INDICATOR DESI PAK
Aluminum Vinyl Bag
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
Outer Box Structure
Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 102 or 142
1 SIDE c
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD. RoHS
1
b
a
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
9. soldering
(1) Lead Solder
Lead Solder
Lead Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 120~150 120 sec. Max. 240 Max. 10 sec. Max.
2.5~5 C / sec.
2.5~5 o C / sec. Pre-heating 120~150 oC
240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC
120sec. Max.
(2) Lead-Free Solder
Lead-frame Solder
Lead Free Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 150~200 120 sec. Max. 260 Max. 10 sec. Max.
1~5 o C / sec.
1~5 o C / sec. Pre-heating 150~200 o C
260 oC Max. 10 sec. Max. 60sec. Max. Above 220 oC
120sec. Max.
(3) Hand Soldering conditions Do not exceed 4 seconds at maximum 315C under soldering iron.
(4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used.
Note : In case that the soldered products are reused in soldering process, we don't guarantee the products.
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
10. precaution for use
(1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desicator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5C ~30C Humidity : maximum 70%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; Keeping of a fraction Temperature : 5 ~ 40C Humidity : less than 10% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 605C. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) The LEDs must be soldered within seven days after opening the moisture-proof packing. (11) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (12) The appearance and specifications of the product may be modified for improvement without notice.
Rev. 01 April 2008 www.ZLED.com
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
11. Handling of Silicone Resin LEDs
(1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound.
(2) In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.
(3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED's reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the LED. Rev. 01 April 2008 www.ZLED.com

▲Up To Search▲

Price & Availability of AWT803-S

	To Download AWT803-S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .