View STTH1512_4188356.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STTH1512
Ultrafast recovery - 1200 V diode
Main product characteristics
A K
IF(AV) VRRM Tj VF (typ) trr (typ)
15 A 1200 V 175 C 1.20 V 53 ns
K
A K
DOP3I STTH1512PI
A K
DO247 STTH1512W
Features and benefits

Ultrafast, soft recovery Very low conduction and switching losses High frequency and/or high pulsed current operation High reverse voltage capability High junction temperature Insulated packages: DOP3I Electrical insulation = 2500 VRMS Capacitance = 12 pF
K A K
TO-220AC STTH1512D
A A
D2PAK STTH1512G
Order codes Description
Part Number Marking STTH1512D STTH1512G STTH1512G STTH1512W STTH1512PI
The high quality design of this diode has produced a device with low leakage current, regularly reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability. Such demanding applications include industrial power supplies, motor control, and similar mission-critical systems that require rectification and freewheeling. These diodes also fit into auxiliary functions such as snubber, bootstrap, and demagnetization applications. The improved performance in low leakage current, and therefore thermal runaway guard band, is an immediate competitive advantage for this device.
STTH1512D STTH1512G STTH1512G-TR STTH1512W STTH1512PI
March 2006
Rev 1
www.st.com
1/11
11
Characteristics
STTH1512
1
Table 1.
Symbol VRRM IF(RMS) IF(AV) IFRM IFSM Tstg Tj
Characteristics
Absolute ratings (limiting values at 25 C, unless otherwise specified)
Parameter Repetitive peak reverse voltage RMS forward current Average forward current, = 0.5 Repetitive peak forward current Surge non repetitive forward current Storage temperature range Maximum operating junction temperature TO-220AC / DO247 / DOP3I / D PAK TO-220AC / DOP3I tp = 5 s, F = 5 kHz square tp = 10 ms Sinusoidal D2 PAK / DO247 Tc = 130 C Tc = 105 C 200 150 -65 to + 175 175 A A C C
2
Value 1200 50 15
Unit V A A
Table 2.
Symbol Rth(j-c)
Thermal parameters
Parameter TO-220AC / D2PAK / DO247 Junction to case DOP3I 2 C/W Value 1.3 Unit C/W
Table 3.
Symbol IR(1)
Static electrical characteristics
Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Tj = 25 C VR = VRRM Min. Typ Max. 15 A 10 100 2.10 IF = 15 A 1.25 1.20 1.90 1.80 V Unit
VF(2)
Forward voltage drop
Tj = 125 C Tj = 150 C
1. Pulse test: tp = 5 ms, < 2 % 2. Pulse test: tp = 380 s, < 2 %
To evaluate the conduction losses use the following equation: P = 1.4 x IF(AV) + 0.027 IF2(RMS)
2/11
STTH1512 Table 4.
Symbol
Characteristics Dynamic characteristics
Parameter Test conditions IF = 1 A, dIF/dt = -50 A/s, VR = 30 V, Tj = 25 C IF = 1 A, dIF/dt = -100 A/s, VR = 30 V, Tj = 25 C 53 20 1.5 600 5.5 ns V Min. Typ Max. 105 ns 75 28 A Unit
trr
Reverse recovery time
IRM S tfr VFP
Reverse recovery current Softness factor Forward recovery time Forward recovery voltage
IF = 15 A, dIF/dt = -200 A/s, VR = 600 V, Tj = 125 C IF = 15 A, dIF/dt = -200 A/s, VR = 600 V, Tj = 125 C dIF/dt = 50 A/s IF = 15 A VFR = 1.5 x VFmax, Tj = 25 C IF = 15 A, dIF/dt = 50 A/s, Tj = 25 C
Figure 1.
P(W)
35 30 25 20 15 10 5
Conduction losses versus average current
= 0.1 = 0.05 =1 = 0.2 = 0.5
Figure 2.
IFM(A)
150 140 130 120 110 100 90 80 70 60 50 40 30 20
Forward voltage drop versus forward current
Tj=150C (typical values)
Tj=150C (maximum values)
Tj=25C (maximum values)
T
IF(AV)(A)
0 0 2 4 6 8 10 12
=tp/T
14 16
tp
18
10 0 0.0 0.5 1.0 1.5 2.0
VFM(V)
2.5 3.0 3.5 4.0
3/11
Characteristics
STTH1512
Figure 3.
Relative variation of thermal impedance junction to case versus pulse duration
Figure 4.
Peak reverse recovery current versus dIF/dt (typical values)
Zth(j-c)/Rth(j-c)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02 1.E-01 1.E+00
Single pulse
IRM(A)
50 45 40 35 30 25 20 15 10
IF=0.5 x IF(AV) IF=IF(AV) IF=2 x IF(AV) VR=600V Tj=125C
tp(s)
5 0 0 50 100 150
dIF/dt(A/s)
200 250 300 350 400 450 500
Figure 5.
trr(ns)
600 550 500 450 400 350 300 250 200 150 100 0 50
Reverse recovery time versus dIF/dt (typical values)
VR=600V Tj=125C
Figure 6.
Qrr(C)
5.5 5.0 4.5
VR=600V Tj=125C
Reverse recovery charges versus dIF/dt (typical values)
IF=2 x IF(AV)
IF=2 x IF(AV)
4.0 3.5
IF=0.5 x IF(AV)
IF=IF(AV)
3.0 2.5 2.0 1.5 1.0 0.5
IF=IF(AV)
IF=0.5 x IF(AV)
dIF/dt(A/s)
100 150 200 250 300 350 400 450 500
dIF/dt(A/s)
0 50 100 150 200 250 300 350 400 450 500
0.0
Figure 7.
Softness factor versus dIF/dt (typical values)
Figure 8.
Relative variations of dynamic parameters versus junction temperature
IF=IF(AV) VR=600V Reference: Tj=125C
S factor
S factor
3.0
IF 2xIF(AV) VR=600V Tj=125C
2.25 2.00 1.75 1.50
2.5
2.0
1.25 1.00
1.5
trr
0.75 0.50
IRM
1.0
0.25
QRR
0.5 0 50 100 150
dIF/dt(A/s)
200 250 300 350 400 450 500
Tj(C)
0.00 25 50 75 100 125
4/11
STTH1512
Characteristics
Figure 9.
VFP(V)
40 35 30 25 20 15 10 5
IF=IF(AV) Tj=125C
Transient peak forward voltage versus dIF/dt (typical values)
Figure 10. Forward recovery time versus dIF/dt (typical values)
tfr(ns)
800 700 600 500 400 300 200 100
IF=IF(AV) VFR=1.5 x VF max. Tj=125C
dIF/dt(A/s)
0 0 100 200 300 400 500 0 0 100
dIF/dt(A/s)
200 300 400 500
Figure 11. Junction capacitance versus reverse voltage applied (typical values)
C(pF)
1000
F=1MHz VOSC=30mVRMS Tj=25C
Figure 12. Thermal resistance junction to ambient versus copper surface under each lead (Epoxy printed circuit board FR4, ecu = 35 m)
Rth(j-a)(C/W)
80 70 60 50
100
40 30 20 10
VR(V)
10 1 10 100 1000
SCU(cm)
0 0 5 10 15 20 25 30 35 40
5/11
Package information
STTH1512
2
Package information
Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 Nm (TO-220AC) Recommended torque value: 0.80 Nm (DOP3I) Maximum torque value: 0.7 Nm (TO-220AC) Maximum torque value: 1.0 Nm (DOP3I) Table 5. T0-220AC dimensions
DIMENSIONS REF. Millimeters Min.
H2 OI L5 L7 L6 L2 C A
Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409
Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40
A C D E F F1
4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00
F1
L9 L4 F
D
G H2 L2 L4
16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93
0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154
M E G
L5 L6 L7 L9 M Diam. I
2.6 typ. 3.75 3.85
0.102 typ. 0.147 0.151
6/11
STTH1512 Table 6. DO-247 dimensions
Package information
DIMENSIONS REF. Millimeters Min. A D
V
Inches Min. 0.191 0.086 0.015 0.039 0.078 Max. 0.203 0.102 0.031 0.055
Max 5.15 2.60 0.80 1.40 2.00
4.85 2.20 0.40 1.00
E
Dia
V
F F2
H
A
F3 G
2.00 10.90 15.45 19.85 3.70 18.50 14.20 34.60 5.50 2.00 5 60 3.55
2.40
0.078 0.429
0.094
L5 L L2 L4 F2 L3 F3 V2 F G M E L1 D
H L L1 L2 L3 L4 L5 M V V2 Dia.
15.75 0.608 20.15 0.781 4.30 0.145 0.728 14.80 0.559 1.362 0.216 3.00 0.078 5 60 3.65 0.139
0.620 0.793 0.169
0.582
0.118
0.143
7/11
Package information Table 7. D2PAK dimensions
DIMENSIONS REF. Millimeters Min. A A1
A E L2
STTH1512
Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126
Max 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20
4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40
A2
C2
B
D
B2 C
L L3 A1 B2 B G A2 R
C2
C
D E G L
M
*
V2
L2 L3 M R V2
* FLAT ZONE NO LESS THAN 2mm
0.40 typ. 0 8
0.016 typ. 0 8
Figure 13. D2PAK footprint (dimensions in mm)
16.90
10.30 1.30
5.08
8.90
3.70
8/11
STTH1512 Table 8. DOP3I dimensions
Package information
DIMENSIONS REF.
E R E1 OP c A
Millimeters Min. Max. 4.60 1.40 1.55 0.70 13.10 15.50 7.75 11.30 21.10 15.60 4.17 2.90
Inches Min. 0.173 0.047 0.057 0.020 0.474 0.594 0.297 0.425 0.815 0.565 0.161 0.106 Max. 0.181 0.055 0.061 0.028 0.516 0.610 0.305 0.445 0.831 0.614 0.164 0.114
A b c
4.40 1.20 1.45 0.50 12.15 15.10 7.55 10.80 20.4 14.35 4.08 2.70
G D
Y
c1 D E E1
L
e G
b Q e
c1
L P Q R Y
4.60 typ. 15.80 16.50
0.181 typ. 0.622 0.650
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
9/11
Ordering information
STTH1512
3
Ordering information
Part Number STTH1512D STTH1512PI STTH1512W STTH1512G STTH1512G-TR Marking STTH1512D STTH1512PI STTH1512W STTH1512G STTH1512G Package TO-220AC DOP3I DO-247 D2
2
Weight 1.86g 4.46 g 4.4 g 1.48 g 1.48 g
Base qty 50 30 30 50 1000
Delivery mode Tube Tube Tube Tube Tape and reel
PAK
D PAK
4
Revision history
Date 02-Mar-2006 Revision 1 First issue. Description of Changes
10/11
STTH1512
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11

▲Up To Search▲

Price & Availability of STTH1512

	To Download STTH1512 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .