View PMP1348_4182159.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PMP 13.48 Rectifier Data Sheet
Description
The PMP 13.48 is a convection-cooled rectifier delivering superior reliability in harsh environmental conditions where fan-cooled products may not deliver the reliability required to ensure maximum network asset performance. With leading-edge patented resonant conversion topology, the PMP13 industry-leading efficiencies of 93.5% deliver significant operating expenditure savings in the network on utility and HVAC costs. Power-One also recognizes that typical network loads operate between 20-60%; hence the PMP13 unique "flat" efficiency ensures minimal energy loss down to 15% of installed capacity The PMP 13 is optimized for telecom applications, and is designed to work in PPS10 systems incorporating the PCS controller and various distribution options with up to 6 units per 19"/6U shelf and up to 8 units per 23"/6U shelf.
Features
* * * * * * * PPS 10 3900 System Shown * * * * RoHS lead free solder and lead solder exempted products are available 208/240 VAC input 48 VDC output Input overvoltage disconnection Thermal protection Active load sharing Hot swappable Up to 92% efficient International standards compliance Natural convection cooling Low weight
NOV 07, 2006
Page 1 of 2
www.power-one.com
PMP 13.48 Rectifier Data Sheet
Input
Model Input Voltage PMP 13.48 205-250 VAC 10% single phase, (44-66 Hz) (185-160 V at reduced output power) <6.8 A <12 A peak max. 100 ms EN 61000-3-2 Power Factor >0.99 at max. load EN 61000-4-5 T 10A IEC-320/C14 EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B 13.48 44 - 56 VDC 1300 W at 50-56 VDC 28 A >92%
Mechanical
Dimensions (WxHxD) Weight Cooling Insulation 62 x 261 x 231 mm (2.4 x 10.3 x 9.1 in) 3.1 kg (6.8 lb) Natural Convection Reinforced insulation, tested at: 4.25 kVDC primary-secondary 2.12 kVDC primary-ground 0.75 kVDC secondary-ground IP20 Up to 8 modules per shelf EN 60950 UL 1950 and IEC60950 , Class 1 CSA C22-2 No. 950 Short-circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Thermal protection reduces the output power at environmental temperatures above maximum level. Shut down at >75 C with an automatic restart.* Input overvoltage disconnection at >275 VAC with automatic reset at >260 VAC. Green LED Power ON Red LED High output voltage/ shutdown Low voltage/ module failure
Current (max.) Soft Start Harmonics Surge Immunity Fuse Connection EMC
Enclosure Mounting Safety
Other Technical Data
Protection
Output
Model Output Voltage Power (max.) Current (max.) Efficiency (at 40-90% load)* Tolerance Transient Response Load Sharing Ripple Psophometric Connection EMC Vout 1.0% 5% at load variation 10-90% or 90-10%, recovery time 10 ms <5% of nominal current <100 mV p-p (BW. 30 MHz) <2 mV, according to CCITT norms DIN 41612F EN 61000-6-2, EN 61000-6-4 Audible Noise Operating Temperature Storage Temperature Radiated EMC Environment
Indications
Red LED <35 dBA
-25 to +55 C up to 2000 m -25 to +45 C above 2000 m -40 to +85 C EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Storage: Transport: Operation: ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.
*Average performance for a single module.
NOV 07, 2006
Page 2 of 2
www.power-one.com

▲Up To Search▲

Price & Availability of PMP1348

	To Download PMP1348 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .