 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz-4 GHz Features * * * * * Low Cost/High Volume Broadband Performance 50 MHz - 4 GHz Low Insertion Loss/ High Isolation Low Distortion Available in Tape & Reel M/A-COM Products Final Release - Rev. 2.01 Product Image Description Using M/A-COM's HMIC monolithic technology, M/ACOM has developed a family of broadband PIN diode MMIC switches packaged in popular, industry standard surface mount packages. The MA4SW101-287T is an SPST SOT- 23 packaged switch utilizing two PIN diodes in a seriesshunt configuration. These switches offer broadband (50 MHz-4 GHz) performance, fast switching speed and low distortion. The switches have been designed for low cost, high volume applications. These switches are available for tape and reel insertion. Schematic and Bias Connections Ordering Information Part Number MA4SW101-287T Package Plastic SOT-23 Typical Performance: Z0 = 50, I bias= +/- 20mA Typical Parameter Units 25C Frequency Insertion Loss Isolation Return Loss MHz dB dB dB 2000 0.30 36 21 - 20 mA +20 mA Loss State Isolation Truth Table Control Level (DC Current) at J2 Condition of Switch RF in to RF out Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Applied DC Voltage Power Dissipation @+25C Incident Power @+25C Absolute Maximum -65C to +85C -65C to +125C 50V 50 mW max 100 mW max TOP View 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz-4 GHz M/A-COM Products Final Release - Rev. 2.01 Electrical Specifications at +25C MA4SW101-287T Parameter1 Frequency 50MHz 1 GHz Min. 60 40 30 25 20 17 50 - Typ. 0.3 0.3 0.3 0.4 0.5 70 46 36 30 26 28 23 21 18 15 75 Max 0.4 0.5 0.5 - Units dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Volts dBc Insertion Loss 2 GHz 3 GHz 4 GHz 50MHz 1 GHz Isolation 2 GHz 3 GHz 4 GHz 50MHz 1 GHz Input Return Loss 2 GHz 3 GHz 4 GHz Voltage Rating2 Second Harmonic Distortion @ 0dBm Third Harmonic Distortion @ 0dBm Switching Speed Signal Compression @ 100mW 1 GHz 1 GHz - 90 50 0.1 - dBc nsec dB 1 GHz - Notes: 1. Parameters (except for voltage rating) are specified with +/-20mA at all output ports in 50 microstrip test fixture. 2. Reverse current will not exceed 10 A at the rated voltage. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz-4 GHz Typical Performance Curves at +25C M/A-COM Products Final Release - Rev. 2.01 Case Styles SOT-23 Case Style 287 SOT-23 (Case Style 287) INCHES MAX. 0.048 0.008 0.040 0.020 0.006 0.119 0.056 DIM. F D A N MIN. 0.013 0.003 0.110 0.047 MILLIMETERS MIN. MAX. 0.35 0.08 2.80 1.20 0.95 typical 1.90 typical 2.60 0.60 1.22 0.20 1.00 0.50 0.15 3.00 1.40 A B C D E M G B K F G H J K 0.037 typical 0.075 typical 10 max.1 2 . . .30 0.103 0.024 L H J C E L DIM. M N GRADIENT Note: 1. Applicable on all sides 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz-4 GHz Mounting Information The illustration indicates the recommended mounting pad configuration for the SOT-23, package. Solder paste containing flux should be screened onto the pads to a thickness of 0.005- 0.007 inches. The plastic package is placed in position, firmly adhering to the solder paste. Permanent attachment is performed by a reflow soldering procedure during which the tab temperature does not exceed +275 C and the body temperature does not exceed +250 C. Please refer to Application Note M538 for surface mounting instructions. M/A-COM Products Final Release - Rev. 2.01 SOT-23 .030 min. 0.80 .035 min. 0.90 .037 0.95 0.75 1.9 .090 2.2 Dimenstions: inches mm 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. |
Price & Availability of MA4SW101-287T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |