 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TP2424 Low Threshold P-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS -240V * Same as SOT-89. RDS(ON) (max) 8.0 VGS(th) (max) -2.4V ID(ON) (min) -800mA Order Number / Package TO-243AA* TP2424N8 Die TP2424ND Product supplied on 2000 piece carrier tape reels. Product marking for TO-243AA: TP4C Features Low threshold High input impedance Low input capacitance Fast switching speeds Free from secondary breakdown Low input and output leakage Complementary N- and P-channel devices where = 2-week alpha date code Low Threshold DMOS Technology These low threshold enhancement-mode (normally-off) power transistors utilize a vertical DMOS structure and Supertex's wellproven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally induced secondary breakdown. Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications Logic level interfaces - ideal for TTL and CMOS Solid state relays Linear Amplifiers Power Management Analog switches Telecom switches Package Option Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. BVDSS BVDGS 20V -55C to +150C 300C D G D S TO-243AA (SOT-89) Note: See Package Outline section for dimensions. 11/12/01 Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. 1 TP2424 Thermal Characteristics Package ID (continuous)* -316mA ID (pulsed) -1.9A Power Dissipation @ TA = 25C TO-243AA jc ja IDR* -316mA IDRM -1.9A C/W 15 C/W 78 1.6W * ID (continuous) is limited by max rated Tj. Mounted on FR5 board, 25mm x 25mm x 1.57mm. Significant PD increase possible on ceramic substrate. Electrical Characteristics (@ 25C unless otherwise specified) Symbol BVDSS VGS(th) VGS(th) IGSS IDSS Parameter Drain-to-Source Breakdown Voltage Gate Threshold Voltage Change in VGS(th) with Temperature Gate Body Leakage Zero Gate Voltage Drain Current Min -240 -1.0 -2.4 4.5 -100 -10.0 -1.0 ID(ON) RDS(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr Notes: 1.All D.C. parameters 100% tested at 25C unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2.All A.C. parameters sample tested. Typ Max Unit V V mV/C nA A mA A Conditions VGS = 0V, ID = -250A VGS = VDS, ID= -1.0mA VGS = VDS, ID= -1.0mA VGS = 20V, VDS = 0V VGS = 0V, VDS = Max Rating VGS = 0V, VDS = 0.8 Max Rating TA = 125C VGS = -4.5V, VDS = -25V VGS = -10V, VDS = -25V VGS = -4.5V, ID = -150mA VGS = -10V, ID = -500mA VGS = -10V, ID = -500mA VDS = -25V, ID = -200mA VGS = 0V, VDS = -25V f = 1.0 MHz ON-State Drain Current -0.3 -0.8 Static Drain-to-Source ON-State Resistance Change in RDS(ON) with Temperature Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop Reverse Recovery Time 300 150 10.0 8.0 0.75 %/C m 200 100 40 20 30 35 25 -1.5 V ns ns pF Switching Waveforms and Test Circuit 0V 10% INPUT -10V PULSE GENERATOR 90% t(ON) Rgen t(OFF) tr td(OFF) tF INPUT td(ON) 0V 90% OUTPUT VDD 90% 10% 10% (c)2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 2 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 * FAX: (408) 222-4895 www.supertex.com VDD = -25V, ID = -250mA, RGEN = 25 VGS = 0V, ISD = -500mA VGS = 0V, ISD = -500mA D.U.T. OUTPUT RL VDD 11/12/01 |
Price & Availability of TP2424ND
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |