|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PGE 608 16 EDFA Gain Block for DWDM Applications Key Features * Operating wavelength window: 1543-1558 nm * Gain flatness < 0.5dB * Low noise figure, typ. <5 dB * +11 dBm output power * Input and output monitor diodes * Optical output monitor * Operating temperature range: -5 C to 70 C * Multisourced footprint * Small size (120x80x15) mm Applications * Pre-amplifier in single-channel or DWDM networks Description The DWDM gain block is intended to be used as a pre-amplifier in WDM / DWDM networks. The gain block has input and output power monitoring. The input and output ports have isolators to attenuate spurious reflections in the system. External electronic circutry is needed for biasing the pump laser and for controlling the pump laser temperature. Heat sink is provided via the bottom surface. 1 PGE 608 16 Optical input signal Input power monitor Optical gain Output power monitor Optical output signal 28 pin electrical interface Optical output power monitor Figure 1. Block diagram Base View 39 Extra 8 1 14 7 47.5 39 Output R26 (x4) 22 15 28 21 4 x M3 (5.6 deep) Pin type: Molex Milli-Grid (87089-1416) or equivalent. 2.00 mm Pitch 2 x 7 Pins 2.0 0.50 x 0.50 square (2 x 7) Monitor output Input 10 50 23.75 100 Note: 1. Dimensions in mm 2. Tolerance 0.15 mm Side View 3.5 15 Top View 120 Output Extra Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16-17 18 19-21 22 23-24 25 26-28 Function Thermistor, Pump (GND) Laser Anode, Pump TEC Neg., Pump GND Pump Monitor Anode, Pump NC Input Monitor Cathode Thermistor, Pump Laser Cathode, Pump TEC Pos., Pump GND Pump Monitor Cathode, Pump NC Input Monitor Anode Output Monitor Anode NC GND NC Output Monitor Cathode NC GND NC 25 28 14 80 2.0 40 80 Input Monitor output Figure 2. Mechanical Outline Drawing and Pin Connection 2 PGE 608 16 Optical Characteristics Electrical and optical characteristics over recommended operating conditions, unless otherwise noted. Parameter Conditions Symbol Operating Wavelength Measurement Wavelength Input Power Output Power Output Power Input/Output Return Loss Noise Figure Gain Flatness @ PIL= -12.5 dBm and @ L @ PIL= -18.5 dBm and @ L With EDFA not activated @ L Over PIL and L Over L for G(M) =15.5 dB L M PIL Po1 Po2 IRL/ORL NF GFLAT Min Typ Max Unit 1543 1550 1558 -6.5 11 7.5 40 -0.4 5.5 0.4 nm nm dBm dBm dBm dB dB dB Electrical Characteristics Parameter Conditions Symbol Min Typ Max Unit Operating Current Operating Voltage Power Dissipation Thermistor Resistance TEC Current TEC Voltage @ 25 C @ T = 50 K @ T = 50 K IDRIVE VF PE RTH ITEC VTEC 9.5 10.0 270 2.4 3.5 10.5 1.1 2.6 mA V W k A V Recommended Operating Conditions Parameter Symbol Min Typ Max Operating Case Temperature TCase -5 70 C Unit Absolute Maximum Ratings Parameter Symbol Min Max Storage Temperature Drive Current Tstg ILD_MAX -40 75 300 C mA Unit CAUTION: Stresses outside those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 3 PGE 608 16 Handling Precautions This device may be damaged as a result of electrostatic discharge (ESD). Take proper precautions during both handling and testing. This typically includes grounded wrist wraps, workbenches and floor mats in ESD controlled areas. Semiconductor devices may be damaged by current surges, use appropriate transient protection. Quality Assurance Ericsson Microelectronics commitment to quality has been proven through a decade of semiconductor device production and has been confirmed to ISO 9001. Opto product qualification is made according to the intention of applicable Telcordia standards. Connector Options FC/PC SC (Other connectors available on request) DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM WAVELENGTH 1300 nm - 1600 nm CLASS 3B LASER Information given in this data sheet is believed to be accurate and reliable. However no responsibility is assumed for the consequences of its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Ericsson Microelectronics. These products are sold only according to Ericsson Microelectronics' general conditions of sale, unless otherwise confirmed in writing. Product specifications subject to change without notice. Ericsson Microelectronics AB SE-164 81 Kista, Sweden Telephone: +46 8 757 50 00 www.ericsson.com/microelectronics For local sales contacts, please refer to our website or call: Int + 46 8 757 47 00, Fax: +46 8 757 47 76 1522-PGE 608 16 Rev. C (c) Ericsson Microelectronics AB, February 2000 4 |
Price & Availability of PGE60816 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |