View LM2-TYL1-F1-N1_1265305.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) SMD LED
Model # LM2-TYL-F-N Data Sheet
60-degree, 3.2 x 2.7 mm, power SMD LED in amber color with water-transparent lens
Applications
* * * * * * Traffic Lights Backlighting (such as LCDs, switches, keys, displays, illuminated advertising) Interior and Exterior Automotive Lighting (such as dashboards, backup and brake lights) Substitution for Micro Incandescent Lamps Marker Lights (such as steps and exits) Signal and Symbol Luminaires
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient
Note 2 Note 1
Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS
Absolute Maximum Rating 70 200 5 225 -40 ~ +100 -40 ~ +100 110 300 150
Unit mA mA V mW C C C C/W C/W
Junction/Solder Point
1. 2.
Notes:
Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on PCB FR4 (pad size 16 mm2)
Typical Electrical & Optical Characteristics (TA = 25C )
Characteristics Symbol VF IR V IV D 21/2 Condition IF = 50 mA VR = 5 V IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA Unit V A mlm mcd nm deg 1120 584 2500 1800 591 60 596 Minimum Typical 2.6 Maximum 3.2 10
D-CT187.000 Data Sheet: CL
Forward Voltage Reverse Current Luminous Flux Luminous Intensity Dominant Wavelength 50% Power Angle
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LM2-TYL-F-N (IF = 50 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LM2-TYL1-F1-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 50 mA.
2800 mcd Luminous Intensity (IV)
Y1 or above X2
2240 mcd X1 1800 mcd W2 1400 mcd W1 1120 mcd 584 nm Dominant Wavelength (D) 596 nm
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT87.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Document No. SPE/LM2-TYL1-F1-N1 Rev. No. 03
Graphs
100.0 80.0 60.0 40.0 20.0 0.0 2.0 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. If (mA) Vr(V) -60 -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 -50.0
2.5 2.0 1.5 1.0 0.5 0.0 If(mA) 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 100% 75% 50% 25%
Half Power WL=20nm Domi WL= 591nm
0% 400
500
600
700
WL(nm) 800
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
100 80 60 40 20 0
IF(mA) Rth j-s=150 C/W
50 60
50% Power Angle :
40 30 20 10 0 1.0 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0 20 40 60 80 100 110
Rth j-a=300 C/W T ( C) 0 20 40 60 80 100
70 80 90 100
FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C
FIG.6 FAR FIELD PATTERN.
Items Prepared by Checked by Approved by FCN#
Signatures
WangFJ XieJH DavidLiu
Date
2007-03-16 2007-03-16 2007-03-16 Rev.No 02 03 Date
Revision History
Change Description
2005-08-09 Release. 2007-03-16 Cancel cover page Description:60 Degree
FCN20070080
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
Copyright@2002 Cotco International Ltd. CLD-CT87.000
4/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LM2-TYL1-F1-N1 Rev. No. 03
Mechanical Dimensions Dimension Drawing
Switches,Keys,Displays,Illuminated or Automotive Lighting(e.g. Dashboard e Lights) ro Incandescent Lamps Steps,Exit Ways,Etc.) l Luminaire All dimensions are in mm.
atings at Ta = 25C Symbol IF IFP VR PD Topr Tstg Tj Rth JA Rth JS Absolute maximum Rating 70 200 5 225 -40 ~ + 100 -40 ~ + 100 +110 300 150 Unit mA mA V mW C C C C /W C /W
2
duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
ptical Characteristics ( Ta = 25C) )
Symbol VF IR
Condition IF =50mA VR = 5V
Min. -------
Typ. 2.6 --2500
Max. 3.2 10 ---
Unit V A mlm
Notes
IF = 50mA V RoHS Compliance
The of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or IV levels IF =50mA 1120 1800 --mcd
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment IF =50mA 584 591 596 nm D (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
21/2
IF = 50mA
---
60
---
deg
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2/4 CLD-CT87.000
Format #: COTCO-D-074
REV.4
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tape pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LM2-TYL1-F1-N1-00001 Description SMD 60 Amber 591nm, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT87.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LM2-TYL1-F1-N1

	To Download LM2-TYL1-F1-N1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .