View IGW15T120_1254278.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IGW15T120
^
TrenchStop Series
Low Loss IGBT in Trench and Fieldstop technology
* * * * * * * * Approx. 1.0V reduced VCE(sat) compared to BUP313 Short circuit withstand time - 10s Designed for : G E - Frequency Converters - Uninterrupted Power Supply Trench and Fieldstop technology for 1200 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior NPT technology offers easy parallel switching capability due to positive temperature coefficient in VCE(sat) Low EMI Low Gate Charge Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ VCE 1200V IC 15A VCE(sat),Tj=25C 1.7V Tj,max 150C Package TO-247AC
C
P-TO-247-3-1 (TO-247AC)
Type IGW25T120
Ordering Code Q67040-S4515
Maximum Ratings Parameter Collector-emitter voltage DC collector current TC = 25C TC = 100C Pulsed collector current, tp limited by Tjmax Turn off safe operating area VCE 1200V, Tj 150C Gate-emitter voltage Short circuit withstand time Power dissipation TC = 25C Operating junction temperature Storage temperature Soldering temperature, 1.6mm (0.063 in.) from case for 10s Tj Tstg -40...+150 -55...+150 260 C
1)
Symbol VCE IC
Value 1200 30 15
Unit V A
ICpul s VGE tSC Ptot
45 45 20 10 110 V s W
VGE = 15V, VCC 1200V, Tj 150C
1)
Allowed number of short circuits: <1000; time between short circuits: >1s. 1 Preliminary / Rev. 1 Jul-02
Power Semiconductors
IGW15T120
^
TrenchStop Series
Thermal Resistance Parameter Characteristic IGBT thermal resistance, junction - case Thermal resistance, junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Static Characteristic Collector-emitter breakdown voltage Collector-emitter saturation voltage V ( B R ) C E S V G E = 0V , I C = 0 .5m A VCE(sat) V G E = 15 V , I C = 15 A T j =2 5 C T j =1 2 5 C T j =1 5 0 C Gate-emitter threshold voltage Zero gate voltage collector current VGE(th) ICES I C = 0. 6m A, V C E = V G E V C E = 12 0 0V, V G E = 0V T j =2 5 C T j =1 5 0 C Gate-emitter leakage current Transconductance Integrated gate resistor IGES gfs RGint V C E = 0V , V G E =2 0 V V C E = 20 V , I C = 15 A 10 none 0.2 2.0 100 nA S 5.0 1.7 2.0 2.2 5.8 2.2 6.5 mA 1200 V Symbol Conditions Value min. typ. max. Unit RthJA TO-247AC 40 RthJC 1.1 K/W Symbol Conditions Max. Value Unit
Power Semiconductors
2
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
Dynamic Characteristic Input capacitance Output capacitance Reverse transfer capacitance Gate charge Internal emitter inductance measured 5mm (0.197 in.) from case Short circuit collector current
1)
Ciss Coss Crss QGate LE IC(SC)
V C E = 25 V , V G E = 0V , f= 1 MH z V C C = 96 0 V, I C =1 5 A V G E = 15 V T O - 24 7A C V G E = 15 V ,t S C 10 s V C C = 6 0 0 V, T j = 25 C
-
1100 100 50 85 90
13 -
pF
nC nH A
Switching Characteristic, Inductive Load, at Tj=25 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(on) tr td(off) tf Eon Eoff Ets T j =2 5 C , V C C = 60 0 V, I C = 1 5 A, V G E =- 15 /1 5 V , R G = 56 , 2) L =1 8 0n H, 2) C = 3 9p F Energy losses include "tail" and diode reverse recovery. 50 30 520 60 1.3 1.4 2.7 mJ ns Symbol Conditions Value min. typ. max. Unit
Switching Characteristic, Inductive Load, at Tj=150 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(on) tr td(off) tf Eon Eoff Ets T j =1 5 0 C, V C C = 60 0 V, I C = 1 5 A, V G E =- 15 /1 5 V , R G = 5 6 2) L =1 8 0n H, 2) C = 3 9p F Energy losses include "tail" and diode reverse recovery. 50 35 600 120 2.0 2.1 4.1 mJ ns Symbol Conditions Value min. typ. max. Unit
1) 2)
Allowed number of short circuits: <1000; time between short circuits: >1s. Leakage inductance L an d Stray capacity C due to dynamic test circuit in Figure E. 3 Preliminary / Rev. 1 Jul-02
Power Semiconductors
IGW15T120
^
TrenchStop Series
tp=2s
40A
IC, COLLECTOR CURRENT
IC, COLLECTOR CURRENT
30A
TC=80C
10A
10s
20A
TC=110C
50s 1A 150s 500s 20ms
Ic
10A
Ic
0A 10Hz
100Hz
1kHz
10kHz
100kHz
0,1A 1V
DC 10V 100V
1000V
f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 150C, D = 0.5, VCE = 600V, VGE = 0/+15V, RG = 56)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 150C;VGE=15V)
100W
IC, COLLECTOR CURRENT
Ptot, POWER DISSIPATION
80W
20A
60W
40W
10A
20W
0W 25C
50C
75C
100C
125C
0A 25C
75C
125C
TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj 150C)
TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE 15V, Tj 150C)
Power Semiconductors
4
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
40A VGE=17V 30A 15V 13V 11V 20A 9V 7V 10A
40A VGE=17V 30A 15V 13V 11V 20A 9V 7V 10A
IC, COLLECTOR CURRENT
0A 0V 1V 2V 3V 4V 5V 6V
IC, COLLECTOR CURRENT
0A 0V 1V 2V 3V 4V 5V 6V
VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25C)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 150C)
40A 35A
VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE
3,0V 2,5V 2,0V 1,5V 1,0V 0,5V 0,0V -50C
IC=30A
IC, COLLECTOR CURRENT
30A 25A 20A 15A 10A 5A 0A TJ =150C 25C 0V 2V 4V 6V 8V 10V 12V
IC=15A IC=8A IC=5A
0C
50C
100C
VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V)
TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V)
Power Semiconductors
5
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
td(off)
1s td(off)
t, SWITCHING TIMES
100ns
t, SWITCHING TIMES
tf
100ns
tf
td(on) tr
td(on) 10ns tr
10ns
1ns
0A
10A
20A
1ns
10
35
60
85
110
IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=150C, VCE=600V, VGE=0/15V, RG=56, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ=150C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E)
td(off)
VGE(th), GATE-EMITT TRSHOLD VOLTAGE
7V 6V 5V 4V min. 3V 2V 1V 0V -50C max. typ.
t, SWITCHING TIMES
100ns tf td(on) tr
10ns
0C
50C
100C
150C
0C
50C
100C
150C
TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=56, Dynamic test circuit in Figure E)
TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.6mA)
Power Semiconductors
6
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
*) Eon and Etsinclude losses due to diode recovery
5 mJ
*) Eon and Ets include losses due to diode recovery
Ets*
E, SWITCHING ENERGY LOSSES
E, SWITCHING ENERGY LOSSES
8,0mJ
4 mJ
6,0mJ
3 mJ
Eon*
4,0mJ Ets* 2,0mJ Eoff Eon* 5A 10A 15A 20A 25A
2 mJ
Eoff
1 mJ
0,0mJ
0 mJ
5
30
55
80
105
IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, TJ=150C, VCE=600V, VGE=0/15V, RG=56, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, TJ=150C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E)
*) E on and E ts include losses due to diode recovery
6mJ
*) Eon and Ets include losses due to diode recovery
E, SWITCHING ENERGY LOSSES
E, SWITCHING ENERGY LOSSES
4mJ
5mJ 4mJ 3mJ 2mJ 1mJ Ets*
3mJ E ts * 2mJ E off 1mJ E on*
Eoff Eon*
0mJ
50C
100C
150C
0mJ 400V
500V
600V
700V
800V
TJ, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=56, Dynamic test circuit in Figure E)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical switching energy losses as a function of collector emitter voltage (inductive load, TJ=150C, VGE=0/15V, IC=15A, RG=56, Dynamic test circuit in Figure E)
Power Semiconductors
7
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
Ciss
VGE, GATE-EMITTER VOLTAGE
1nF
15V
240V 10V
960V
c, CAPACITANCE
100pF
Coss Crss
5V
0V
0nC
50nC
100nC
10pF
0V
10V
20V
QGE, GATE CHARGE Figure 17. Typical gate charge (IC=15 A)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz)
tSC, SHORT CIRCUIT WITHSTAND TIME
15s
IC(sc), short circuit COLLECTOR CURRENT
12V 14V 16V
125A
100A
10s
75A
5s
50A
25A
0s
0A
12V
14V
16V
18V
VGE, GATE-EMITTETR VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE=600V, start at TJ=25C)
VGE, GATE-EMITTETR VOLTAGE Figure 20. Typical short circuit collector current as a function of gateemitter voltage (VCE 600V, Tj 150C)
Power Semiconductors
8
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
VCE, COLLECTOR-EMITTER VOLTAGE
IC, COLLECTOR CURRENT
600V
VCE
30A
30A
600V
400V
20A
20A
400V
IC
10A 200V
200V
10A
0V
IC
0us 0.5us 1us 1.5us
VCE
0A 0A 0us 0V 0.5us 1us 1.5us
t, TIME Figure 21. Typical turn on behavior (VGE=0/15V, RG=56, Tj = 150C, Dynamic test circuit in Figure E)
t, TIME Figure 22. Typical turn off behavior (VGE=15/0V, RG=56, Tj = 150C, Dynamic test circuit in Figure E)
ZthJC, TRANSIENT THERMAL RESISTANCE
10 K/W D=0.5
0
0.2 0.1 10 K/W
-1
0.05 0.02 0.01
R,(K/W) 0.121 0.372 0.381 0.226
R1
, (s)= 1.73*10-1 2.75*10-2 2.57*10-3 2.71*10-4
R2
C 1 = 1 /R 1
C 2 = 2 /R 2
single pulse
10 K/W 10s
-2
100s
1ms
10ms
100ms
tP, PULSE WIDTH Figure 23. IGBT transient thermal resistance (D = tp / T)
Power Semiconductors
9
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
TO-247AC
symbol
dimensions
[mm] min max 5.28 2.51 2.29 1.32 2.06 3.18 21.16 16.15 5.72 20.68 4.930 6.22 min 4.78 2.29 1.78 1.09 1.73 2.67 20.80 15.65 5.21 19.81 3.560 6.12
[inch] max 0.2079 0.0988 0.0902 0.0520 0.0811 0.1252 0.8331 0.6358 0.2252 0.8142 0.1941 0.2449 0.1882 0.0902 0.0701 0.0429 0.0681 0.1051 0.8189 0.6161 0.2051 0.7799 0.1402 0.2409
A B C D E F G H K L M N
P
0.76 max
0.0299 max
3.61
0.1421
Q
Power Semiconductors
10
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
1
Tj (t) p(t)
r1
r2
2
n
rn
r1
r2
rn
Figure A. Definition of switching times
TC
Figure D. Thermal equivalent circuit
Figure B. Definition of switching losses
Figure E. Dynamic test circuit Leakage inductance L =180nH an d Stray capacity C =39pF.
Power Semiconductors
11
Preliminary / Rev. 1 Jul-02
IGW15T120
^
TrenchStop Series
Published by Infineon Technologies AG, Bereich Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Power Semiconductors
12
Preliminary / Rev. 1 Jul-02

▲Up To Search▲

Price & Availability of IGW15T120

	To Download IGW15T120 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .