 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FLGA-SD Fine Pitch Land Grid Array - Stacked Die * Stacking of die allows for more functionality in an array molded, cost effective, space saving package solution * Available in 1.2mm (TFLGA), 1.0mm (VFLGA), and 0.8mm (WFLGA) maximum thickness * Thinner than FBGA * Exposed thermal/mechanical lands available * Laminate substrate based enabling 2 and 4 layers of routing flexibility FEATURES * 2 to 7 die stack with spacer capability * Flexible body sizes range from 4mm x 4mm to 13mm x 13mm * Package height at 1.0, 1.2, 1.4mm max * Flexible die stacking options ("pyramid," "same die," etc.) * 0.5mm minimum land pitch, flexible land pattern * Flash/SRAM/PSRAM/Logic/Analog combinations * JEDEC standard package outlines * Die thinning to 75um (3mils) capability * Low loop wire bonding; reverse and die to die * Up to 2mm die overhang per side * Halogen-free and Low-K wafer compatible BOM DESCRIPTION STATS ChipPAC's chip stack technology offers the flexibility of stacking 2 to 7 die in a single package. Die to die bonding capability enables device and signal integration to improve electrical performance and reduce overall package I/O requirements. Wafer thinning technology, overhang wire bond technology, and the use of spacers between stacked die provide the flexibility to stack almost any desirable configuration of die in one package. This capability uses existing assembly infrastructure, which results in more functional integration with lower overall package cost. The use of the latest packaging materials allows this package to meet JEDEC Moisture Resistance Test Level 2a with Lead-free reflow condition. This is an ideal package for cell phone applications where Digital, Flash, SRAM, PSRAM and Logic are stacked into a single package. APPLICATIONS * Handheld devices * Wireless RF * Analog * ASIC * Memory * Simple PLDs www.statschippac.com FLGA-SD Fine Pitch Land Grid Array - Stacked Die SPECIFICATIONS Die Thickness Mold Cap Thickness Marking Packing Options 75-165m (3-6.5 mils) 0.45-0.9mm Laser Tape & reel/JEDEC tray RELIABILITY Moisture Sensitivity Level Temperature Cycling High Temp Storage Pressure Cooker Test Temperature/Humidity Test Unbiased HAST JEDEC Level 2A, 260C Reflow Condition C (-65C to 150C), 1000 cycles 150C, 1000 hrs 121C/100%RH/2atm, 168 hrs 85C/85% RH, 1000 hrs 130C/85% RH/2 atm, 96 hrs ELECTRICAL PERFORMANCE Electrical parasitic data is highly dependent on the package layout. 3D electrical simulation can be used on the specific package design to provide the best prediction of electrical behavior. First order approximations can be calculated using parasitics per unit length for the constituents of the signal path. Data below is for a frequency of 100MHz and assumes 1.0 mil gold bonding wire. Conductor Component Wire Net (2L) Total (2L) Wire Net (4L) Total (4L) Note: Net = Total Trace Length + Via Length (mm) 2 2-7 4-0 2 2-7 4-9 Resistance (mOhms) 120 25 -110 145 - 230 120 25 - 110 145 - 230 Inductance (nH) 1.65 1.10 - 4.35 2.75 - 6.00 1.65 0.70 - 2.95 2.35 - 4.60 Inductance Mutual (nH) 0.45 - 0.85 0.25 - 2.27 0.70 - 3.12 0.45 - 0.85 0.17 - 1.57 0.62 - 2.42 Capacitance (pF) 0.10 0.20 - 0.90 0.30 - 1.00 0.10 0.30 - 1.05 0.40 - 1.15 Capacitance Mutual (pF) 0.01 - 0.02 0.05 - 0.41 0.06 - 0.43 0.01 - 0.02 0.05 - 0.41 0.06 - 0.43 CROSS-SECTION FLGA-SD PACKAGE CONFIGURATIONS Body Sizes (mm) Terminal Count Terminal Pitch (mm) Typ. Pkg. Thickness 4x4 to 13x13 8 to 200 0.5 to 0.8 TFLGA-SD: 1.2mm VFLGA-SD: 1.0mm max. WFLGA-SD: 0.8mm max. Corporate Office 10 Ang Mo Kio St. 65, #05-17/20 Techpoint, Singapore 569059 Tel: 65-6824-7777 Fax: 65-6720-7823 Global Offices USA 510-979-8000 JAPAN 81-3-5789-5850 CHINA 86-21-5976-5858 MALAYSIA 603-4257-6222 KOREA 82-31-639-8911 TAIWAN 886-3-593-6565 UK 44-1483-413-700 NETHERLANDS 31-38-333-2023 The STATS ChipPAC logo is a registered trademark of STATS ChipPAC Ltd. All other product names and other company names herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. STATS ChipPAC disclaims any and all rights in those marks. STATS ChipPAC makes no guarantee or warranty of its accuracy in the information given, or that the use of such information will not infringe on intellectual rights of third parties. Under no circumstances shall STATS ChipPAC be liable for any damages whatsoever arising out of the use of, or inability to use the materials in this document. STATS ChipPAC reserves the right to change the information at any time and without notice. (c)Copyright 2006. STATS ChipPAC Ltd. All rights reserved. May 2006 |
Price & Availability of FLGA-SD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |