View LAW57B-FYGY-24_796098.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Golden Dragon(R) LA W57B, LY W57B
Besondere Merkmale * Gehausetyp: weies SMD-Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf * Wellenlange: 617 nm (amber), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 20 lm/W * Gruppierungsparameter: Lichtstrom, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 24-mm Gurt mit 800/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B Anwendungen * Verkehrssignale * Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, Heckleuchte, Blinkleuchte) * Ersatz von Kleinst-Gluhlampen * Tragbare Beleuchtung z. B. am Fahrrad, Taschenlampe * Dekorative Lichtleiter-Anwendungen * Signal- und Symbolleuchten zur Orientierung * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Fassadenbeleuchtung im Innen- und Auenbereich
Features * package: white SMD package, colorless clear * feature of the device: point lightsource with high luminous efficiency and low space * wavelength: 617 nm (amber), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 20 lm/W * grouping parameter: luminous flux, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 24-mm tape with 800/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B
Applications * traffic signaling * backlighting (illuminated advertising, general lighting) * Interior and exterior automotive lighting (e.g. dashboard backlighting, rear combination lamp (RCL)) * substitution of micro incandescent lamps * portable light souce (e. g. bicycle, flashlight) * decorative and entertainment lighting (incl. fiber optic illumination) * signal and symbol luminaire for orientation * marker lights (e.g. steps, exit ways, etc.) * indoor and outdoor commercial and residential architectural lighting
2003-09-23
1
LA W57B, LY W57B
Typ Emissionsfarbe Color of Emission Lichtstrom Lichtstarke Bestellnummer
Type
Luminous Flux IF = 400 mA V (mlm) 13000 ... 24000 13000 ... 24000
Luminous Intensity IF = 400 mA IV (mcd) 6000 (typ.) 6000 (typ.)
Ordering Code
LA W57B-FYGY-24 LY W57B-FYGY-26
amber yellow
Q65110A0371 Q65110A0372
Anm.: -26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsdrittelgruppen. Einzelne Helligkeitsdrittelgruppen sind nicht bestellbar. In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsdrittelgruppe enthalten. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1. Note: -26 Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a family group of 4 individual luminous intensity third groups. Individual luminous intensity third groups cannot be ordered. No packing unit / tape ever contains more than one luminous intensity third group. Dimming range for direct current mode max. 5:1
2003-09-23
2
LA W57B, LY W57B
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (TA=25C) Stostrom Surge current t 10 s, D = 0.005, TA=25C Sperrspannung1) Reverse voltage (TA=25C) Leistungsaufnahme Power consumption (TA=25C) Warmewiderstand Thermal resistance Sperrschicht/Lotpad Junction/soldering point 2)
1) 2)
Symbol Symbol LA
Wert Value LY - 40 ... + 100 - 40 ... + 100 + 125 400 500
Einheit Unit C C C mA mA
Top Tstg Tj IF IFM
VR Ptot
12 1.2
V W
Rth JS
18
K/W
fur kurzzeitigen Betrieb geeignet / suitable for short term application Montage auf PC-Board - Metallkernplatine, = 1.3 W/(m*K), fur weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com). Mounted on PC board - metall core PCB, = 1.3 W/(m*K), for further Information please find the application note on our web site (www.osram-os.com).
2003-09-23
3
LA W57B, LY W57B
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 400 mA Dominantwellenlange 1) Dominant wavelength 1) IF = 400 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 400 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage 2) IF = 400 mA Sperrstrom Reverse current VR = 12 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 400 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 400 mA; -10C T 100C Temperaturkoeffizient vonVF Temperature coefficient of VF IF = 400 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 400 mA
1)
Symbol Symbol LA (typ.)
Werte Value LY 594 624
Einheit Unit nm
peak dom
617
-5/+7
587
-7/+8
nm
(typ.)
18
15
nm
(typ.) (typ.) (max.) (typ.) (max.) (typ.)
2
120 2.2 2.6 0.01 10 0.13
120 2.2 2.6 0.01 10 0.13
Grad deg. V V
VF VF IR IR TCpeak
A A
nm/K
(typ.)
TCdom
0.06
0.10
nm/K
(typ.)
TCV
- 3.0
- 3.0
mV/K
(typ.)
opt
20
20
lm/W
Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
2)
2003-09-23
4
LA W57B, LY W57B
Wellenlangengruppen fur Dominantwellenlange Wavelength groups for dominant wavelength
1)
Gruppe Group 2 3 4 5 6
yellow min. 580 583 586 589 592 max. 583 586 589 592 595
amber min. 612 616 620 max. 616 620 624
Einheit Unit nm nm nm nm nm
Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm.
Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group FY FZ GX GY Lichtstrom Luminous Flux V (mlm) 13000 ...15000 15000 ...18000 18000 ...21000 21000 ...24000 Lichtstarke Luminous Intensity IV (mcd) 4700 (typ.) 5500 (typ.) 6500 (typ.) 7500 (typ.)
Lichtstromwerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous Flux is tested at a current pulse duration of 25 ms and a tolerance of 11%.
Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: FZ-3 Example: FZ-3 Lichtgruppe Luminous Intensity Group F Drittelgruppe Third Group Z Wellenlange Wavelength 3
2003-09-23
5
LA W57B, LY W57B
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 400 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100
OHL00013
Irel
% 80
60
V
yellow
amber
40
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20 10 0
OHL01660
1.0
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 0
2003-09-23
6
LA W57B, LY W57B
Durchlassstrom IF = f (VF) Forward Current TA = 25 C Relative Lichtstarke IV/IV(400 mA) = f (IF) Relative Luminous Intensity TA = 25 C
OHL00787
IF
10 3 mA
10 1
OHL00788
IV I V (400 mA)
10 2
10 0
10 1
10 -1
10 0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
V 2.8
10 -2 10 1
10 2
mA
10
VF
Maximal zulassiger Durchlassstrom IF = f (TS) Max. Permissible Forward Current
450 mA IF 400 350
1.2
OHL01787
IF
Relative Lichtstarke IV / IV(25 C)= f (TS) Relative Luminous Intensity IF = 400 mA, amber
1.6
OHL00987
IV IV (25 C)
300
1.0
250
0.8
200 150 100 50 0 0 20 40 60 80 C 100
0.6 0.4 0.2 0 -40 -20
0
20
40
60
C 100
TS
2003-09-23 7
T
LA W57B, LY W57B
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LA
0.6 IF A 0.5
OHL01012
0.4
0.3
0.2
0.1
D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1
D= T
tP
tP
IF T
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
tp
2003-09-23
8
LA W57B, LY W57B
Mazeichnung Package Outlines
6.2 (0.244) 5.8 (0.228) 1.9 (0.075) 1.7 (0.067) Heat sink Cathode marking C
(o4.2 (0.165)) 7.2 (0.283) 6.8 (0.268)
0...0.1 (0.004)
2.0 (0.079) 1.6 (0.063) 1.0 (0.039) 0.8 (0.031)
A
0.29 (0 0.24 (0 .011)
.009)
GPLY6092
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung: Markierung Cathode mark: mark Gewicht / Approx. weight: 0.2 g
2003-09-23
9
1.2 (0.047) 0.8 (0.031) 11.2 (0.441) 10.8 (0.425)
LA W57B, LY W57B
Lotbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4
IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
300 C
T
250
240-245 C 10-40 s 183 C 120 to 180 s ramp-down rate up to 6 K/s defined for Preconditioning: up to 6 K/s ramp-up rate up to 6 K/s
200
150
100
50 defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 s 2
t
2003-09-23
10
LA W57B, LY W57B
Empfohlenes Lotpaddesign Recommended Solder Pad IR-Reflow Loten IR Reflow Soldering
Achtung: Kathode und Heatsink sind elektrisch verbunden Attention: Cathode and Heatsink are electrically connected
3 Lotstellen 3 solder points 14.4 (0.567) 3.0 (0.118) Thermisch optimiertes PCB Thermal enhanced PCB
Footprint
o4.0 (0.157) 15.0 (0.591) 14.4 (0.567)
0.3 (0.012)
o4.0 (0.157)
Lotstopplack Solder resist
Kupfer Copper
3.0 (0.118)
OHAY0681
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2003-09-23 11
10 (0.394)
Recommended Solder Pad Design
3.0 (0.118)
Empfohlene Padgeometrie
3.0 (0.118)
LA W57B, LY W57B
Montage auf PC-Board - Metallkernplatine, = 1.3 W/(m*K), fur weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com). Mounted on PC board - metall core PCB, = 1.3 W/(m*K), for further Information please find the application note on our web site (www.osram-os.com).
Gurtung / Polaritat und Lage Verpackungseinheit 800/Rolle, o180 mm Method of Taping / Polarity and Orientation Packing unit 800/reel, o180 mm
11.5 (0.453)
4 (0.157) 1.55 (0.061) 2 (0.079)
1.75 (0.069)
0.3 (0.012)
12.4 (0.488)
7.35 (0.289)
0.3 (0.012)
Heat sink
C
24 (0.945)
6.35 (0.250) 8 (0.315)
1.9 (0.075)
A
OHAY0509
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Anm.: Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC.
2003-09-23
12
LA W57B, LY W57B
Revision History: 2003-09-23 Previous Version: Page 8 14 1 3 3 2003-08-27
Date of change
Subjects (major changes since last revision) Permissible Pulse Handling Capability note: dry pack ESD norm ambient temperature Thermal resistance 2003-06-25 2003-08-27 2003-08-27 2003-08-27 2003-09-23
2003-09-23
13
LA W57B, LY W57B
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don't represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
Anm.: Gema IEC 60825-1 (EN 60825-1) gilt:
LED STRAHLUNG NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN LED KLASSE 1M
Note: according IEC 60825-1 (EN 60825-1):
LED RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LED PRODUCT
2003-09-23
14

▲Up To Search▲

Price & Availability of LAW57B-FYGY-24

	To Download LAW57B-FYGY-24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .