View MCR310-10_742455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MCR310 Series
Preferred Device
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
Designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface. * Center Gate Geometry for Uniform Current Density * All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability * Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability * Low Trigger Currents, 200 mA Maximum for Direct Driving from Integrated Circuits * Pb-Free Packages are Available
MAXIMUM RATINGS (TJ = 25C unless otherwise noted.)
Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = -40 to 110C) (1/2 Sine Wave, RGK = 1 k) MCR310-6 MCR310-8 MCR310-10 On-State RMS Current (TC = 75C) Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = -40 to 110C) Circuit Fusing (t = 8.3 ms) Peak Gate Voltage (t p 10 ms) Peak Gate Current (t p 10 ms) Peak Gate Power (t p 10 ms) Average Gate Power Operating Junction Temperature Range Storage Temperature Range Mounting Torque Symbol VDRM or VRRM 400 600 800 IT(RMS) ITSM I2t VGM IGM PGM PG(AV) TJ Tstg - 10 100 40 5 1 5 0.75 -40 to +110 -40 to +150 8 Amps Amps A2s Volts Amp Watts Watt C C in.-lb. Value Unit Volts 4
http://onsemi.com
SCRs 10 AMPERES RMS 400 thru 800 VOLTS
G A C
MARKING DIAGRAM
1
MCR310-xG AYWW 2 3
TO-220AB CASE 221A STYLE 3 x A Y WW G = 6, 8 or 10 = Assembly Location = Year = Work Week = Pb-Free Package
ORDERING INFORMATION
Device MCR310-6 MCR310-6G Package TO220AB TO220AB (Pb-Free) TO220AB TO220AB (Pb-Free) TO220AB TO220AB (Pb-Free) Shipping 500/Box 500/Box
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 2.2 60 Unit C/W C/W
MCR310-8 MCR310-8G
500/Box 500/Box
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. (1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
MCR310-10 MCR310-10G
500/Box 500/Box
Preferred devices are recommended choices for future use and best overall value.
(c) Semiconductor Components Industries, LLC, 2007
1
March, 2007 - Rev. 3
Publication Order Number: MCR310/D
MCR310 Series
ELECTRICAL CHARACTERISTICS (TC = 25C, RGK = 1 k unless otherwise noted)
Characteristic Peak Forward Blocking (TJ = 110C, VD = Rated VDRM) Peak Reverse Blocking Current(1) (TJ = 110C, VR = Rated VRRM) Current(1) TC = 110C TC = 25C TC = 110C TC = 25C Symbol IDRM IRRM VTM IGT VGT -- 0.1 IH dv/dt tgt -- -- -- 0.5 -- -- 10 1 1.5 -- 6 -- -- mA V/ms ms Min -- -- -- -- -- -- Typ -- -- -- -- 1.7 30 Max 500 10 500 10 2.2 200 Unit mA mA mA mA Volts mA Volts
On-State Voltage (ITM = 20 A Peak, Pulse Width p 1 ms, Duty Cycle p 2%) Gate Trigger Current, Continuous dc(2) (VD = 12 V, RL = 100 ) Gate Trigger Voltage, Continuous dc (VD = 12 V, RL = 100 ) (VD = Rated VDRM, RL = 10 k, TJ = 110C) Holding Current (VD = 12 V, ITM = 100 mA) Critical Rate of Rise of Forward Blocking Voltage (VD = Rated VDRM, TJ = 110C, Exponential Waveform) Gate Controlled Turn-On Time (VD = Rated VDRM, ITM = 20 A, IG = 2 mA)
1. Ratings apply for negative gate voltage or RGK = 1 k. Devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. 2. Does not include RGK current. TC , MAXIMUM CASE TEMPERATURE ( C) 120 110 PAV , AVERAGE POWER DISSIPATION (WATTS) 20 dc 16 12 8 4 0 = 30 60 90 = CONDUCTION ANGLE
= CONDUCTION ANGLE = 30 60 90 180 dc
100 90 80 70 0 4 6 8 IT(AV), AVERAGE ON-STATE CURRENT (AMPS) 2 10
180
0
2 4 6 8 IT(AV), AVERAGE ON-STATE CURRENT (AMPS)
10
Figure 1. Average Current Derating
3 NORMALIZED GATE CURRENT 2 VD = 12 Vdc
Figure 2. On-State Power Dissipation
VGT , GATE TRIGGER VOLTAGE (VOLTS)
0.7 VD = 12 Vdc 0.6 0.5 0.4 0.3 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 TJ, JUNCTION TEMPERATURE (C) 120
1
0.5
0.3 -40
-20
0
20 40 60 80 90 100 TJ, JUNCTION TEMPERATURE (C)
120
140
Figure 3. Normalized Gate Current
Figure 4. Gate Voltage
http://onsemi.com
2
MCR310 Series
PACKAGE DIMENSIONS
TO-220AB CASE 221A-07 ISSUE AA
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 CATHODE ANODE GATE ANODE MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04
-T- B F C
SEATING PLANE
T
S
4
Q
123
A U K
H Z L V G D N J R
STYLE 3: PIN 1. 2. 3. 4.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
3
MCR310/D

▲Up To Search▲

Price & Availability of MCR310-10

	To Download MCR310-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .